Stand Steady 6 Monitor Mount Desk Setup - Heavy-Duty Height Adjustable Monitor Stand, Swivel Arm with Clamp-On Base, 6 Screen VESA Mount Fits Most LCD/LED Monitors 17-32 in. (Silver, 6 Mounts)

The only negatives I have noticed with the assembly, is the monitor arm adjustments for the side monitors do not move very far due to the nubs on the bracket preventing some movement when trying to get the angle of the monitors setup. The tilting portion of the monitor brackets has to be tightened down extremely snug in order to get the monitors to hold in position without falling down. All 5 of my 6 monitors are all the same size and do not exceed the weight capacity for each mount since they are 23.6 inch monitors and my middle screen is a 32 inch which is under the rated weight capacity as well. The build quality for the parts is very good though and the whole assembly is very strong when clamped down the desk and I am happy that it allowed me to setup my screens in the best viewing orientation like I wanted. It does take a little bit of time to get the alignment for each screen setup. I have tried several monitor mounts that work well but this one does allow for a clean and nice setup. I would recommend it for anyone with multiple monitors

This is a very well built VESA system. I love it. let me start by saying, I have Engineering background and it takes a lot to impress me with any product. My rules are Simple: 1- Does the product work as advertised 2- is it well built 3- is it smooth and easy to use 4- Do I have to tinker with it all the time to keep it working (which means, is it wasting my time or helping me) 5- Value, meaning did I get my money's worth This product answers all of them and works well. Room for improvements: Yes, Instruction manual is not easy to follow, I have to think hard to follow which screw to use and in what order. I think they combined too many steps in to one to make it look simple but it is not. In the, I figured it out but I had to plan the steps ahead of time. Note: DO NOT START assembly before you figure out ALL of the steps and you layout all of the parts on the floor and really make it look like a movie script. Note 2: You will end up with extra parts because they provide you with multiple solutions for VESA attachment based on your monitor type. (Nice touch) Note 3: All of the monitors on one row has to be on the same level, Same size. No mixing and matching (27 and 34 inch will not work) Note 4: I am using Dell 27 inch 4K monitors, perfect fit. Finally, they included a small leveler with the kit, Thank you , Nice touch>

Buy this one. I don’t care if you only have 3 monitors, or 4 or 5, this is the one you want. I do agree with some other reviews that the range of motion is a little shallow, your monitor setup will be a little bit more “flat” versus U shaped, which could take some getting used to, and I may go rogue and trim down the nubbins that stop the arms from swiveling in all the way. However, this thing is BUILT SOLID. Everything is good, all of the hardware is excellent, they even supply grade 8.8 bolts. The monitors stay put, no shakiness whatsoever. Pro tips: if you’re an American used to freedom units, get a yardstick or tape measure that has metric indications. That would’ve made grommet mounting a little easier. I ended up measuring like eight times to ensure I only had to drill once. The spacing is 570mm which doesn’t translate easily into inches. A little WD-40 in the tracks makes getting your displays exactly where you want them easier, but ultimately you’re not going to be sliding them back and forth all the time so it being slightly tricky to do so honestly makes sense. I’ve had several different mounts in a variety of configurations from different brands. This is the only one I’ve found that has two vertical parts to hold everything up, and that makes all the difference. Every other one I’ve had has been shaky or unstable or sags over time. I’d be surprised if I ever have to buy another one.

tldr; it's not perfect but there's honestly not one that's better for this price. Preface: So if you're buying one of these you're probably part of that niche area within your profession. Your spouse, co-workers, friends, and family give concern as to why you need this many monitors. Anyways, because it's so niche there aren't many to choose from and my review is going to be calibrated for that. Material Quality: The quality on this is 5/5. Aluminum extrusions for the posts and beefy hinges (my VIVO ones sagged overtime). The clamps are SOLID. I like the small details they added like the transition from mount to desk and the end caps. And they also come with cable clips! Install: I've had better instructions but honestly. if you're buying one of these... you should be able to figure it out. Usage Pros: honestly the build quality is top notch. I feel comfortable placing the stupid number of monitors I think I need. Compared to other options (like VIVO) this is MUCH better. One thing I love about this mount is the height of the posts. they are tall allowing you to mount your bottom row monitors at proper ergo height. The top monitors are also able to have enough vertical wiggle room. Overall - you can tell a lot of thought went into the design and quality. its practical. Usage Cons: The ONE con about this product is the range of motion of the side monitor arms. They are limited to about 30 degrees. This means that if you want your monitors to be "flush" from side to side, the edges of the side monitors will be unreadable (since its too far). I've opted to go with the staggered approach which looks kinda ugly but it works. However, this kind of makes sense in my opinion. swinging the arms super far inwards (so that you're embraced by the warmth of your monitors because you're an loner) puts a lot of strain on the structure. I'd like to think someone smarter than me (who designed this) did this on purpose. Customer service: One of the hinges had been mis-threaded. They literally sent me a replacement arm within 12 hours.

This product it perfect for those looking for a solid multi monitor mount. I wanted more than one base/desk attachment point for holding up my 3 monitors. This works perfectly. I have a 32 inch LG QHD in the middle with 27 inch LG QHDs on either side. It is sturdy! I did buzz off the little nubs on either arms as suggested by other users but even if you do not do that they still move with a wide range. I could have left off the second cross piece designed for use with monitors 4-6 but added it for some "extra" support with 4 points of contact instead of 2. I actually attached a bulletin board there for notes. Installation was easy and took about 45 minutes as I went slow and steady. I do recommend using a tape measure that has metric as the hole placement is in millimeters unless you want to use the C-clamp method. I also added a piece of scrap 2x4 under the desk at each post to increase the surface area foot print. Overall an excellent item that is well built, sturdy and easy to install. Strongly recommend this product!

Assembled yesterday. For me at least. Assembly was super easy. So far it seems stout enough. Currently I am running 3 x 32" 2k displays on the bottom. The middle is an LG ultragear the sides are AOC AOGs. The AOC displays are very heavy and I have them all the way out so you can't apply much more stress to these arms. They are not twisting or flexing "yet". Only minor issue is there is no single screen height adjustment. So if you don't have matching models you may run into alignment issues like mine has. Not sure if you can see it. Not a huge deal but may drive some people crazy. Just get matching screens and there is no issue. Also the range of motion on the side arms is minimal. Not a problem though. Take a small saw, or in my case I used my reciprocating saw with a steel blade and cut the small bump tabs off. Now I have full swing motion on the arms. But beware. Those bump stops are there to avoid extreme pressure that this setup wasn't designed for. You could run into a failure with the right conditions. But so far mine is holding up good. Overall I like it. Is clean. Strong and easy to assemble. Wish they offered a powder coated black versdion. I will end up painting mine black at some point. Good product

This works great! I tried 4 other models and had to return for different reasons seems one pole mounts can't hold the weight of 6 monitors even if they are light, was never able to be properly leveled.

This is such a waste of money. We’re do I even begin. The threads for the c clamp were not threaded straight so it was a fight to get 6 of the 8 screws in. There were metal shavings all over the inside. To move the bars up and down is a fight and the arms have such a limited range of motion. Only tilting in about 5 degrees then any further adjustment is via the monitor tilt. I have 3 30” monitors and 3 27" and they ended up almost straight across because of the limited tilt making it impossible the screens comfortably. You would need about at 4-5 foot deep desk to comfortably use this. The monitors height adjustment screw has some kind of plastic guard that for some reason slides with the adjustment and gets jammed preventing the screw from going up and down. I had to take the monitor off and take the bracket off and hold it make a turn press the plastic down make a turn and hold it. It took me about 30-40 minuets a piece to adjust each one and even after all that with the bottom 3 monitors at the lowest and the top three at the highest the monitors dont lign up maybe because the outer arms bend. one was bent upwards and the other downwards. I disassembled the hinge to see if mayber the spacers were the problem and its not the case the issue is something in the casting. And worst of all the customer support was a joke they either never answer the call and you on endless hold or they just ingore your email. Im sorry at $300 I expected way better out of this thing. I spend 9 hours across 2 days taking things apart to move this here or put that there in an effort to try and make it work as amazon would allow me to return it before I talk to Stand Steady support and as mentioned good luck getting a hold of them. So I'm stuck with a $300 paperweight.

It's the most sturdy monitor stand I have seen. It's well made and easy to put together. I did find that the vertical swivel joints were not strong enough for heavier 32" monitors. No matter how much I tighten the bolt on the joint the mounts droop and won't stay in position. The tools provided with the kit were not adequate for tightening these swivel joints. I had to use a 3/8" ratchet with an Allen key socket. I will try adding Star Washers to the joint replacing the smooth washers provided to see if that adds enough grip.