Ring Video Wired Doorbell (newest model), Home or business security, Two-Way Talk, advanced motion detection, HD camera and real-time alerts to monitor your front door (wiring required)

This is my review for: Ring Video Doorbell Wired I tried to keep my review short but there was a lot of information here so I added headers for easier reading. Background: When the first Ring doorbell came out, I really wanted one, but it was a bit too expensive for my taste, so I went with a cheap knock-off. I have been using that knock-off since then and I hate it. The image quality wasn’t awful, but it had a lot of bugs and it didn’t play well with “Alexa”. I kept automating my home adding echo’s, lights, switches, cameras, you name it and every time I circled back to the doorbell I would think: “I already have a video doorbell and the Ring doorbell is still pricey; maybe I should buy some other automation toys”. Well, this new Ring came out, and it was less than 100$ thus I said, let’s try it… Appearance: Dimensions wise, this one is pretty small (5.1”x2.4”x 1.1”). The button is very noticeably a button; to me this is important as with my old knock off doorbell, people would constantly push the camera lenses thinking that they rang the doorbell. Differences between this Ring Doorbell and Previous versions: I did some internet research prior to deciding for it, and I could only find a few things: (1) it supports only 2.4 GHz networks instead of being dual band, (2) it only works as a fully wired setup (3) it has a single faceplate and (4)it is way cheaper than previous models. To me, it wasn’t a big deal the doorbell not being dual band, I planned on using the 2.4 GHz band anyway as I have been with my knockoff brand doorbell. There are several obstructions along the way (two thick walls and some furniture between the door and my repeater, and my router is in the basement), and the 2.4 GHz network is usually better for that albeit a bit slower. This doorbell requires to have an existing wired doorbell setup, unlike previous iterations that you could have fully battery powered doorbell. Yet the setup is only needed for power. You will be bypassing the existing doorbell chime, thus, you will either need to purchase the model that include the Ring Chime (+20$), purchase a separate Ring Chime (30-50$) or use a compatible Alexa device as the speaker(s). I am using a few of my echoes and I like the setup a whole bunch. The Ring Video Doorbell has a single face plate (black) vs 4 different color ones for the Pro. I did search online for other faceplates and I found a pearl white one going for about 15$ but I am sticking with the black one. The newer model is about 70% cheaper. About 60$ vs the 200$ MSRP for the Pro. Issues so far: I haven’t had a lot of issues, but I already had one. I had some connectivity issues right of the bat. The fact that this doorbell bypasses the hardwired chime exacerbates this. No connectivity means no doorbell whether you have power or not. A few resets, I moved my repeater closer and it appear the problem was corrected. However, I point it out because when compared to my old 2.4 GHz knock-off video doorbell, I never had an issue. I am considering this as a one off but I will update my review if this issue persists. Bottom line What I liked: Compatibility with Alexa. When Amazon acquired Ring a while back, I just knew that integration with Echo devices would probably only improve but even knowing that, I was impressed. You can define specific devices you want them to work with. It allows for tons of customization including ringtones. I currently have two echo dots and an echo spot serving as my alerts and this setup works great. The video playback on the Echo Spot is smooth as silk with minimal Lag. I will be linking it up to my new Echo Show when it gets here, next week. I don’t envision any issues linking it up, but I will update my review if needed. It features an advanced motion detection system that allows for customizable alert motion zones. It is extremely intuitive to setup. Thumbs up, all the way. It was very easy to install It looks elegant yet sleek. It is cheaper than any previous Ring Model. What I dislike so far. It supports only 2.4 GHz networks. This is not a major negative as 2.4 GHz networks usually allow for a better range, especially if there are obstructions along the way. Still, it is worth mentioning. I have a hardwired doorbell chime that is useless now. If my WIFI fails at any point, my doorbell is dead in the water. I already had connectivity issues. They might have been a one off so I am not necessarily overreacting to them but I will update my review if needed. The first two negatives were design choices that allowed lowering the price point and they were something I knew coming in. However, they are still significant enough that I called them out. Overall, for the price, this is actually a very good device. If you already have a Ring doorbell, this item is not for you. If you don’t, and you are ok with a fully WIFI driven, hard wired power doorbell camera, I strongly recommend it.

I installed this Ring wired video doorbell and it has been working very well. The video quality is clear and the motion alerts are helpful for knowing when someone is at the door. The two way talk feature is also convenient so you can speak with visitors even when you are not home. The installation was straightforward if you already have doorbell wiring. The app is easy to use and lets you check the camera anytime from your phone. The product arrived well packaged and the delivery was on time. Overall it is a good security doorbell for home or business use and I am happy with the purchase.

We had a different brand previously and anytime someone would ring the doorbell it would freeze. I couldn't see the picture or talk to anyone. We decided to buy the ring. I didn't like the bigger one I wanted something that was a bit smaller. This one looks great and doesn't freeze when someone rings the bell. It also comes with different preprogrammed responses and you can control how long before the doorbell will respond. With it being Christmas time I have it tell them to please leave the package at the door and if they want to leave a message they can do so now. They also have seasonal responses as well that are really fun. It is hard wired so no worry about the battery life. The product quality I would say is way above others we have had. The night vision is okay but could be better. It was very easy to install. There are actually instructions that walk you step by step. The only issue we had was having it work with our existing doorbell. We had the same issue with the previous brand we had. I did buy the chime plug in and no issues. I can also choose a different ring for that which I really liked. My mailman was actually talking to me about it the other day. He was very impressed with the preprogrammed response and asked me if it knew he had a package. It will actually tell me there is a package but the response of leave the package is something I picked. You do have to pay a subscription to keep the videos (they all do that), but it offers different tiers that you can get. I picked one of the cheaper one as I really don't need all they added AI capability or features. It actually was the same cost as my previous brand. I would buy again and highly recommend.

Love the concept / how the device works so far. I also installed the 'corner mount' device with the doorbell. The camera is a wide-angle, so if you want / need to see activity on the far side of the door, just use the regular mounting plate that comes with the doorbell. Because I got the wired version, I won't need to replace batteries, which is great. You do need to put a jumper wire across two terminals of your existing (inside) doorbell box -- they supply the jumper wire, and the instructions on how to install it are good. This disables your inside box, so if you want to then hear the doorbell ring inside somewhere besides your phone, you'll also need the 'Ring Chime' accessory. (BTW... the reason you need to do the jumper is because there's generally not enough voltage / current to allow the video / audio of the Ring doorbell to operate, along with simultaneously ringing the inside box (doorbells are low-voltage devices)). The instructions advise you to turn off power at the breaker to install, but I didn't bother, and I didn't have any issues. Just don't deliberately cross the two wires together once you've removed the old ringer, and you'll be fine. You don't need to worry about polarity. Just connect the two wires to the two screw terminals on the back of the doorbell, after you attach the mount to the door / frame. A couple of notes on the mounting screws that came with the doorbell unit... The 'B' screws (doorbell to mount) are really too short. Thankfully, an extra set of longer wood screws came with the corner base. They were also flathead, which matters. The screws to mount base to doorframe weren't flatheads, which made the doorbell itself stick out a bit on the mount, until I used the extra flathead ones in their place. If I hadn't also sprung for the corner mount, I'd have had to stop at the hardware store to find replacement screws. Thus, I'm dinging the review to 4 stars. But the device itself -- no complaints, other than all of the screws are so tiny! LOL Thankfully, all of the screws (except for the security screw) use the same size screwdriver -- a #2 Phillips. If you have one on a smaller shaft, use it, as the shaft of a 'normal' sized screwdriver can be a bit large for the task. Usually, a #2 Phillips is on a regular sized shaft. A 'PH 0' or 'PH 1' will likely strip the heads, as they're too small. Kind of weird to have such tiny screws use the larger Phillips head slot, but they do. Since they include the security screwdriver (see below), I'd also like to see a smaller PH 2 included, to use with the screws, for ease of installation. The security screw comes with a small screwdriver to install it. But even with the screw installed, one can easily still pry the top of the trim cover out. I'd like longer tabs on the top end of the assembly, so that little miscreants aren't tempted to break off (or even accidentally move) the trim cover from the top. The instructions urge you to scan the QR code which comes on a separate slip of paper in the instructions. But I couldn't scan it properly. That meant I had to manually enter the 5-digit numeric version in software, which meant I had to put a magnifier on the code in order to see the number. I'll chalk that up to my older eyes, but it's still an issue I encountered. If you accidentally pushed the button while wiring it, and put the device in setup mode before you were ready... you'll need to remove the trim cover to re-invoke the setup routine (button perimeter lighting will rotate / change to white). This is where the device links with your phone, then registers with your home network. Once the doorbell is linked, it will check for firmware updates, and install those before you can start setting up the device via the phone app. Be patient; it takes a few minutes. I found the sensitivity of the motion detection needed to be dialed back a bit; otherwise, it would alert to every car driving past the house. There's a utility in the software to further fine-tune the 'active' scanning area, and I wound up using that, along with the 'smart detection' option (or whatever it's called), so that I could keep motion alerts down to people / animals actually coming up the driveway / approaching the house. The 'base' software adjustment for sensitivity is on a 3-position slider, and is pretty much useless (too sensitive, even on the minimum setting). But if you want to see *all* motion out to street level (and farther), this device can certainly do it. The wide-angle lens does distort people's images a tiny bit, when they're close at the door, but I'm willing to accept that, in order to have the wide angle capability. When you install & register the doorbell, it starts out making video captures that are saved for future viewing. This is only for the first 30 days, unless you purchase a monthly plan. I haven't had the device for 30 days yet, but since I can still get still-motion caps and audio stored without a monthly plan, that may be enough for me; we'll see. Night vision is black-and-white, but it's good quality. I'd have no problem identifying someone at the door at night. Daytime is full-color. TL; DR: A little bit of a pain to install / setup -- but once you do, works a treat. Glad I bought it.

We've had our Ring Camera Doorbell for several months now and it's truly been one of the best additions to our home. The installation was incredibly simple, even for someone who's not super tech-savvy — it took less than 30 minutes to have it mounted and connected to Wi-Fi. From a home security standpoint, the peace of mind it brings is unbeatable. Being able to check in on our front door from anywhere is a game changer. Whether it's a package delivery, a visitor, or just checking in late at night, the video quality is clear and reliable. Daily use is seamless. The app is user-friendly and works flawlessly on our phones. We especially love the affordable monthly service — just $2.99/month gives us access to recorded videos, which is extremely fair compared to other services. One huge bonus we didn’t expect to use as often as we do is the Ring Neighbors Community tool. It’s a great way to stay updated on safety alerts, suspicious activity, and other concerns from people in our area. It makes us feel connected and aware of what’s happening nearby. One small downside: the motion detection is a little too sensitive — it picks up every car that drives down our street, even when they’re not stopping. But ironically, that came in handy when there was a hit-and-run across the street. Our Ring caught the whole thing and we were able to help our neighbor by sharing the footage with the police. So even the one “con” turned out to be a benefit in disguise. Overall, if you're considering a doorbell camera, I can’t recommend the Ring enough. It’s affordable, easy to use, and most importantly, it helps you feel secure in your own home.

I purchased this to replace a battery operated one that was given to me. I moved that one to a door that did not have wiring. My front door had the wires from my old doorbell so it just made sense to get the wired Ring Doorbell. However, I am not tech savvy and was worried that it would be too complicated to download an app, scan the device in my phone, and wire it up. But I sure it, it was as easy as 1-2-3. The instructions were straight forward and easy to follow. I had it set up and working in ten minutes and if I can do it, anyone can. It works great and I don't have to worry about charging the battery every few weeks.

I have a person in my life who is impulsive and a bit of a possible concern to our security at our home. We priced out options through some different security agencies, most of which use Ring devices. We decided this was the better value for our household, especially since we got a great bargain on both wired floodlight camera and wired doorbell camera during Prime Days in July 2025. Decided to go with wired vs wireless so that we wouldn't have to fuss with charging, and I was worried about the south facing doorbell getting worn down by the direct full sun exposure and summer heat we have. These devices were easy to setup with the App and connected easily to our beloved Alexa! Had a 14 day trial period that is ending soon, so to continue to get the person alerts and recording, you do have to subscribe. It's a very reasonable price for what we are wanting, at $10/month for recording, person alerts and other features on multiple devices. The physical installation was simple with our old doorbell on the interior of our circa 1950's home. It's been rather enjoyable having the outdoor view from our home at any given time, and it's nice to know things that are going on. It is not so sensitive that it picks up our pets outside, which is good also. This device definitely gives us peace of mind, and I would definitely recommend. You don't have to subscribe for very basic features such as seeing live events, but we wanted to ability to record and detect people, in case any issues should come up legally (hopefully we will never need it).

These doorbell cameras are good when they work however I’ve had three already. The first one stopped working after a power hit. Replaced that one and the second one worked until I had to change the password of my WiFi and i couldn’t connect it to WiFi. Got a new one but couldn’t connect it to WiFi as well. Both with the second and third ones wouldn’t connect to WiFi and Ring customer service couldn’t help me so I said screw it and disconnected it and put back my original doorbell and bought a separate security camera and hooked that up (and yes it connected to WiFi). Update on 4/26…after my two star review a Ring specialist reached out to me to try and help me with my problem. While we didn’t come up with a definite cause of my problem, we we able to work out a perfectly satisfactory resolution so I’m upping my rating to four stars for Ring’s concern with my problem and their effort to make me a happy customer.