FlexzillaPro Air Hose Reusable Fitting, 1/4 in. - RP900250

I used this to replace the factory fitting on my 1/4" coil hose. This piece is very high quality with great fit and finish, and it's incredibly quick and easy to install. Depending on the material of the hose you are repairing, it may require a fair amount of force to get it over the barb. I was having a difficult time getting mine on so I heated it up slightly and it went on with ease. The compression fitting pinches the hose tight in place so there is no way it will come off. I set my regulator to its max pressure at 160psi and dipped it underwater to check for leaks but didn't see so much as a trace of a bubble forming after several minutes, it seals up tight!

The media could not be loaded. I bought a couple of the 1/4" fittings so that I could split a 50' hose into 15' and 35'. The spiral portion is plastic and provides much better strain relief than the stiff rubber that they use on the original flexzilla hose. The two fittings (barb and cap) are made of a strong aluminum that's been anodized to be black. I was able to really wrench the fittings together and nothing deformed or stripped. However, some of the black scratched off, so i assume that after years of use there wont be much black left and they'll just be silver aluminum.Cutting the flexzilla hose was easily done with a razor blade. Do make sure you get a nice 90 degree cut then you can go ahead and slip the strain relief on followed by the threaded cap. Once those are on the hose you can go ahead and press the barb into the hose. This takes a decent bit of force but can easily be done without adding any lubrication. Just make sure you get the hose fully seated on all sides.After the hose is fully seated on the barb you can pull back the cap and thread it on. You'll need two wrenches to tighten it down. Keep going until it wont go any farther.Now you can slide the strain relief up. It is designed to click into place, however it takes wayyyy more force than you can muster with just your hands. I had to jam the tip into the floor and lean my body weight onto it before it would click on. I don't think it's ever coming off, so that may be an issue if you plan on reusing this multiple times.The tip thread is tapered to yield a nice seal when you attach your final fitting. I was left with roughly 1/8" thread still exposed after i tightened things down.You could certainly get by with just inserting a normal barbed fitting and using a hose clamp, but this thread-on cap approach yields a much nicer result. It also doesn't have any sharp parts exposed, unlike a hose clamp.

I like these line adapters. The price is great, both swivel and non swivel work just fine so far. These have very little time on them, I don't know how long they will last, but for now there perfect.Installation is fairly easy with a drop or 2 of wd40 for lube they push right into the hose, lock it down and good to go.5-stars, highly recommended.

I bought a large 100' flexzilla air hose with the intention of cutting it and making a shorter hose to use in my workshop (instead of always taking out the larger hose or fiddling with the hose reel. Tip: To do this you need to purchase two of these reusable ends; one for your new hose and one for your existing hose. I was impressed with how easy they made the whole process. I literally had my 10' hose made in 5 minutes and my regular longer hose repaired in another 3 minutes once I was comfortable with making the first one. Here's another tip: If you have any of that Ideal clear cable pulling gel, a little of that on the part that receives the hose will make your life easier; that or a little spit. ;-) Legacy makes great stuff for air tools. This is no exception. Well-constructed, anodized, aircraft quality aluminum was used in these to withstand the rigors of your workshop or job site. I would highly recommend and I would purchase this product again. If you find my reviews helpful, please let me know and I'll continue to write them on products I purchase here on Amazon. I heavily rely on others' reviews before making any purchases online.

Picked up a 50' with wonderment on how well it would hold up. The hose likes to pick up dust and dirt, but even in the dead of winter it remains flexible. Extra couple ends and modification to make a few lengths. The ends are worth having around and the Flexzilla product in general is a winner. 1/4" is what I've been using and have my sights on the 3/8" for higher volume needs. Can actually say it's a pretty fantastic product.

This makes fixing the flexzilla very easy, fast and as good as new

I believe I have the correct part, but getting the hose to reach the point of contact for the "compression" end onto which the hose connector is threaded was quite a struggle! After not getting the little "nub" correctly inserted, it blew apart, but a second attempt to get it correctly "fitted/inserted" together worked. :-) I cannot attest to its durability, but I am delighted with the "repair" at this point. I better understand how to do such a repair in the future, if required and the price was definitely GOOD! I have no regrets. :-)

Used these to split the hoses for my four tire inflation/deflation kit that I built. They are tight fitting. They do not leak.

This is the same fitting that comes mounted to the "Flexzilla Pro" hose assemblies. The built in strain relief is more flexible compared to the original series. I used these on a different brand (Magnum) 1/4" hybrid hose and the fit was perfect. Those crappy hose clamp type fittings cut into the hose and are always getting snagged on whatever is in your work area.The Fexzilla fittings do cost more but I think they are worth it, a well made design.

Perfect fitting, bye bye Crimping

Amazing fitting! Make sure you realize this is for the small types of hose. It adds strength, makes the hose look bad ass with how bold this is. If you pair this with a colourful or unique fitting then you will have a styling hose that is as unique as we each are.

I liked how the fix kit made it look like it was a factory fitting when installed. Easy to use and more durable then original piece

You won't find a better air hose connection than this. I couldn't tell you how many times I've cut or damaged an air line and just shorten it with the reusable connection. Buy far if you're a 310T or 310S these are great.