HUANUO Single Monitor Arm Desk Mount for 13 to 32 inch Screens, Tool Free Height Adjustable Monitor Stand with Tilt Swivel Rotate, 75 & 100mm VESA Mount, Load 19.8 lbs, C-clamp & Grommet Options

Are you tired of your monitor hogging all your desk space like a greedy cat? Meet the HUANUO Single Monitor Arm Desk Mount, the superhero your workspace deserves! 🦸‍♂️ Dynamic Design: This monitor arm is like the Swiss Army knife of desk mounts. It fits screens from 13 to 32 inches and can handle up to 19.8 lbs – that’s like lifting a small dog! 🐶 With its tool-free height adjustment, you can easily tilt, swivel, and rotate your monitor to find that perfect angle, whether you’re working, gaming, or binge-watching your favorite shows. Ergonomic Excellence: Say goodbye to neck and shoulder pain! This monitor arm promotes healthy habits by allowing you to adjust your screen to eye level. It’s like having a personal chiropractor for your desk. 💆‍♂️ Space Saver: The HUANUO arm frees up more than 80% of your desk space. Now you can finally find a spot for that oversized coffee mug collection or your pet rock garden. 🌿☕ Easy Installation: If assembling furniture makes you break out in a cold sweat, fear not! This monitor arm comes with detailed instructions and can be set up in just 5 minutes. It’s so easy, even your cat could do it (if they had opposable thumbs). 🐱👍 Sturdy and Secure: Made from aircraft-grade aluminum alloy, this monitor arm is tougher than your morning coffee. It won’t sag or wobble, no matter how intense your workday gets. Plus, it’s compatible with both 75x75 and 100x100 mm VESA mounts, so it’s ready for action.

The monitor arm is well built, easy to install, and holds the monitor securely without any wobble. The adjustments are smooth, making it easy to position the screen exactly where I want it. It has helped free up desk space and feels very solid. I'm very happy with the purchase and would recommend it.

Holds a monitor well, have a MSI PRO MP271 E14A 27" as a secondary monitor and this arm is perfect for pulling it out in use and hiding it away when not in use. Seems fairly sturdy as well. Just be patient when setting it up and always have some protection/support under monitor as you do need to manually adjust the tension, super easy to do, but the monitor will fall or randomly shoot up if not careful. Only real issue is the vertical tilt adjustment, very stiff to angle upwards and when angling down almost falls down and no way to adjust.

Really solid and quality feeling stand, able to hold heavier/wider monitors with ease. Very basic to setup too

I've 'upped' in size my monitor for my Mac Mini and stepped up to a 27" LG 4k monitor The main issue is my desk isn't that deep and to have it on its stand, on a riser, it'd be a bit too close unless I set it at an angle and I'm not keen on that This arm clamps to the desk cleanly and fitted the monitor without any issues. Took me all of 6mins to get it fitted, attached to the desk and switched on. Very impressed and would highly recommend

I was after a monitor arm so that I can use my PC and PS5 from my chair as I am disabled. There are lots to choose from and I settled on the HUANUO product. A good quality monitor arm. Made of metal painted black, with good quality black plastic cable management. It fits easily with the clamp to my side table. There are instructions for those tables with a lip, you will need a small wood block to fill the gap. It holds my 27" LG Gaming monitor well, and at an angle suitable for me. I can also fold back the monitor with ease when not in use. There are supplied Allen keys should you need to adjust the tension for heavier monitors. I have not yet needed to adjust any tension it works out of the box. Do not over tighten the screws when assembling the arm just enough to still turn the arm. Very pleased with my choice so far and for less than £40 quid well worth it.

Very well made, strong and secure. Once adjusted works very well and easy to move to new positions. Used with a 27" LG TV. My desk is quite thin so used a block of wood under the base to make it thick enough for the screw clamp to work, it is though very secure and has shown no signs of coming undone in the months I've been using it.

I bought this to free up space on my desk, and to give me a bit more flexibility with my monitor, which is a 32" and weighs around 6kg. So far, it has done the job admirably. It is very sturdy for the most part and feels well made and durable. The parts fit together very easily and set-up took very little time overall, as the individual pieces click together, with just a little allen key adjusting to tighten. The vesa mount is easy to attach as well, and my monitor (which has 100 by 100 set up) was able to easily slip onto the top screws, which held it in place while I screwed n and tightened the others. Adjusting the arm is very easy, and feels stable, I'm far from an expert but the gas mechanism seems to be doing the job. Its effortless to raise or lower, but then holds steady once you let go. A couple of quibbles I'd highlight. There is some very minor wobble when typing a lot, but its not hugely noticeable and I haven't found it bothering me. This may also be related to the fact that my desk is on a carpeted floor, which has a bit more give than hardwood. It's also less noticeable the less extended the arm is, so if you're planning to use at full extension that's worth considering. The other thing worth noting is that the clamp used to fix the base to your desk needs to have flat contact on both sides. This is important as a lot of desks have crossbars that connect the legs underneath. If you have this kind of desk, you'd need to use something to allow that flat contact, e.g. a block of wood the same width as the cross bar. I didn't find this issue hard to solve, and this might be a consistent issue across most monitor arms, but worth noting. Overall, this is a very good piece of kit. I'm sure there are better monitor arms out there, but for my use-case it does the job admirably. For the price, its an easy recommend.

Amazed by the flexibility of this thing. Really can turn at any weird angles which helps my work. I’m able to turn the monitor to face the visitors as well back to an angle where people standing could see. Love the hydraulic sound that comes with it that sounds like robocop. Only downside is I still haven’t figure out how to loosen the adapter holding the monitor. The instruction is to use the Allen key but it doesn’t fit. Need to check online on this

Facile à monter et de bonne qualité

Perfect fit for my Lenovo legion r27s and it is very smooth and it has a very nice spring, easily adjustable and it fits on lots of desks, but it isn’t very stable on very large desks which have a big table top height, either way its a very good monitor arm and I would recommend this because its very stable and cheap

Awesome

I have 3 ultra-wide 34-inch monitors on my desk. The included stand has both tilt and height adjustments but being curved screens, the monitor intrudes onto my desktop space. This is not a big issue with the 2 monitors, but the 3rd needs to be moved occasionally to access the mini-pc behind it. I needed to type of swing-arm style mount to not only clear a little bit of desk space but also be able to easily move the 3rd monitor without having to lift it. This Huano single-mount monitor arm fits my requirements perfectly. I can now swing the monitor a lot easier when needed. Assembly and installation were fairly easy. I appreciate the 3-piece base which allowed me to set it up and clamp it without having to move my desk. The two swing arms were easy to assemble and lock in place. The tension was enough to hold my 6+ kg monitor / 14 pounds (as listed on the manufacturer's website). All parts and tools needed to assemble were included in the box (including 3 sizes of Allen keys and a Phillips screwdriver). No need for any additional tools (unless you were going for a through-desk mounting). My only issue was the upper cable guide which seemed relatively limited and harder to fit. I was only able to pass 4 cables through the guide (power, dp, hdmi and usb). Fortunately, these were enough (instead of the usual 9 cables). Overall I am very happy with this mount and I am glad I didn't cheap out with other brands.