EVIL ENERGY Oil Catch Can, Universal Baffled Catch Can Kit with Breather Filter, 300ml Aluminum Air Oil Separator Tank NBR Fuel Hose Kits for PCV System

the hardest part of the install is finding a place that you like to mount them, and finding out how to mount it there. other than that it was easy to install. i like that way they dress up the engine bay, the hoses arent bad at all and seem durable.

Straight forward install, quality is pretty good the bolt for the top incase u don’t wanna vent isn’t the best quality but it does its job with a few wraps of teflon tape so far I’ve had no leakage or issues

Instructions and photos aren’t really great, but it was easy to install. One hose comes from the valve cover and the other goes to the intake manifold. I bought the one with the breather filter and it whistles at idle. Have not checked at higher speeds yet. If the whistling gets annoying I’ll have to remove it and place the plug back in. I did need another 3 feet of hose. As for the product it was a good price and the it is made of good material and craftsmanship. Only time will show if the functionality works as stated, but so far it works fine and no leaks.

For my 2023 Nissan Frontier, I had to modify the bracket and use some nuts and bolts I had . I think the quality is superb and the cost was way below other units . The catch can size is also larger volume compared to higher priced alternatives. Another at about $169.0 comes with elbows and connectors that make using the old OUT hose from the pcv usable.. but you can reach the pcv and use the suppliedw hose, with patience and use the clamp supplies to attach. I used the original clamps from the pcv hose..no longer needed..to give the visual at the catch can a factory blended look.. at the catch can. Because near buy and in other spaces the squeeze type clamps are used and they all match.. I choose Blue..for my Blue pro 4 x and to remind me when I open the hood... To check it!! Lol lastly, the unit has a dip stick for easy. Spot checking! Perfect! If recommend this if you are handy. I cut the bracket on the the flat end at the length I liked and drilled new holes where I needed them I took off the bracket mount attached to the can and used it to mark up the spacing for holes I drilled..if any interest maybe I'll upload a picture..🤔 happy motoring! ✌️

Works great for my hemi . Never realized so much went back in the motor. Easy to install and has a great look and cleans up the vacuum line

Just finish installing and so far so good. It’s pretty easy to install.

Worked great but the instructions are a little confusing especially with the filter material

After using it for over two months, the product is good—and excellent considering its price.

The inlet and outlet are marked on the opposite side. I plumbed the fresh air going out the "in" side. (the side with mesh) and the dirty air coming in the "out". As for the product its self it seems great and well built. I did haft to fabricate a different bracket, however that was only due to my application

I chose to try this oil catch can even though it is half or a third of the price of brands from other suppliers and was really surprised at the high quality of the parts. Even the hose supplied was a proper fuel hose type. Installation was super easy and everything fit well. I used a bit of silicone grease on the threads of the canister to help stop the binding. The kit did not come with teflon tape for the bars fittings but probably not needed as there are supplied o-rings for the seal at the fittings anyway. I’d recommend the kit

Didn't work on my jeep wrangler and i got engine light

Product came and had clearly been opened possibly a return product? Box had tears and looked like it was taped up by a 2 year old. Did NOT come with pictured baffle material and o rings were incorrect size for the fittings.

Excellent kit, looks and functions perfectly and was easy to install