QualGear Qg-TM-022-Blk Articulating TV Wall Mount /15-27, Black, 13-27-Inch

I purchased this large TV mount and it met my expectations. The build is solid and it holds the TV securely without any wobbling or shifting. Strong, durable materials - Easy-to-follow instructions for installation - Adjustable tilt and swivel options Sleek design that sits close to the wall A great value for a sturdy, reliable mount. It keeps the TV secure and looks clean in the room.

My review is for the smallest, 13"-27" mount. Due to the location of the HDMI port on my TV I needed a smaller VESA plate than most mounts have. This mount did the trick, and is nice quality for a great price, too! It comes with a complete set of bolts for mounting to practically any kind of wall you can imagine and also includes a template for positioning the bolts, which is a nice touch. Now for the negative: Installing the lag bolts into the wall stud was not as easy as it could have been. When it came to time to install them, I happily grabbed my impact driver and was just about to drive those bad boys in when I noticed a little warning box in the instructions: no power tools allowed! What?! These were no dinky little screws, these were beefy lags, so what gives? Not wanting to risk the hassle of dealing with broken bolts, I went ahead and busted out the socket set instead. Which was a little more challenging to keep straight while getting started, but worked fine. Until I collided with the bottom wall hinge. It aaaaaalmost cleared, but not quite. No matter how I tried, the hex head of the lag bolt just barely hit the bottom of the hinge and could go no farther. Had to loosen the hinge bolt until the bottom nut was out of the way, finish driving the lag, then tighten it back up. Not a huge deal and didn't affect the performance of the mount, but should probably be mentioned in the manual. Didn't have the problem on the top, where the hole for the lag bolt hole is farther away from the hinge. Other than that hiccup, and the fact that our lathe and plaster walls are almost impossible to locate studs in, the install went quick and easy and the mount works great!

This TV mount is very good. We enjoy a more clean and minimalist house. For this reason we were looking for very slim TV mounts. This TV wall mount is great, because of price, strength, thickness and easy to install process. Two monta ago I installed it first in our master bedroom to mount a 65” TV. And last week I got another TV mount to hang a 43” TV in the guest bedroom. Works perfectly, no problems at all. Both are installed in aluminum studs.

The QualGear QG-TM-002-BLK Wall Mount is a solid and ultra-slim option for mounting 37” to 70” TVs securely. I installed this on my living room wall, and it holds my TV perfectly flush with a low-profile design that looks sleek and modern. The installation process was straightforward, with clear instructions and included hardware for different TV models. The heavy-duty steel construction feels sturdy and durable, giving me confidence that my TV is secure. Once mounted, the TV sits just 1 inch from the wall, making it look clean and professional. One small thing to note: This is a fixed mount, so if you need tilting or swiveling, you might want a different model. But if you’re looking for a simple, no-gap mounting solution, this one is perfect. And here’s a quick joke: Why did the TV love its wall mount? Because it always kept things steady in the relationship! Overall, the QualGear QG-TM-002-BLK is a sturdy, low-profile, and reliable wall mount for large TVs. It’s easy to install, holds securely, and gives a sleek, modern look to any entertainment setup.

Like most people who spend a fortune on a new big screen TV, I was leery of hanging it off the wall, going to bed, and hearing it fall to the floor at 3AM. But, i wanted it on the wall, and not on a piece of furniture. I just purchased a 50" Samsung, and wanted something that was gonna hold my TV without any chance of it coming down. I don't like the wall mounts that move in every direction and aren't really any where near flush to the wall. This wall mount was what i was looking for, low profile, close to the wall without a metal contraption behind the TV. When it arrived I was surprised at the quality of the parts. Although some are plastic, the important parts are metal, and it came with every screw and bolt i needed to install the mount, including the bolts needed to attach it to the TV (I've bought several mounts in the past for other TV's in my home, and none came with the TV bolts required to attach it to the mount). The one thing that threw me was the VESA sizing, and which sizes could be used for specific applications (attaching mount to concrete, brick, drywall, etc). I wanted to use this mount for drywall (I'm assuming like most people), the VESA size of my Samsung is 200 x 200. The description states it will work for my TV. It does, but not for drywall. The anchors for the mount that the cable straps over are required to be attached to studs in the wall, which are normally 16" on center, making the anchors much further apart than the mounting holes on my TV. I am extremely hesitant to use butterfly screws or drywall anchors, i just don't think they will hold a 32lb TV over time, not that this was suggested in the installing procedure. I did adjust the cable wire to work so it was going over the anchors that are bolted into 2x4 studs, 16" on center. Overall, this is a great wall mount, especially at the price its selling at. Definitely will by again for bedroom TV's now that I know exactly what I'm getting.

This is my third time installing a TV mount to the wall. This particular mount is probably the easiest one I've had to deal with and I say that even though I had to drill through concrete to get the mounting screws into the wall. There wasn't much assembling in regards to the TV mount. You just unbolt the mounting plate from the rest of the TV mount. Attach the mounting plate to the TV which in our case was a 32 inch Toshiba LED TV. And you measure where you want the TV mount to go on the wall, you drill and then install the TV mount. Then you attach the TV to the mount. It was a breeze in my opinion. And whether you install this TV mount into studs or into a concrete wall, the kit comes with all the necessary mounting equipment. You'll just of course need the appropriate tools such as a drill, screwdriver,etc... Overall, aside from the easy installation this is a great TV mount. Its sturdy, can extend a good distance from the wall, and there's plenty of available adjustments so you get your desired viewing angle. Overall, I'm very happy with this product considering how inexpensive it was. Overall, I really like this TV mount. Aside from the installation being a breeze

After reading MANY reviews and looking at three similar products each double to triple the price, I decided to go with this for my new Panasonic 65" mini-led TV. I wanted it flat on the wall, with no need to position or rotate/tilt. This offered the closest application to the wall .4/.5" - I'm happy to report it worked perfectly. Now, you can flex the bar with your two hands OFF the wall, but secured to the wall it's more than strong enough to hold the properly sized/weighted tv. Don't be afraid. Had every part necessary imaginable included with multiple screw sizes. I was fortunate my application hit TWO STUDS so I'm very confident of its installation. DO pre-drill out the screw-holes at LEAST 3" inches deep as the thick lag screws are a BEAR to screw into the studs easily. My only mistake was not having a metric Socket wrench to make their tightening easier. You WILL STRIP the screws with a Phillips screwdriver and practically strip your hand in the process. PLEASE do yourself a favor and have the appropriate size socket wrench/head available and you'll be fine. I used four lag screws into the studs and it felt very secure. I would suggest if you don't hit two studs to increase your four screws to SIX if you are using in drywall applications. I think adding the additional screws will stabilize the wall plate. Do yourself a favor and loop a LONG string between the pull-downs that clip the bottom of the holder into place AFTER handing the tv. it will be IMPOSSIBLE to try to grab them once on the wall .. impossible. Pull down and click into place and then you can cut the string and remove it so it's not visible or tuck it up behind for future use. I'm a thoroughly impressed by the relative ease, contents and SLIM attachment to the wall. I'd buy this again and look no further.

Since my 50" flat screen has not arrived yet, this review will have to be provisional. I have mounted the bracket on the wall — a fairly basic procedure, but you will need an electric drill or the equivalent and a socket wrench (10mm). I mounted the wall bracket a little differently than the instructions recommend. I first drilled the top hole at the correct height (center hole at 3' for me), mounted and leveled the bracket, drilled the bottom hole (it allows for some adjustment) and only drilled the middle hole (2) after 1 and 3 were tight and the bracket was perpendicular. It helps to remove the cord covers before doing this. Look at the pictures in the instruction booklet before assembling the arms on the TV bracket. It's not immediately obvious how the bracket and arms screw together at first glance. The booklet is certainly adequate for the job at hand. I like the way all the small parts were organized and packaged in individual pockets, mostly all linked together. A simple wrench and a small level are included leaving me to provide the drill, socket wrench and a #2 Phillips screwdriver. (The package also comes with an Allen wrench if you need it.) You will not need all the parts included for all the different installations, so don't get confused. I give this unit five stars for its practicality and price. The finish is good and perfectly adequate. Remember, it is all hidden behind the TV. Once you have your TV mounted and adjusted, you will probably just forget it's there (except maybe to vacuum it occasionally). Now if the bracket just fits on the back of my new TV, I'm home free. The promo material says it will, but I haven't seen the back of the TV yet. Don't hesitate before buying this unit.