Instant Smile The Disk Denture Reliner | Relines Loose Fitting Dentures for Better Fit. Moulds and Softens in Hot Water. Non-Permanent and Removable.

So first of all, this solidifies as a hard reline. Second, I am using this in my top partial only. If you are relining whole dentures, you will need two of these, one for top and one for bottom. The dentist had to remove my tooth that held my top partial in so I do not have a tooth to hold my denture bracket in. Third I have tried several different reline kits and so far this is my favorite. I will also add I found the best fake tooth kit as well to create a tooth on the bracket that is missing a tooth. Temp Tooth is amazing and because they give you so many beads and the tooth lasts months before it discolors, the kit has lasted me a year. But I digress, back to the reline kit. I put the whole thing in microwaved hot water until it melted and was pliable. Placed it in partial so that it was thicker in the places I needed (the left side missing the tooth) and thinner on the right. When still soft I put the denture in, got it in place and held it there for several minutes. I removed it and trimmed the excess which is the hard part. It was difficult to trim while it was still soft, easier once it hardened, but left rough spots. Once trimmed, I put the rough denture areas back into the hot water and smoothed the edges. It fits wonderfully and it’s reusable. The soft liners would thin over time until they no longer worked and wouldn’t stay connected to the denture requiring adhesive which was just a mess. Hopefully in the long term, this won’t do that, but if it does I will just pop it out and reheat it an make it all over again.

Definitely, do not waste your money on this piece of junk product.It does not do what it says it's supposed to do. Not worth the money, not worth the time.And energy to do this do not recommend that all

Wow what a great product for relining your dentures. This is by far the easiest and most foolproof way to reline. I found it best to boil some water or you could use your coffeemaker to make a cupful of hot water. Then I dropped the disc into it for a minute or so and it softened it really well. I then removed it with a spoon and placed it on my denture and worked it in with my fingers. Then drop it back in the water to soften it some more and put it in your mouth but be careful it's not too hot. Once in there you should bite down or use your fingers to push it against your gums to mold it to the shape of your mouth. After 1 or 2 minutes in there you can remove it and rinse. The great thing about this is if your not happy with the outcome just drop your denture back in hot water and try again. You can do this as many times as you like to achieve the perfect result. After it hardens and you're satisfied with the result trim any excess from around the edges with a hobby knife or razor blade. This material hardens completely and feels just like your original denture. You can clean it easily and soak it overnight and the reliner will not be affected.

I have been using this better part of a year. I boil water because hot water didn't soften enough to mold. It has been working great, until the last three that I received wouldn't soften. I boiled water twice and still wouldn't soften enough to mold. I am not going to try this product again because I am already out $30. On a fixed income in this economy you just can't afford to roll the dice and hope for a good one.

This reliner is good if you need a quick and cheap fix for loose dentures. It can improve comfort and fit, but it’s not perfect and won’t replace a professional dental reliner. What’s good - It helps dentures feel tighter and more secure. Easy to use once you understand the steps. Can be reheated and reshaped if you make a mistake. Affordable compared to dentist reliner. No denture glue needed. What’s not good - Can feel hard or uncomfortable if not molded right. Takes a little trial and error. Not a permanent solution. It doesn’t last very long.

Loved everything about this product. I had not been able to wear my immediate dentures 3 months until I discovered this product. The soft reline didn't provide suction. Adhesives wouldn't stick to the soft reline. So I peeled that out and used this disc to fill the gaps between my actual gums and mouth shape to these dentures that were made before my teeth were pulled out. And didn't seem to resemble any of landscape of my mouth. I trimmed them down to fit my denture. Put the wafer on top of the denture in a cup of hot water. Pushed it into the gums. Took it out. And when it cooled I put them in and clenched down hard and waited and I took them out to let them further set up harden. I used to razor blade to trim down the excess that was going over the top of the dentures. And they have worked fine for a month now. And I use a very strong glue called "secure adhesive" . After a month of using this adhesive it eventually started to pull the plastic lining out. I just poured boiling hot water on it. Let it cool. Put it back in my mouth and clenched. And it reset just fine.

It didn't work I would still need glue to hold my denture in, it wasn't work it

Instant smile disk are a life saver! They’re easy to use and fairly priced.

Fast & easy to use. I recommend removing any globs of overflow on the outside of your denture before it completely dries as it sets pretty hard. Saves having to reheat. The post from the US was surprisingly quick.

Je suis très satisfait et je le recommande super

This stuff is amazing , after carefully taking it out of the package, it was a little stuck from heat i presume but a little hot water did wonders . i put it on my dentals and now it fits perfectly !! it hardens normal and if it doesnt fit the first time you can reheat it and try again ! really amazing stuff and i would recommend

Pessimo prodotto.....!!!! Non funziona in nessuna maniera.😡 Soldi buttati al vento.

Trop bien je revis!!!après maintes visite chez le dentiste je ne pouvais pas porter ma prothèse trop douloureux et la nickel!! Je la passe sous l eau chaude j enlève la pâte que je met dans un bol avec de l eau chaude et je la retravaille aisément ça ne fond pas avec les boissons chaudes contraiment aux avis que j ai lus pour moi c est le truc idéal j ai essayé d autres pâtes qui tenaient que quelques jours et qui restaient molles donc ça bougeait la ça tient je revis tout simplement sans douleurs et en pouvant manger correctement