WALI Freestanding Dual Monitor Stand for 13-27 inch Screens, 22 lbs per Arm

This ended up being a great purchase so far. It comes with both the freestanding option as well as a mounting option and you don't need to drill too big of a hole if you decide to mount it into the desk. So far it has shown to be very sturdy. All of the brackets are nice and secure. It was relatively easy to put together I'd say. Just make sure you're paying attention to the directions of how things are placed is my biggest advice. Very good at hiding the wires and it comes with nice brackets to help with that. Very affordable and I love how my office looks now.

Amazing value for this stand. I needed a stand with more degrees of freedom than the original one that came with my monitor, and this stand (which was inexpensive relative to the cost of the monitor) was a great purchase. The base of the stand is a little bulky/high, and the soft material on the bottom of it can rub off very easily if you let the stand catch the back edge of your desk. Otherwise though, the stand is extremely easy to install, and it provides far more degrees of freedom for rotation and translation than the original stand for my monitor. Now my monitor is sitting at a comfortable viewing angle closer to my desk tilted slightly upwards toward me. Just keep in mind that you have to tighten down the height and tilt adjustments (the things that would be affected by gravity). So, if you want to adjust those frequently, this stand might not be a great fit for you. That said, it does provide a hidden but easy-to-access spot to store the keys needed to loosen it up to make those adjustments. So, if you need to make those adjustments, you'll always have quick access to the necessary tools. Highly recommended for its price in particular.

WALI Dual Monitor Stand: A Solid, Space-Saving Base Camp I needed to reclaim some real estate on my crowded desk, and this WALI freestanding mount did the trick. It's a straightforward, no-frills solution that holds my two 24-inch monitors securely and opens up a ton of space underneath. Assembly is intuitive, though having a second pair of hands is helpful when you're attaching the monitors to avoid any tipping. The all-metal construction feels sturdy and reliable. The adjustments are basic but effective—you can raise or lower both monitors together on the central pole and tilt or swivel them individually to get the angles just right. The included cable management clips are a nice touch for keeping things tidy. The key thing to understand with any freestanding mount is balance. If you extend the arms all the way out toward you, the whole unit can get top-heavy and want to tip forward. I keep my monitors positioned more centered over the heavy base, and it's perfectly stable. It's not meant for dramatic, extended poses. For the price, it's fantastic value. It doesn't have the infinite, fluid adjustability of high-end gas-spring arms, but it doesn't need to. It lifts your monitors, frees up your desk, and does its job without any fuss. Bottom Line: An excellent, budget-friendly way to lift two monitors and dramatically increase your usable desk space. Just be mindful of the center of gravity and don't expect ultra-flexible, independent positioning.

This is an extremely sturdy monitor stand. Easily assembled in less than 20 minutes. Instructions were simple. The hex tools came with the stand, but you just need a Nr 2 Phillips Screwdriver for the bolts mounting the VESA plate to the monitor. Take note that this stand has a heavy base to hold larger/heavier monitors up to 22 lbs, but does not take a lot of space. I chose this variant so that it could handle my heavy 24-inch Planar monitor. The included cable management clip was a nice touch. Rotation and tilt feature moves easily and has decent range. I'm very happy with my purchase and it was available for overnight shipment in my region.

I have no complaints with this stand. It is not as nice as the Inland brand sold at MicroCenter, but it does its job. It beats the price of the MicroCenter one, thats for sure. It comes with all the hardware you might need, even long screws and bushings if you have a display that needs them. Assembly was quick. It comes mostly assembled anyway. You have to put the bottom on the post then attach the assembled arms to the post. Setting up can be a challenge but with help, its easy. After mounting the bracket on the back of the displays, you just slide them into the receiver on the arms. Once mounted, adjusting the position is simple, but can take a while as there are several joints which can be positioned to angle the displays as you like. The cord clips do an OK job of cord management, but the clips are not as good as the Inland ones. They do the job, but not as durable. I broke the one that goes on the post, but I tried getting it to hold a wad of wire. My fault. I recommend this stand.

Works well clean and useful

I had two monitors sitting on their stock stands eating up half my desk real estate. Installing this mount was one of those purchases that immediately made me wonder why I waited so long. The setup is straightforward. The V-base is stable and heavy enough to hold things steady without grommet mounting, though a grommet hole option is included if you prefer it. Each arm supports tilt, swivel, rotation (landscape to portrait), and full height adjustment on the center pole, giving you a lot of flexibility to dial in exactly the ergonomic position you want. Cable management clips on the arms and along the pole keep things tidy. It fits monitors up to 27 inches and handles up to 22 lbs per arm, which covers the vast majority of consumer displays. The VESA compatibility covers both 75x75mm and 100x100mm mounting patterns, so check your monitor's back plate before ordering. The arms hold position well once adjusted, and the overall build quality is noticeably solid for the price. At over 22,000 ratings and a 4.3 average, the community verdict is pretty clear on this one. Highly recommended.

I have two 21" monitors (heavier Lenovo and much lighter Acer) so I wanted this dual-monitor stand to consolidate their footprints to regain more space on my desktop. ASSEMBLY: After the first 3 steps, you would definitely need a helper to slide in the monitor and hold it while you screw on the nut and continue holding it (or the stand will topple over) while you attach the second monitor. Since my two installed monitors are of different weights, the stand initially toppled over. It was only when I adjust the arms to a "W" shape that the stand was able to support both different weight monitors without toppling over. (For about 10-15 min. until we reached this zen configuration, I was worried that we would need to disassemble the entire stand to return it.) You may not have this issue if you have equal weight twin monitors. Note, some screw holes on the stand did not allow for easy screwing. I needed to use more force to get the screws to screw in all the way. EASE OF USE: This budget stand is definitely rough around the edges. It only allows you to tilt the monitors without a tool. If you want to adjust the height, you would need a helper to hold both monitors while you loosen the bolt with the provided wrench to adjust the height and finally tighten the bolt. OVERALL: Once fully assembled and adjusted to my liking, this budget stand can hold 2 unequally weighted monitors and it is quite sturdy. For successful assembly, you must have a helper and be prepared for the initial hassles that I outlined.

easy to use.

Excellent for working from home with 2 screens

El producto supero mis expectativas en cuanto a calidad por el precio. Fue bastante facil de instalar y en cuanto a funcionalidad y acabado del material no le tiene nada que envidiar a otras bases que vienen con algunos monitores mas caros de marcas como Dell o LG ya que cumple y no se siente barato, la base y el brazo son de metal rigido y el color negro tiene un buen brillo elegante. Y al ser de base se me hace mas facil de transportar el monitor asi, no lo tienes que anclar o atornillar a la mesa y asi no dañas tu escritorio.

高さ調整ができないVESA対応の安いモニターを買ったので、このスタンドを付けました。 各パーツが厚みのある金属でできていて、とてもしっかりしています。 パーツが入った袋にアルファベットが打ってあり、説明書と照らし合わせながら簡単に組み立てることができます。 くみ上げた後にモニターの高さを微調整できたりと、工夫が凝らされています。 よくできた製品だと思います。 唯一残念だったのは、ポール下のネジ穴の精度が低かったことでしょうか。

So ganz kann ich manche Bewertungen nicht verstehen. Der Aufbau ist sehr einfach und selbsterklärend, das Produkt wirkt robust, allerdings hat der Ständer überall Macken im Lack oder die Beschichtung ist einfach nur billig. Für den Preis dann doch weitersuchen