SUNLU PLA Plus 3D Printer Filament, 1.75mm PLA+ 3D Filament for FDM 3D Printer & 3D Pens, Neatly Wound Filament, Strong and Toughness, Dimensional Accuracy +/- 0.02 mm, 1KG Spool(2.2 LBS), Orange

So I ordered this to try it out. I have a Flashforge Adventurer 3 and I typically stick to their own brand of PLA, mostly because the built in spool holder only takes 500g spools and because I can be pretty sure their own filament will work well. Boy was I wrong.Before this spool arrived I printed off a couple of Tush rollers to hold the spool externally because as me ruined above, these spools are too big for the Adventurer 3. The spool worked just fine on a pair of Tush rollers. No resistance all good.I then ran a print using an old job stored on the printer. I have a little bunny rabbit print that I use as a benchmark, mostly because my youngest likes to get a new bunny rabbit when Daddy gets some new PLA but also because the model is tough enough to print that it challenges the printer but easy enough that I won't get stuck in an infinite loop of troubleshooting that doesn't matter because I never print anything that is insanely complicated or at the limits of 3D printing. I intentionally spend time making sure anything I print is oriented in a way that makes it easier or I modify it to make it less challenging.Anyway, on to the PLA+...first print was perfect and I didn't have to adjust anything. Print settings were 0.18mm layers, cooling off first layer, 60c bed (glass bed, I have the Pro model) and 220c nozzle. No raft. No brim.I got a clean print, no stringing, perfect adhesion and no warping or layer issues. The final result was a sort of matte finish with a small amount of sheen.I've printed with black PLA before and you typically get that shiny black drainpipe look but with this stuff, it's quite tasteful. It's not as flat as you'd expect though, definitely shiny but not overly shiny. Your prints won't look cheap.The stand out here though is the very low amount of stringing. It's virtually none existent. There is a tiny bit of really fine stringing but it's very easy to deal with after the print. Absolutely nowhere near the amount of stringing I usually see.I think this brand might be my go to from now on. Good stuff.In terms of toughness Vs standard PLA...my lad hasn't snapped the ears off his bunny yet, which he usually manages within a few minutes. So I'm guessing this stuff is a lot tougher than Flashforge PLA.I've since run off some other prints that I know to be quite weak with Flashforge PLA and so far they have proven to be a bit stiffer and less fragile. I'd place this stuff somewhere between standard PLA and ABS.If you're looking at this stuff and you're like me and wondering if straying from your usual stuff is worth it, the answer is probably yes.At this stage I don't know how well the roll will keep, some other rolls from other brands have got brittle on me after a while, which is another reason I typically didn't buy bigger spools.

Bought 3 rolls of these filaments so far, works brilliantly on ender 3 neo. I printed these with 215C with 60C bed resulted in perfect large prints no warping, very little no to stringing and no nozzel blockage.

The finish is good and slightly pinker than the photo shows. Perfect for dolls and any item requiring skin colour.

Bought both gold and silver coloured filaments. Very easy to work with... Prints very nicely. Adheres well and releases easily from my glass/corundum printer bed. My main issue with these are the colours; the "Gold" filament is straw coloured, and the "Silver" filament is light grey. There is no metallic effect, which was a little disappointing. I already use SunLu filaments (PLA+ and PETG) and would definitely buy this brand again.... just not for metallics!

Been using sunlu for about a year. Great brand, never any issues with product. Just got myself a deal with a sale that was running so stocked up for a few months

Not had any issues with this filament. Would recommend

The media could not be loaded.  After using so many SUNLU filaments now, it become my number one choice on PLA filaments. In my first review below I mentioned that my first SUNLU filament required drying, I don't get that anymore, they print very well, and they are now shipping with resealable bags. My last filament from SUNLU was a gray one and it was exactly the shade that I was after for my MMU project, I'm quite happy with the filament, and I'll keep buying more.Previous Review:This PLA+ is my first SUNLU filament, and initially I had all kinds of issues with it, and my main issue was layer adhession. Then I started to play with different flow rates and temperatures, but none was necessary as the main problem was that the filament was not dry enough and my printer needed some adjustments. After drying the filament for 10 hours with a proper filament dryer, using a relatively higher temperature (225-235 ºC), and then tuning and aligning my printer (X-Gantry was crocked, bed needed tramming and the Z-Offset was quite a bit off) the prints started to come off beatifully. I think this is a very nice alternative to my regular eSUN PLA+ filaments, albeit needing some drying.

Have used this filament for a while and never had any problems at all.

Buen filamento se imprime facil

Took a while to reach the correct settings. Then again, I’m new at 3d printing. Only expirience with PLA before this.

Très joli film et surtout bien costaud et brillant pour impression 3D

lässt sich super drucken und schaut gut aus

Bea resultat