GKOLED Low Voltage LED Deck Lights, Landscape Step Stair Railing Light with 2W Integrated LED Chips, Die-cast Aluminum 12V AC/DC Accent Lighting Fixtures with Black Powder Coated Finish (4-Pack)

These are very good lights. Easy connections too. Nice warm light and not blue or cold.

Moved into a new house recently and there was no light on one side of the house. After researching, I chose these, and I could not be happier. I did not need a lot of light and I also wanted something where the wires did not go out the back so I could mount them without putting the wires into the side of the house.I did put some silicone caulk around the opening at the bottom where the wire comes out. That was probably not needed. Also, the rubber backing was only held on with double stick tape and some fell off, so I used rubber cement to put them back on. I bought a DEWENWILS 60W Outdoor Low Voltage Transformer, and SUNVIE Low Voltage Fastlock Wire Connectors which made installation a breeze. I could have used a lower wattage transformer, but for a few bucks more I got the 60W in case I decide to add something else to the system. You can see the difference in the before and after images.

a little dim for what I expected, but very solidly built and easy to mount.

I replaced the expensive lights my installer used after almost all of them died within a few years. These were easy to swap out and a lot more affordable. But the major selling point for me is that they are sealed. The other lights I had wasps would nest in them, and they probably failed because the LED board is exposed more to the elements. I bought a bunch of these to have some as spares but not a single one has failed on me yet. Highly recommend these. I like the light level and color spectrum as well, very pleasing for my rather large deck to just have that nice glow, plus as safety on the stair rails.

We have bears and a few other critters. The cameras we have can operate at night but their infrared has a limited range. I initially installed 4 of these, about 10 ft apart, and 6 ft high to illuminate the lower terrace. They were actually too bright. I changed to 3 lights, 15' apart, and 3 ft high. Perfect. Nice warm color and just bright enough to see well. The cameras function better too.

You do need to wire directly into the feed wire because does not have the "pinch clips" but for my installation I would have had to cut the clips off anyways so for me worked out. I like the light color and brightness. I bought six and just ordered another 6. In photo the lights are the 3 on lower deck. I replaced older lights that looked exactly the same because the bulbs kept burning out. Going to do that everywhere now.

This product only has 2 LEDs, so it produces a very low amount of light.The biggest issue with this product is the fact the cover does not fully engage.There are 3 small tabs on the cover that engage and then a small twist completes the installation.However the dimensioning is bad and the cover can not completely engage during the rotation.The product is cast aluminum, so I used a razor knife to remove a small of material from each tab and then I was able to complete the rotation.If you have a Dremel tool, it would be easier to grind a small amount from each tabs to achieve a good fit.I also added a small amount of lube to each tab to allow for a smoother rotation.Installing the base is easy with the screws supplied.It does have a removable rubber backing to aid in sealing the back side.For my purpose of illuminating the edges of a new deck, I would not recommend this product.

I ended up using these a little differently than other reviewers here. These lights replaced well lights that really didn't cut it when sitting in the stone around the firepit. So these were mounted on flagstone after using the drilling template and a masonry drill bit. They are secure, bright, durable, and have a much better aesthetic than what was their prior.