TH6320ZW2003 T6 Pro Series Z-Wave Stat Thermostat & Comfort Control, Smart Home

No se pudo usar, se devolvio porque llegaron quebrados

It's a nice looking product and I think it has good functionality. However, it is not suitable for the Z-wave frequency band in Europe so I needed to return it. It is intended for use in US/Canada.

I have it connected to home assistant, and its been working perfectly for 2 years now. Never restarted. Running on power with c wire, not battery. Great unit.

When I first ordered this they sent me the wrong one, they sent me the WiFi version. I sent it back and reordered this Z-Wave version again and I got it a few days later. This one fully works with Hubitat and it actually has it's own driver in Hubitat. If you are replacing an existing thermostat make sure you take pictures of where the wires are attached to the old one. You will not use all of the terminals and you need to make sure the wires go in the correct place otherwise you could mess up your HVAC. The instructions are fairly detailed and can be confusing if you're not sure what you are doing. I luckily had the instructions for my old one and that helped a lot. I have had this installed on a traditional forced air gas furnace and A/C and now installed it on a heat pump furnace and A/C. It comes with a larger back plate that you can use if needed, I liked the look without the back plate so that's how I installed it. The wires easily push in to place and once I had them there I mounted the base to the wall. The cover flips up to hide the wires. The main unit pushes onto the base. Once that is all done you need to go through the setup on the device and configure everything and boy can you configure EVERYTHING. The instructions also help out in detailing what each function does and the order of them. You need to make sure you configure it for the type of system that you have. Once that is all done you can go through and test each stage of the system to make sure everything is working how it should. After all of that I connected it to my Hubitat and got it setup in there. Overall this is a great thermostat and works well for controlling almost any kind of system and integrates into your smart house. The hardest thing is installing it and figuring out where each wire goes and making sure you have the switches set correctly and the thermostat configured correctly for your system. Make sure you read and reread the instructions for installation. Once you have it installed though it's a breeze to control and set schedules and everything. Pros: Z-Wave Fully works in Hubitat Great design (the base where the wires attached and the main unit that snaps onto that) Detailed instructions for installation Cons: Installation can be difficult (need to make sure wires are all in the correct places, switches set correctly and thermostat configured for your particular system)

I bought this to replace the old mechanical thermostat in my RV. I needed total control over heating and cooling to be sure it stayed comfortable for my dog while I’m away. Remote monitoring was also important in the event my heating or cooling failed. I chose this specific model because it will operate on batteries alone with no C wire attached. Because of my application, installation wasn’t straight forward. My gas furnace has just 2 wires, one with 12vdc. The rooftop AC has 4 wires, compressor, fan hi, fan low, and ground. This thermostat doesn’t have a connection for ground so I connected the ground from the AC directly to the RV ground wire. There is also no provision for fan speed in this thermostat so the fan low wire remains unhooked. The two remaining wires connected to compressor and fan on the thermostat. This is working great in my RV. In Auto mode it will call for heat or cooling as needed based on individual set points. I have not tried the schedule function as I have it connected to a z-wave hub. Once connected to a hub the internal scheduler is ignored. Scheduling can then be done through the hub app. I did not already have a z-wave hub so I purchased an exlo atom hub at the same time. This tiny hub plugs into USB power which allows me to keep it powered continuously from the RV 12v. The hub acts as a controller for the devices connected to it and a bridge to WiFi. The app for the hub requires an account but does not require any subscriptions. Once connected to the hub I have access to the thermostat through the hub app on my phone. The app displays the current temp/ humidity and allows changes to temp settings and mode. The hub also has access to all settings and outputs of the thermostat allowing integration with other z-wave devices through scripts and can send notifications. It remains to be seen how long the batteries will last. Battery level is displayed in hub app.