Liftcraft - Fits 1997-2002 Wrangler TJ and 1987-1995 Jeep YJ 4WD Transfer Case Drop Kit

I have a 2000 Jeep Wrangler 4.0. Installed a 2.5" lift from rough country . Head a crazy vibration coming from rear drive shaft . Changed rear u joints helped Little bit , But you can still feel the vibration from 15to40mph. Install the 1 inch transfer case drop . No vibration whatsoever in any speed . I see some people complain about the bolts not matching . I did not have that problem . In my case I live in Midwest and knowing jeeps they rust . The nut that's welded on the frame holds t-case skit plate spins and brakes off . This is where peopel run in to problems because some one tried fixing it and did not know what to do and installed incorrect bolt/nut. The original boot is 1/2"-13 Coarse. The bolts that came in the kit did not work for me . Because they were to short do to the nut brakeing off (rusty fream) . The previous owner did a correct repair by installing longer bolts and drilling a hole on top of the fream and installing a nut on top. I think they are 9" bolts . Hope this information will help you .

If your lifted over 3" and don't want to spend a lot of money this will correct your driveline angles. I highly recommend this kit .

Perfect fitment on my 97 Wrangler, solved my issue with the vibration, but would recommend that with this addition you add the linkage drop kit for the 4WD

Washers this came with are on the cheap,thin side . Spacers dont sit level and square due to OEM being counter sunken. Other than than ok for the $ spent

Work as it should

Worked perfect

The bolts that came with my purchase are fatter than the original bolts and it stripped the hole, I had to re-thread the hole and go up another size bolt. Took a 30 minute job into a 3 hour job...

Should have listened to the reviews. Bolts are wrong size, even though it says for my year Jeep. Thankfully I checked that before doing too much work.