🚀 Elevate Your Adventure with ICON!
The ICON 1.5" Lift Add-A-Leaf Kit is engineered for 1996-Up Toyota Tacoma and 00-06 Tundra models, providing a seamless lift of 1.5 inches. Made from durable aluminum, this kit enhances your vehicle's ride quality with progressive rate left springs, ensuring a smooth driving experience. Installation is straightforward, requiring only common tools, making it an ideal upgrade for any off-road enthusiast.
Brand | ICON ALLOYS |
Auto Part Position | Left |
Material | Aluminum |
Included Components | Icon Vehicle Dynamics 51100 96-Up Tacoma/00-06 Tundra 1.5" Add-A-Leaf Kit |
Maximum Lifting Height | 1.5 Inches |
Manufacturer | ICON Vehicle Dynamics |
UPC | 070000395123 840103402680 |
Global Trade Identification Number | 00840103402680 |
Model | 51100 |
Item Weight | 33 pounds |
Product Dimensions | 46 x 8 x 3 inches |
Item model number | 51100 |
Exterior | Machined |
Manufacturer Part Number | 51100 |
H**Y
Works great
Installed on a 2022 Trd off-road with the Trd lift kit installed (1/2" spacer and shock upgrade). Gave me 1 3/4 inch lift and the resulting front down rake gave me back 1 mpg. I could delete the spacer block and be level. It also works with my air bags and Daystar cradles but I really only use them for levelling my RTT, no longer need them to support load. Ride quality on and off road is excellent.
G**O
Great solution for a smoother ride and weight handling
Not difficult to install. Hardest part was removing the old factory overload springs. I was really impressed with the great ride with and without a load.
A**D
Installed on 2005 Toyota Tundra
Great product. All necessary hardware in the kit. U-bolts are a bright silver finish. Leaves are slathered in black paint, unfortunately it comes off a bit when you have to unbolt them during installation. The uncoated bolts are not desirable, they'll certainly rust over time. I replaced them with SS hardware: (4) 5/16"-18 X 3-1/4" and 5/16"-18 nuts. Also available from Amazon Small Parts.IF you remove the factory overload leaf, this leaf kit added about 1" of lift to my 10yr old Tundra, but that'll vary depending on the condition of your current leaf pack. Installation requires two jacks, one for the axle and one to lift the spring pack while you insert the new leaves.Finally, as indicated in the part description, it's true, the ride quality has improved. The bed doesn't jounce as much as before.
A**R
Not quite 1.5" on newer Tacoma V6 4x4 DCSB
Installed on 2021 Tacoma with 20k miles. Used 2nd gen Bilsteins in the front on the top notch and needed to add a 1" block in the rear in addition to these to make it look level. Total lift 2.5" front and 2.25" rear after adding 1" block. No extra weight front or rear. Ride is a little stiffer than stock and after adding 285 tires, a little harsher, but not bad for a lifted truck.
J**.
Perfect lift
These things lifted my truck right where I wanted it they ride great
A**R
Awesome
Bolted in easily enough. No directions. Had to look online. Part number on add a leaf didnt match for my year model truck but fit fine without modifications. Gave about 2” of lift at the moment. Lift may settle more over time.
C**Y
Incomplete
Springs missing from order. Will update when resolved.
T**H
Misleading
Icon states that adding a leave will decrease spring rate and will sag more under load. I added the overload spring back in and this is a waste of money. For street queens only. Get a full leaf pack instead if you are using your truck for towing or hauling.
J**I
23 TACO
Perfect fit and easy install for 23 tacoma offroad with a sagy back end
A**N
Check your UBolts and nuts before installing.
My UBolts came with flawed or incorrect treaded Nuts. Couldn’t Finnish install for several days till I was able to get replacements. Truck was on Jack stands on my driveway for three days because it was a holiday long weekend..
Trustpilot
5 days ago
1 day ago