ICEBREAKER POP! - Ice cube trays (Pale Lemon)

I'm giving this FIVE STARS, despite some concerns. Why? Because regardless of my issues, this product does exactly what it claims to do, and it does it well! At least, so far. I've been using two of these for about a week now. I make at least one set of ice each per day. That means, I've made roughly 14-18 sets of ice so far and neither of my units have given me any trouble. Where I think people are going wrong is, frankly, not following directions. (1) There's a "max fill" line for a reason; water expands when it freezes, therefore, if you put water above the fill line, you're asking for cracks, leaks, and other issues. I filled to the line and poured out into a measuring cup – it's just a hair over 1 cup's worth of water, for those curious. (2) To break the ice into cubes you absolutely must press down with the palm of both hands - like when performing CPR - right in the center, basically on the strap. I press twice, flip, press twice, flip, press twice, flip, press twice. I don't normally need to press more than that. Ensure you are only pressing in the center of each side, never on the edges, and press pretty firmly. (3) Before you pull apart on the straps, be sure to open the cap! If you don't open the cap, you're probably going to end up with cracks, seal breaks, or broken trays. The cap must be opened before you pull apart because otherwise the suction prevents the halves from separating and puts extra stress on the plastic. (4) If you follow these steps, you don't really have to pull that hard. Sure, pull firmly, but not hard. The ice literally just "pops" out as the halves separate. I have yet to have any issues. Based on some of the negative reviews and some of the photos here, I just don't believe those folks are following the instructions. Many descriptions of leaking and bulging is likely attributed to overfilling beyond the "max" line. Many cracks and breaks is likely from people pulling so hard without opening the end or from them pressing in places other than the dead center. If you do have a leak, just press firmly around all the edges as it is certainly possible that the trays are not sealed fully. There should be no gaps between the outside of the tray (with the handle) and the tray itself. So what are my issues with the Nordic Icebreaker Pop 2.0? For one, let's start with the instructions. I've included a photo showing the conflicting directions regarding cleaning. When you open the unit for the first time, there's an insert that says to disassemble for cleaning. So I did. Boy was it difficult!!! It just would not come apart!! So I checked the little instruction booklet for tips, and there the instructions say specifically NOT to disassemble the unit for cleaning. This explains why it was so difficult to open up and clean (and an even bigger nightmare to reattach). Luckily I was able to get it all snapped back into place and sealed and have not had any leaks, but this is a major issue and could be part of people's issues with leaking after cleaning them. Secondly, I do have concerns about the longevity of the product. With the constant freezing and pressing and pulling, etc., etc., etc., I do worry that mini stress fractures will eventually start to form. It's just a thought for now, though; I haven't owned it long enough to say for sure, but just the physics of it all says the screws, handle, and/or plastic will eventually fracture. If it takes 10 years to fracture, then no issue, I got my value out of it. If it does so in 12 months or less, however, well – this thing is ridiculously expensive. Very overpriced, if you ask me – even though I'm very happy with it so far, I got it at it's lowest price ever during a recent pre-holiday sale. Even that was a bit high, but no where near as high as it's usual price. The point is, if it doesn't last, there's better value elsewhere. If it does, then money well spent, I suppose. Finally, it's a little unclear the difference between the original Icebreaker Pop and the Icebreaker Pop 2.0. The manufacturer's website is all but useless and clearly hasn't been updated (not to mention the grammatical errors, but I assume because English may not be their first language). Neither of the Amazon listing, nor any of the packaging or marketing materials, make clear what the difference is either. I also take issue with the lack of color options. Why so limiting? I'd love to get the Coca-Cola one, not for the branding, but because red is my favorite color! However, it's unclear whether that is the 2.0 version or not. All that being said, I still am giving this five-stars! Despite my concerns, I'm still overjoyed with how it's performed so far and having such large ice cubes for my water all day is wonderful! "Pro" Tip" I use a Tovolo ice cream container (the oval shaped one, 1.5 or 2.5 qt) to store my ice in. It's keeps it fresh and from absorbing freezer odors and it doesn't take up much space in the freezer either. By the time that container has emptied, both my Icebreaker Pop 2.0 units have solidified and produced me 18 more cubes a piece!

Excellent! Important note - this will make enough ice cubes to make a 24oz iced coffee drink. With that being said, this thing is awesome! I got it for work because sadly, there are a lot of less-than-hygienic people in my office and I've seen them reaching into the ice bin in the freezer with obviously dirty hands. I got sick of actually getting sick! And of not being able to have an iced drink in the day, so I brought my own ice solution. It's working great, just also know that you will want to keep this in a freezer in order to keep it solid ice. I experimented with my cooler bag where I keep my lunch with many ice packs, and the cubes in this still started to melt. Either way, I love this thing and it was totally worth it. Definitely worth it!

I have a bottom freezer drawer, no shelf to put an ice cube tray and no room to buy a bag and fit it in. Hard water would kill the icemaker in no time. I DO like it and it does work. I would give it 5 stars if it wasn't so hard to open (senior here) and wasn't so expensive, I would have bought two if I knew it worked this well. May buy another if the price comes down.

This was great for the ~7 months that I had it, but now it started leaking :( It first started leaking from the top about 4 months in, but no worries, I'll just store it up right. Now though I had to throw it out because it was leaking consistently from the bottom. I'm giving this a 3* because I've purchased this before for a friend who still has theirs, but they also don't use it regularly. I usually make ice about every 1-2 weeks. I enjoyed the ease of it, but I won't be purchasing it again in fear of it breaking again.

It took some time to get the hang of this ice tray but once I got it figured out, I really liked it. To release the ice, run hot water over all sides of it. Pull it out, and tada! you have ice. Occasionally the don't break apart completely, so you have to close it back and press on the sides to break them up. Sounds complicated but once you have it figured out, you'll like it. I also like that it stands up in my freezer and doesn't take up as much space as a traditional ice tray.

Mines did not work. I followed the directions. Filled the water up, under the max line. And it was a frozen block. I pushed down on both sides, expanded the panel, the ice was a complete frozen block. Itwasn't separated cubes. I banged it. I pressed on the sides, it was a frozen block that couldn't be broken into froze. Cubes. It was waste of money. May 31st 2026 I am updating my review to say, after many tries, I figured it out. I placed the tray laying on its back instead of up right in the freezer. The whole process is exhausting. I pressed the back to release the ice, many times, wait, do it again. Then pulled until it popped out. Shake. Shake. Shake. Shake. Shake. Shake. It worked. however the cubes are really small and do not last as long in my drink compared to medium or larger sized cubes. The concept is nice, having not to touch the cubes in transition. I'll keep it for when I entertain but rather use a ice cube tray. June1 2026 Ok...I entertained this weekend. The icebreaker Pop was a hit! I figured it out, its not so bad. I will order more in the future. Its a real space saver in the freezer.

So these are WILDLY expensive. Like, I can't fathom how much they are. But boy howdy if I don't love them. They keep the freezer burn out, they can lay or stand any which way, they're easy to fill. It's great. My only complaint (besides price) is it says they come apart for easy cleaning, but I can't for my soul figure it out, and just hurt my fingers trying. Doesn't matter. I cleaned them like I would a water bottle. If you can justify spending 20 bucks on a small ice tray (They are small, I'd want 3 or 4 personally, much ice as I use) then go for it. They're wonderful. Edit: A few small notes. First, make sure you have firmly pushed the sides back together before freezing. I'd you didn't fully pop it back in to place, when it's freezing it'll expand and you won't be able to break the solid block of ice up and will have to simply let it melt and start over. Also, I'm not sure why but I've had some leak issues from one unit. I can't seem to figure out if it's a defect or if it's just come apart a bit where it naturally separates and is leaking from that. It's irritating, but doesn't fully take away from anything. Also, know that it's no where near as simple and easy to get the cubes out as the video makes it look. Not to mention the loads of ice "crumbs." Not a deal breaker for me personally, but just feel like it's something some may wish to know. Edit: So one of the trays is definitely leaking from where it should not. I thought maybe I caused a leak trying to figure out how to open it, but the leak is from where the handle screws into the body. So it's a defect. It's not preventing it from working but I imagine it's going to shorten it's lifespan. Unfortunate. The other fine though. 6 months edit: despite the small defect causing minor leakage, all units still work great. I would highly recommend standing them upright over laying them down. When laying down they often leak from the top (I have a puddle of ice in my freezer) and I've found the ice breaks up MUCH easier from trays when they froze upright rather than sideways. Still highly recommend them.

Love these, was looking for a solution to make ice in an electric cooler where there are no flat surfaces for trays and these have worked like a charm. They don't leak, easy to fill, easy to open and get ice out. I like the size and shape of the cubes. Freezes overnight. Very pleased with this product.

Einfach klasse - tolle Funktion

Quality and appearance are poor. Price is very high

Per anni cercavo un modo per fare cubetti nonostante lo spazio nel mio freezer fosse molto limitato e non permetteva di mettere in orizzontale una vaschetta , dopo tante ricerche ho trovato l'icebreaker e ormai è un anno che lo uso ed funziona perfettamente come il primo giorno, se chiudete bene il tappo e lo riempite fino alla linea non perderà acqua nel frigo nel dubbio si può sempre mettere leggermente inclinato verso l'alto , acquisto consigliatissimo,

I like it. After just a few refills the side has split open so the water spills out. Pushed it back together and seems to be holding.

I have had this product for just under two months. It was brilliant at first, so many beautiful ice cubes! If you followed the instructions they weren’t hard to free up, it was getting them out through the hole that was fidgety, but that was only a mild inconvenience. I soon figured out that if you run it under cold water for a moment (Often you can hear the ice begin to crack then) on each side before pressing on it it helps loosen things up. I’d bring this up to my boiling loft room having used half of the ice and stored this in my mini fridge so I wouldn’t have to go all the way down for ice. It kept the ice fairly well, but I don’t know how it would fair on a picnic or if you’re out somewhere hot without a mini fridge or cooler. I previously had given this a lower rating because it came apart. Turns out I was just dumb. Obviously these are, as advertised, able to be broken down for cleaning. When you put them together again, make sure you're trying to attach the sides the correct way up.