BUCKLOS Mountain Bike Crankset Single Speed Square Taper MTB Crank 170mm

Changed my Motobecane mountain bike from a 3x to 1x, very easy, saved weight and reduced complication. I did need to pick up a crank puller, but this product bolted right up and required very little rear derailleur adjustment for proper function.

I haven't ridden the bike on any trails yet but the crank chainring is smooth. No skips in the chain when pedaling. The bike overall looks cleaner with out the front derailleur and multi chainring crankset that were on it.

For a chainring/crankset combo that had the branding of "SNAIL" on the chainring, I didn't have huge expectations. But I've used the 32t red chainring with the cranks for a year on my townie commuter with a 7-speed rear and it's worked great. Less chain drops than the previous single front chainring which was presumably the stock Electra. The townie stretched frame requires a super long chain, if you have a similar cruiser it worked fine with this setup with a SRAM 7-speed chain. Wear seems normal and the install was simple on square taper bottom bracket.Seriously, the chainring says "SNAIL" right on it, how can you go wrong? The weird branding and the price were what sold me when I was browsing for it.

The set is great for the money however the aluminum cranks could use more strength. They have held up well so far, but I am concerned about the pedal threads and tapered hole over time as they show signs of wear.

Complete garbage product. The teeth on the ring are too small and are constantly skipping off. I do not recommend this product in any way shape or form, amend the extra 15-20 and get something that will function properly.

Nice crankset with chainring. I have not seen anyone state the bottom bracket spindle length needed for this yet. The bike I installed this on had a bottom bracket with a 112mm spindle. This was too long( see chainline in picture #1). I had to put the chainring on the inside of the crank to get the chainline correct (see pic #2). I would guess the correct spindle length would be around 107 mm or so. Using with a 10speed chain. Everything is running smooth, will update if crud hits the fan.

My Mt. Bike is 5yrs old and needed some over due maintenance and made pretty.Everything arrived in a timely manner and undamaged, as does all of their items.They had most of what I needed for upgrades (everything a magnet stuck to had to go) along with pedals and the up grade to 203mm rotors (don't stop here, check out the whole store)I'm probably going to them for my front shock and head set in December.

I like the quality and feel of it

a little lighter than the stock crankset on my cheap fat bike. they look nice. would have been nice if they came with crank bolts though. they went on nice and tightened to 40nm no problem. chain ring seems of good quality and fit the chain nice. one thing to note: the BB shaft is a different length on either side(non cartage BB). chain line was way out when i installed it... simply by turning the BB axle the opposite way corrected it. if you have a non cartridge BB it works. obviously if you have a sealed BB(cartridge) this doesn't work.

Muy buen producto en relación calidad y precio, la instalación es fácil, se recomienda el uso del extractor para que sea mas rápido el intercambió, la resistencia del plato es buena, para mi gusto le agregué una guía para evitar que se bote la cadena.

Fits and works well, good product

Easy to install and good quality