SOLEJAZZ Heavy Duty Retractable Workbench Caster Wheels kit | 300KG Capacity Heavy Duty Workbench Caster All Steel Construction Urethane Wheels, Bonus Install Template, 4 Pack

I was a little sceptical that these would be any could as they were quite cheap compared to alternatives. But they are well made and doing a great job on my 250kg table saw. They come with self tapping screws but I used M6 bolts instead which the holes are a perfect size for (4 bolts per wheel). One of the reasons I think they are cheap is they come completely disassembled however this makes fitting much easier and it only takes a minute or two for assembly. I bought the 400kg model as there wasn't much difference in the price. They are very easy to engage and release and that is on my 250kg table saw.

I'm sometimes sceptical of some of the unusual name brands, but these are good quality, sturdy and value for money casters. I've fitted them to the legs on my pool table so it's easy to move against the wall when not in use to make more space and it's perfect for that because the lever allows me to then lower it wherever I want it. The instructions are fine, but be aware of the two different size bolts because the difference is subtle. Fitting was easy using the screws provided, because there's a paper template for driving some pilot holes in the wood. Make sure you use the template up the right way and all will be fine. Overall I'm very pleased with these and their work smoothly.

The instructions are terrible. There's two diagrams showing parts and then an assembled caster. It's not hard to work out how to assemble them, with one exception. It's not clear which way up the base plate into which the caster itself is inserted. So, here's my advice, 1. Attach the mounting brackets to your legs before you do anything else. 2. Use your own wood screws. 3. Use the template without cutting any of it off (like another reviewer I didn't and they fit perfectly, they would have been too low if I'd cut the template). 4. Once the bracket is attached, place the base plate next, flat side down, flanges up. 5. Attach the caster to the base pate. 6. Attach the lifter peddle. Overall excellent. However, 1. When lowering the legs, if the caster is facing inwards, it won't lower fully and you'll need to 'kick' it around a little. 2. They really do stick out a long way, I know this is probably unavoidable, but be conscious about where you attach them, they're going to be easy to trip over.

Fitted these to my 8’ x 3’ wooden work bench which is very heavy and sturdy. I was sceptical that these would work with the weight and move smoothly across a (relatively smooth) concrete floor. These worked brilliantly moving freely across the floor even with the workbench full of kit. I joined the lift arms together at either end so the bench lifts evenly at each end (it stops the twisting created doing corner at a time. If you need some lifting castors don’t hesitate and get these, as I definitely recommend them.

Used the template to fit the first castor frame and found that once released the castor still made contact with the floor. Not a great start, so when putting the castor frame together don't make it too tight a fit with the release pedal. My next issue was with the quality of the screws, I needed to remove the first castor frame and my screwdriver (correct size) shredded the screw heads, the fine filings this produced stuck to my screwdriver and were sharp on the skin. This happened with all four screws. After a lot of fettling I have castors in place and each one clears the floor, once released. This is definitely a "measure twice cut once" task, so check the template. I would also recommend having some better screws at hand. That said once fitted, the castors do a good job and I happily move my bench around the workshop.

Very impressed with these, and I am not easily pleased. There are a lot of people saying the screws are garbage so I was prepared however, seems these other reviewers don't know the difference between a PH2 and a PZ2. Use a PH2 driver bit and toenail the pilot holes on an angle so you have clearance when driving the screws and they go in perfectly well. The screws are designed for the sheer value and weight so just make sure you use the correct driver bit and you are fine they are very strong. I would very much recommend!

I admit to being a bit sceptical buying these as my sons lathe and bench are super heavy but these wheels have been amazing I can move it with ease by myself should I need too I highly recommend these the quality is very good the included screws were sturdy and didn’t mar when screwed into the bench and the brake performance is good and they were value for money glad Itook the plunge and brought them

Solid, well designed and engineered, moves my 120kg top heavy bandsaw around effortlessly. Very easy to engage/disengage. The screws are self tappers, not woodscrews, and I got a tight fit on to the metal saw casing after drilling a pilot hole without any difficulty. I thought I might have to use bolts but didn't need to, the screws took the weight without any problem. The heavy saw is now very manoeverable and I would buy these again. If I was fitting them to a wooden bench I would use woodscrews to reduce the risk of the shallow self tapper heads slipping.

Correspond à la description, j'ai un établi en bois massif avec toutes les machines, il fait plus de 250KG, et ça roule parfaitement.

werkt geweldig, zware werktafel ,inclusief apparatuur, worden moeiteloos opgetild en de werktafel kan worden verplaatst

Muy buen producto, la verdad me sorprendió el peso que resiste... en mi mesa solo ocupe 2 ruedas ls otras 2 las tengo de reserva para otro proyecto... feliz con la comora

No cóż, to także późne odkrycie. Ciężki stół, do przesunięcia którego trzeba było użyć dużej siły, a teraz przesunięcie (przejechanie) kilkadziesiąt metrów po kostce brukowej to przyjemność. Polecam.

عجلات جانبية . عند انزالها للاسفل يعتمد ما وضعت له على العجلات فيمكن تحريكها بسهولة . واذا رفعت لاعلى يثبت على الارض طريقة تركيبة كانت مرفقة بادق التفاصيل .شكرا.