Household Essentials White Two-Tier Organizer | Mounts to Solid Cabinet Doors or Wall

I purchased two of these, since I was excited to be able to place them onto my small cabinet doors under my sink. The Measurements lined up, height and width. The issue I ran into, when trying to install them, is that the places where the screws were to go, were on the thin part of the doors, not the outside, thicker parts. If I would have placed a screw in the holes intended to hang the shelves, it would have made it straight through the front of the door panel. Not an issue with the product, but maybe something to be aware of. I have since placed these on screws, that barely catch the edge of the shelves, to be able to hang them, instead of returning them... They are, due to this, super wobbly though. I cannot remember if there was a screw-to-screw measurement, if there was not, it would be good to have that, to avoid these issues. Again, not a product issue, but it caused me to not be able to hang the shelves as I had hoped. I even tried super gluing them, but that did not work either.

Great organizer for my kitchen. Saves steps while cleaning up, a place for everything. It’s a good, sturdy rack for your wraps.

My husband easily installed this. It is holding up well. I store a heavy box of knives it.

If your cabinet doors are like mine, you have a solid wood frame, but the door inset is of a much thinner wood. If you try to put screws in that they will pop out the other side. So you have to mount on the frame. The problem is that will cause it to hit the cabinet when you close the door, so the door won't close.So I bought this one because the screws looked very close to the top of the rack. When I determined they still would not allow the door to close, I used a pair of wire cutters to cut the very top off of it. That made it short enough to mount on the frame and still close. Wife happy to have it and get the clutter of the counter top. So all good!

Was hoping this would work but alas I was wrong.

Used these as toilet paper holders. Installed 8 of these in the stalls at work. Worked perfectly.

I do like this, but it's a little nosy each time you close the cabinet, You hear the clang of the metal against the cabinet door and it can be irritating.

Use two of them in my shop for shop towels. Adequate for that use.

So I bought this a a guinea pig DIY hayhack that they couldn't eat through. I used the provided screws to mount a piece of wood on the back and then hung it off the side of the cage. Works great. Allows the guineas to pull out hay, but not the whole pile, which they would then like to make a mess on and demand more hay.Have to fill it once or twice a day, but saves me a lot of money on hay!

Cet article fut judicieusement placé dans l’armoire sous l’evier de la cuisine, intégrée a même l’ilôt centrale.Son installation fut quelque peu rocambolesque, parchemé d’embûches et de défis. Géométriquement parlant, il faut comprendre que les trous de vis servant à immobiliser l’article sont difficile d’accès. Il aurait fallu un long tournevis étroit pour les atteindre.Ne fus-je débrouillard et équipé de toute sorte d’outils, je n’aurais pu l’installer...A s’en méfier, ou à s’en défier, c’est selon.

These are great if you want more cabinet storage on the doors but have built in shelves. I thought I wanted the ones that just hang on the cabinet door but quickly realized that wasn't going to work. These are nice because you can screw them to the cabinet door wherever you like and avoid bumping into existing shelves

Liked the storage purpose. The material is solid. But I was kind of misled by the measurement. Thinking the mounting would be at 13 inches. The mounting was inside the 13 inch range which hit the thin part of my cupboard door. So we improvised. double sided tape didn’t work so we used those little plastic tap in things to hold cords around framework so they don’t sit on the floor. It was very difficult to work between the wiring and ended up splitting the side panel of the door

I had been searching for a vertical cabinet-mounted paper towel rack for a long time. I did not want an adhesive one and space constraints made it such that I could not get an under-the-cabinet model. I was happy to find a metal one for such a low price. It takes up no space that would normally be used.I have a standard 70s-80s melamine laminate with oak trim set of cabinets in my kitchen. They are not very high-quality and the sides are thin. However, the short screws this comes with were able to secure the holder without going through or damaging the side of my cabinet.