XFLOC4 | Line Output Converter with Digital Noise Filter and Line Driver

I bought a cheap radio to replace the trash factory radio in my Ford fiesta, ended up really liking the cheap jvc radio. I then decided to install a 1000w system with a skar amp. The radio didn't have the line out ports for it so I wired this into the cheap radio instead of spending 200 on another radio. Worked great, sounds perfect. Thank you 🙏.

Easy install. Perfect delivery. Very good quality sound

Worked perfectly to adapt the front/rear channels of my OEM heat unit to 4 channels of full range amplification. I ran 17 ft of twisted shielded pair cable to the rear of my truck, through this converter, to rear mounted amps for all channels and back up to the receiver location for integration into the OEM speaker wire harness. I cannot detect any noise in the system above what the OEM receiver already produced. The system sounds great and I couldn't be more pleased with this unit for making it all work.

Just thrown in a bag and you figure it out, I expect that when buying something used. Not even a post-it note saying good luck. And yes, I'll figure it out.

If you buy an Android auto stereo, YOU WILL NEED a line-out converter to install an aftermarket amplifier. Cut the high-level outputs [the speaker wires from the head unit to the factory harness] and wire to this line-out converter to the side going to the head unit. Then wire the amp high-level output [plugs that came with your amp] to the side going to the factory harness. Ensure you wire the 12v positive [red] from the line-out converter to the head unit 12v positive, the negative wire from the line-out converter [black] to the head unit negative, and the remote amp signal [blue] to the external amplifier remote signal input. Test and enjoy.

Good product from good company Wish the wires were labeled or labeled better

I bought a pioneer GM-D8704 amplifier after watching videos and reading reviews about how good the high level inputs were and separate videos on how it over delivers on amp dyno. Well it seemed to have plenty of power but my infinity speakers had very little bass handling before distorting and seemed to sound flat. I was very unhappy with the stereo I just spent a ton of money and time installing. To wrap it up $20 dollars later this NVX 4 channel line converter instantly brought it to life. I have enough bass that I will be skipping the sub and running just my two 6x9 and 6.5 components off the factory radio. Just an FYI instructions are lacking on the nvx so if you're not using the remote turn on from the nvx converter you do not need the power/ground just connect the speaker wires.

Muy bueno , funciona muy bien anteriormente compré otro de otra marca el cual no funcionó para nada lo compré por la marca pero no fue, con dudas compré este y me encantó no podía creer que desapareció todo ese ruido molesto de el motor en mi amplificador ahora si puedo escuchar música con gusto buen producto lo recomiendo y es fácil instalarlo

Works