Kensington Keyboard Tray Under Desk, SmartFit Ergonomic Slide-Out Keyboard Drawer with Cable Management, Extra-Wide Height Adjustable Keyboard Holder, 24.5" x 11.75", Black K60004US

The design is simple and installation is easy to customize. My “desk” is actually a table that has a storage area underneath, so I couldn’t just screw into the particle board and trust that. So I bought some bolts and wing nuts, drilled through the bottom of the table and added some wide washers for extra stability. The wing nuts will allow me to remove the tray easily if I ever need to use this as a table again. The brackets also needed to be reversed to fit the width of my table and it worked just fine. I’ve bought other trays before that were a pain to put together but this was really easy. It took about 30 minutes to install.I like that the tray doesn’t slide in and out too freely, so it doesn’t try to slide back in as I’m typing. It’s wide enough for a full keyboard and mouse. It comes with a wrist rest and some foam I assume is for a mousepad, but I just use my own mousepad. I would buy this again if I ever need a second one.

I don't usually write reviews, but this is a good product that I couldn't easily find. Other under desk mount types are very clunky and poorly made. The clamp style doesn't work for our desk set up.This is a sturdy under desk mount keyboard drawer that requires a #2 Phillips head screwdriver and either get self-tapping screws or a 1/8" drill bit to pre-drill holes using the supplied screws. It took me 30 minutes on desk 1, as needed to learn how to set the spacing. It took about 15 minutes on the second desk. If you have a screw gun and can drill a hole you can easily do this.We looked for weeks at multiple keyboards, all looked pretty bad. This Kensington model is well built, but not suitable for abuse/heavy use. We had the old Rubbermaid one similar one was discontinued; others looking similar are likely as flimsy as the old Rubbermaid model.This drawer slides even and smoothly with a soft "lock" when you push it in so it doesn't roll out. It looks good if you like black.

This product was purchased twice. First package did not come with the 4 screws that were required for the first step. They sent me a new one with no issues and it contained all of the parts. I returned the original, it has been a week and no refund yet (will update if complications arise).I have an L-Desk with a metal bar that lines the edges, this prevents the bottom of my desk to be flush. The brackets on this keyboard trays does accommodate that difference. I did have to switch out my keyboard for a more standard one to best fit the tray and still maintain an upright angle.Installation was tricky because there was no situation where I could flip my desk upside-down. I assembled the tray fully, aligned it where I needed it to my desk and used a bungee cord to hold it in place. The screws for the bracket to desk are too long, I replaced those wood screws and also pre-drilled my holes because, my desk isn't real wood. There are a lot of videos and information out there installing these styles, a little research helps to make it really customizable.All in all, it all came together well enough. Some adjusting to it is needed but it's nice to have more distance from my screen and hold a more relaxed position to type. My mouse does fit on the tray but not enough space to really do any graphic design or modeling work.The "con's" I could claim are 1- due to installation, I am not 100% on the alignment and my tracks might be a tad off causing some friction. Not end of world stuff, just a bit of resistance. At least my tray doesn't have any ability to slam into position. 2- I sit weird, so my legs are actually pressed up against the bottom of the tray. The bottom of the tray, manufacturing wise to cut down on weight and material was to hollow it out and make it waffle construction. Now I have thin edges of plastic digging into my legs. Don't be me and you'll be fine. I have also ordered a new chair due to how I sit.... 3- durability, I am uncertain how strong the plastic honestly is. There is some give, the foam bumper slips and slides around. The plastic tray does flex, I don't believe my hands/arms have enough weight to break it?

Firstly I thought of getting a clamp type tray which I later confirmed would get in the way when I move things around on the desk. At least it wasn’t for me. There was another type of product in the same price range. It had smaller width, but had a separate mouse pad base linked to it, which didn’t seem to be solid enough.I finally chose this one mostly because of the extra-wide inner drawer space (24.5”) which I knew would give me a lot more room to maneuver my keyboard and mouse within a single drawer space, thus giving me more position tolerance. At first look, I wasn’t sure if the rails and brackets were solid enough, but I trusted one of the other reviewers who said it was. The brackets and rails are solid and sturdy and it shouldn’t be a concern, unless you would mean to abuse it. I’m very satisfied with the product and I’m happy that I went with this one. Now my hands nicely hang and rest when I type or use mouse, giving no more strain to my wrists or elbows.Unless you have a desk you can flip over easily for the installation, some measuring, simulation on the optimum installation position, and actual installation under your desk could take some time. Price was right and I would select the same product if I had to do it again. BTW, wrist rest pad and mouse pad came along with the tray which was great. The mouse pad could be better, so I threw in my old mouse pad in there as well. The wrist rest pad, however, is great and no complaint.

My main problem with this keyboard is the beveled front edge. If your keyboard is not as high as the edge (I use an apple keyboard), your wrist will press against it. A gel pad is provided, seemingly to remedy this issue. However, gel pads are actually not ergonomic, as your wrists should be totally free of contact from any surface. I have cubital tunnel syndrome, so this is a very big problem for me. I need to put a book or pad under my keyboard, which is frustrating because the whole point of this purchase was to move away from the ad hoc quarantine home office set up I had before.Also, the instructions have limited explanations and were confusing. They provide 3-holed brackets, which are screwed to a section of the sliding rail with 2 pilot holes. Any 2 of the 3 holes on the brackets do not line up with the 2 pilot holes, and apparently this is because you only use one screw. A few words explaining this is the graphic instructions would be useful.Finally, the instructions include a very strange hand sizing guide that allegedly helps you select the correct height for your keyboard. Like I said, I have cubital tunnel, so I have read a lot about the most ergonomic keyboard set up. I have never seen anything suggesting the size of your hand should dictate the height of your keyboard. If there is any correlation between hand size and keyboard height, it is the reverse of what their instructions suggest. People with smaller hands are probably shorter than those with large hands, so they need a keyboard that is lower to the ground as opposed to higher.All that being said, this product will serve me relatively well if I can work around the beveled edge. I am 5'3", and need my keyboard to be only 24" off the ground. I attached this to a 28" high desk and set the keyboard height at 4", so that'll work fine for me. It feels sturdy, glides smoothly, and is spacious.

This is a good product for the price. It's lightweight but feels stable and is very easy to install - just set the height of the shelf and secure it to the underside of your desk with 8 screws. A few things to note, though:1) I didn't measure my keyboard and mousepad beforehand, so the shelf wasn't as wide as I expected. If you have a full-size (104- or 108-key) keyboard, you most likely will not have room for a full-size mousepad on the tray, hence the mini-mousepad provided. If you're a gamer and need a standard or oversized mousepad or gaming mat and also have a full-sized keyboard, definitely buy a wider tray.2) The supplied mousepad is very flimsy and thin. Luckily, it's removable, and mousepads are cheap. The wrist rest is actually decent, but can also be removed or replaced.3) The 8 screws provided are ok, but if you want a more secure hold, I'd highly recommend using wood screws to attach the tray to your desk. Depending on what your desk is made of, you may want to drill lead holes beforehand.Also, while it's possible to install this alone, it helps to have a second person hold the tray in place while you're making marks for screw holes and screwing it in.

Works fine, but the tray doesn’t pull out or push in smoothly. Installation was extremely frustrating. A template would have cut the installation time by 75% or more. I couldn’t flip my desk upside down, so having a paper template was absolutely needed. Mine ended up at a bit of an angle, but by the time it was at the point that the angle was noticeable, I was absolutely not willing to start over.It does its job, so I’m still going to give it 5 stars.

Great solution to retrofit an older desk and installation is very easy. My only reason for four versus five stars is pricing.

Bought this to attach to my DIY desk which is 2 1x2 cubes with a timber top across them. The pull out keyboard tray is perfect. Gives me the space I need without my desk being crowded. Easy to install. Great value.

Lo escogí porque es el más grande que pude encontrar y tenía buenas reseñas. Tengo un teclado ergonómico que ocupa mucho espacio y un mouse vertical. El espacio en la charola fue suficiente para que cupieran mi mouse y mi teclado, aunque eso solamente a lo ancho. En cuanto a lo alto, a pesar de haber colocado la charola lo más despegado del escritorio posible (aproximadamente 8 cm) mi mouse es demasiado alto para caber debajo del escritorio, pero como la charola se mete y se saca, de todas maneras me sirve. Eso de la altura ajustable es cierto pero no se ajusta con facilidad, básicamente si se quiere cambiar la altura hay que desatornillar la charola del escritorio y volverla a colocar, lo cual no es muy práctico. No obstante, creo que fue una buena compra. Eso sí, el tapete del mouse y el reposamuñecas que vienen incluidos no son de la mejor calidad, pero en cuanto a la charola en sí es bastante maciza y puedo recargar el peso de mis brazos en la ella sin problemas, aunque por lo general también me apoyo de los reposabrazos de mi silla. En resumen, estoy satisfecha con la compra.

Good product its worth the price.

ممتازة، وسهلة التركيب.

Kensington is a descent product and for the price it is a GREAT deal. The quality is fairly good and easy to install. Will hold up for many years to come Im sure! I am a BIG guy with BIG hands and the keyboard drawer easily holds my arm weight when slightly leaning on it when engaging with the mouse. It was also a pleasant surprise to see it came with a wrist pad and a small mouse pad included! I highly recommend this product if you are looking for a great deal for a descent keyboard/mouse drawer