GM245 Fuel Injector Seals Tools Set Perfectly Compatible with GM Subaru Engines, Replaces for #EN-49245, EN-51105 and #18683AA000

worked like it should , broke 2 seals then figured it out.

Good tool just wish it came with the part you put on the injectors before you put the o ring on and push the other tool up and the second one down to set it right and looks like brand new

On a Gen V 5.3 injector, the sizer tool WILL NOT WORK with Fel-Pro seals. The inside design of the tool is different than the factory tool and has a sharp bevel rather than the gradual taper of the OE EN-49245-4 tool. This causes the seals to push out of their groove and bind rather than be properly compressed and sized. I tried every trick in the book to get this tool to work including presizing with vacuum line and a hose clamp and could not get the sizer to slide on. It should be noted that the Fel-Pro seals sized with the GM tool but required notably more pressure to size than the GM tool with GM seals (that combination slid together like butter). It is possible that this tool might work with the GM OEM seals, I did not try that once I had use of the GM tool.

looks as described and worked as it should

Works well personally i only used one of the 4 tips deffinetly read instructions before using

This tool works as intended. I recommend checking the size needed to set the rings before you use it.

I loved the value for money on these fuel injectors. They’re easy to use and install and are very high quality. Good size.

I’m not a mechanic, and this is the only time I’ve ever used this tool so hard to leave a review about how good or poor this tool is. What I can say is that the first few seals I tried to use the sizer tool to co press ended up getting pushed further on to the fuel injector and getting ruined. So instead of using my fingers to compress the seals as the directions say, I used a zip tie to compress the seals initially, and then used the sizer tool to compress them to size and it worked great. I ended up using 2 zip ties per seal . 1 to compress the seal, and then one to even it out after the first tie left one side of the seal bulged out.

This tool is a must have for injector seals, I ordered, received next day and installed the seals in 20 minutes worked perfect and correctly

جيد جدا

Works great

Item seems decent but the sizer just rips the seals. Do not recommend this product

Everything but the sizing die worked fine. The Kent Moore tool k eneded up borrowing has a taper about 1/4 into each side so the seals are forced inward when you slide it on. The sizing die on this one is dead straight, and will tear the seal. Figure that out and it's a good home shop tool.