OwnMy Heavy Duty Adjustable Leveling Feet Corner Protector Guard Brackets

These made leveling new kitchen base cabinets simple. Our house is very old, and making the floors perfectly flat was not an option. A job that might have taken all day using shims took only a couple of hours. As others have noted, you might want/need to use other screws. To achieve a zero elevation at the highest point in the cabinet run, I simply left one off the high corner (I could have removed the foot, but why bother). The feet are solid and simple to install, and adjusting them is a breeze. When I got everything leveled, I did insert plastic shims as well, but I'm a belt-and-suspenders kind of guy.

These are very strong and easy to install. You will need to pretrial for the screws as they are just wood screws. Also these go around or inside a corner. Easy to adjust also.

The dimensions state that it's 1.5" tall, and the figure is a bit unclear whether that includes the lower tab -- it does NOT include the lower tab, which is another 3/8". So if you're attaching to the edge of 2x4 dimensional lumber, it's too tall, and you need another 3/8" of material between the board and the tab. Also, the included screws are too big -- the OD of the threads doesn't fit through the holes in the brackets, so you have to screw them through, while leads to binding and a very difficult install. In addition, the heads are too big to clear the shaft of the foot, so you have to back that all the way out to have a straight shot to drive the screw. I replaced them with #8 screws and it went much better.

I used these leveling feet on cabinets I installed in my basement workshop where the concrete floor was not even. What a game changer! I saved a lot of time and aggravation leveling each cabinet so each one feels quite solid. It was worth the money. I liked this version because each foot screwed into 2 sides of the cabinet which should distribute the load on the cabinet more evenly.

Just as described in the listing. Arrive on time. Good value.

I've used this style adjuster several times for kitchen cabinets with floors that are greatly out of level; usually, when I know that I'm going to have to use more than 1 shim per corner or if the floor is off level against the direction of travel when setting the cabinets. Just use a plug or button to cover the hole.

Installed these on cabinets in an uneven garage. Worked great.

I bought these to use on a bed frame that needed to be adjustable for uneven floors. they work well but are visible at certain angles and need to be so they may be adjusted. Overall quite sturdy and of good quality.

Fabrication satisfaisante