Swpeet Assorted 24 Pcs Toggle Bolt and Wing Nut for Hanging Heavy Items on Drywall - 1/8 Inch, 3/16Inch, 1/4Inch

Easy installation.

Great to have, they are a blessing ...

I have seen some reviews mentioning missing parts in the box -- which would be very annoying -- but that was not the case for me. For my floating Ikea shelf that was pulled out the wall by my husband leaning on it heavily, I had to fix this shelf as it already had a ripped-out chunk of drywall. Product itself is great! No screw was stripped during the process, it felt solid. Yes, these need metal washers. Not the plastic washers that go inside the wall, but metal circular washers to prevent the screw from pulling through the shelf or bracket. ** it would have been nice if metal washers for the screw head sizes were provided within the package, which would have made this a solid 5-star. Points of caution during installation -- this part is critical! 1) First, prepare all your holes before attaching the item you’re hanging to the wall. 2) The hole must be large enough to slide in the folded toggle. Do not hammer or force it in. Keep adjusting the hole size until the toggle passes through snugly. 3) Before you attach your piece, assemble everything. Put the washer on the screw, pass the screw through your floating shelf (or whatever you are hanging), then thread the toggle onto the end that goes into the wall. Pay close attention to the direction of the toggle so it opens correctly inside the wall and holds properly. 4) This step is very important. Do not use an electric drill. Use a hand screwdriver for better control. If the screw spins loosely inside the wall, the toggle can unscrew itself and fall inside. While tightening, pull the screw toward you so the toggle stays pressed against the inside of the wall. You will know it’s working when the shelf or bracket steadily pulls closer to the wall. Regarding drill size: this may sound off, but the screw size versus drill size isn’t what matters. The hole size depends on the toggle size: For the 3/16 Toggle Screw, I used 1/2" Auger bit. That is what I had in hand. If you have 1/2" drill bit, go ahead and use that but the auger bit gave a nice clean hole. Yes, I would recommend this product and the material is not flimsy.

Sistema tradizionale ma sempre efficace

Très bon produit