Thermal Grizzly Conductonaut - 1 Gram - High Performance Liquid Metal Compound Thermal Paste for Superior CPU/GPU/Console Cooling - Made in Germany

I did an upgrade to a new CPU of a very old laptop (10+ years) to get some life out of it. The new CPU is a Core 2 Duo. That's how old this thing is. After using the thermal paste that came with the CPU I turned on the computer and had the fan going on medium or high most of the time. I decided that the laptop would be unusable with that level of noise, so I got Conductonaut to try it out before doing it on my big and expensive PC. The result was incredible. The laptop fan now works on low if at all and the CPU stays at or below 60C, even under load. In short, this is great for laptops for the noise reduction. I guess it will be just as good on a GPU, which I'll try next. If you do try this stuff, do watch the videos and be extremely careful when putting it on the chip. I covered both the chip and the heat sink with a thin and even layer by putting first a small bead on and then using the swab to spread it. You have to press the bead with the swab firmly at first to get it to start bonding to the substrate. If you don't, it'll just roll around dangerously. This isn't really a paste. The consistency is more like water, so be very careful and use only enough to get an even shiny film, but not more. If you have to lift the heat sink off to adjust something, it's possible. Just respread with the swab to get the metal spread out evenly again. If you didn't use too much, you will find that it doesn't squeeze out much excess even after bolting down the heat sink. Love this stuff. I wish I knew about how important thermal compound was long ago.

This is the best thermal paste ever, my laptop is an asus rog gl502vsk, cpu temp hovering around 90 to 95°c full load, now it drop the temp to maximum 72°c full load after applying this thing, just be very careful when applying it, its very thermal conductive

Well I’m using in my Clevo DTR delid 8700K and its do the goods job to lower the temperature. Recommended. But you need to be careful while applying.

Excellent

Replaced the old Liquid Metal from an Asus laptop. 10 degrees temperature drop.

Amazing product. I got 20° lower on my Alienware M15 laptop. Definitely recommended. Product was original also.

Just as expected 👍🏼

Its good for short testing. But in the long term it bonds with the copper metal and you have resand everytime. Its not safe and time consuming to apply. Recommend thermalright TFX thats the nearest thing to a liquid metal