Sabrent NVMe M.2 SSD to PCIe X16/X8/X4 Card with aluminum heat sink (EC-PCIE)

Works well in my old HP Z440 workstation and i used it with Kingston 1TB NVMe storage. The speed was 3000 MB which is very good for an old workstation. The person who i do maintenance to my pc could make it as a C- drive and installed windows on it normally.

منتج ممتاز و سريع في نقل و سهل فك و تركيب فقط كبسة زر انصح به

Great product with amazing performance. I am super happy! And you know what, after some research in internet, it started to work on my Optiplex 990! I know that u won’t believe it. Of course with some bios change; but it did work.

Easy and good product plug and play

Amazing Performance and Build Quality Heatsink option is very good. Helps keep the temperature of the SSD low

with Samsung NVMe the speed exceeded 2500

very good

Worked for 1 month then just stopped working and shows firmware issue

Apreciei a qualidade do produto, aliás consultei o site do fabricante... Fácil de instalar, não causará danos ao Pciex. Sim, barramento é X4, rodando com SSD Crucial M.2 P3 500MB. [obs. Pciex Asus sabertooth 990FX é 2.0, conforme foto, velocidade de leitura e gravação foi a máxima adquirida para este Pciex 2.0... SSD é para Pciex 3.0.] RECOMENDO o produto e vendedor, produto chegou antes do prazo estipulado pelo Amazon. Obs. Para este modelo de Main board, afim de fazer boot Windows 10, tive que atualizar para a última versão de BIOS afim de ser detectável SSD M.2 NVME, então é obrigatório consultar compatibilidade de funcionamento da Main board para com este periférico SSD M.2 NVME.

I'm using two of these with 2230 size SSDs. The second piece of the two piece aluminum clamshell does not have a relief drilled into to clear the SSD mounting screw, but since the SSD is so short, and the thermal pads are just the right thickness, friction alone holds the SSD firmly in place, no screw needed. Using other size SSDs, the screw will clear the aluminum plate. Inexpensive, easy to use option. Rather than figuring out birufication and all that, just get a couple of these if you have some free slots. From what I can tell, the performance is totally dependent on the SSD you're using, so you get what you pay for there. I didn't do anything to test how hot it gets, but thermals are handled by my workstation pretty well so I don't anticipate any issue; the heat spreader used on these SSDs inside a laptop is MUCH smaller and they never overheat, so I would imagine you could run the SSD at 100% for days and it would be fine, since there's so much aluminum attached to it. Better than adapting to SATA. Easy peasy.

Nice Product.easy to install and it's a nice Technology for old motherboard.Upgraded Pc without Invest lots more money at all.Problem Shortout with it.Thanks to Seller.

Werkt perfect en precies zoals omschreven voor mijn 1Tb Samsung EVO 970 Nvme SSD, in combinatie met een Gigabyte X99 moederbord. Read speed 3535 Mb/s en write 3050 Mb/s. Voor de bijgeleverde blauwe koelstrips wordt in de manual niet toegelicht hoe ze gebruikt kunnen worden. Ik heb 1 dikkere strip onder de SSD geplaatst en 1 dunnere variant bovenop de SSD. Er zijn Youtube videos installatie videos te vinden, zoals deze: https://www.youtube.com/watch?v=vB87WNisVJA.

12/11/2025 monté sur un hp proliant microserver gen7 N40L sur le port pcie 16x2 et reconnu par un système debian 13 sans problème. la vitesse avec hdparm -tT est de +-1700MB/sec (cached) et 852MB/sec (buffered). l'adaptateur est couplé à un ssd (netac) NVMe 250 Go (PCIe 3.0, 3D NAND, NVMe, M.2 Gaming SSD) jusqu'à 3000 Mo/s pour PC NAS. sur le ssd une database postgres de plus de 150GO répond parfaitement. rien à dire pour le moment, il faudra voir avec le temps ...