Large 19"x17" Clear Windshield Compatible with Magna Shadow Spirit Sabre

First off, This product shipped fast and I received it on time with no damage and it's packaged very well. I was looking for a smaller windscreen because I like the look better. I mounted this on a Yamaha Road Star Silverado with absolutely no issues and did it in under 15 minuets. Its VERY easy to install. After installing I took about a 45 minute ride...from 0 to 45 mph the screen is very stable, once on the interstate it did very well from 45 to about 65-70 mph, over that it had somewhat of a vibration at the top part of the screen. After returning I checked all the hardware and everything stayed put. (I did use a small amount of Lok Tite on all the hex screws. Keep in mind as you can see in the pictures, it is a very small screen for larger bikes, so make sure it's what you want. Just an update Father's day I did a little over 360 miles a lot of those miles on the highway at speeds well above 75 and this wind screen did exactly what I wanted. This is a damn good product for the money!!!

Even though it seems to be a standard in aftermarket windscreens I did not care for the mounting brackets. They're difficult to install and difficult to adjust. But in the end I got the windshield mounted and it does a good job. It did not come with instructions so it will be up to you to decide the best way to mount it. Visibility is great wind deflection is great. Just be careful when handling and cleaning because the clear plastic scratches easily.

Added this to my 2005 Suzuki Boulevard C50, complete install took less than fifteen minutes. Provides just enough protection from the wind without being a giant sail on my bike. Just a note that made assembly easier. Harbor Freight carries tape called HFT self-bonding super tape. Rather than over tightening the handlebar clamps take about one inch of this tape and stretch it around the handlebar then put the clamp in place. The tape locks the clamp in place and the windshield will not move, guaranteed. Couldn't be happier with this windshield and highly recommend it to other riders.

Allow me to preface this review with the fact that the windshield arrived cracked. Now, with that being said, it was an easy install. It took all of 15 mins to get it set up. Pros: It’s easy to set up. It is a good height for most riders at or under 6ft in height. It works well at or under 50mph. Cons: It isn’t necessarily what I would call “sturdy manufacturing”. Because of the limited brackets, it is at risk of movement and/or breaking. This brings me to my final con…it will bend backward at speeds of more than 50mph. This can be a safety concern while riding. Final conclusion: It’s a good windshield for the money, but understand it is an inexpensive option and with that it has its risks. I would recommend it for a learner or someone who doesn’t desire to go faster than 45 or 50mph. I would not use it for a full size bike. I hope this helps some of you.

With what certain brand name windshields and mounting hardware sell for? I'd be lying if I didn't say my expectations weren't the highest. Fortunately, I'm VERY pleasantly surprised. It's a nicely made windshield, and the mounting hardware included is very capable. I'm running aftermarket buckhorn handlebars on 3" risers on my 2000 Road Star, very similar to the stock bars on an early 70s Harley FLH, and this windshield fits perfectly. It's a bit on the smaller side, which gives it an almost sporty look, but provides ample protection. I'm tellin' ya, this was definitely the deal of the day!

I have several issues with this product. I have it on a 2020 HD Softail Slim. The windshield fits and was okay to install. There aren't much in terms of handlebars for the Softail Slim, so the issue is the bike I was putting it on and not the product. The windshield reflects everything! I didn't notice it at first in the daytime, but at night it is unusable. Part of the issue is my size, I look through it and not over it, but at night my speedometer is reflected in the glass, and because it is curved I see it 3 times instead of just one. My lights are also reflected, so it is really difficult to see through. The windshield has swirl marks, again, not visible in the daytime, but once you start having lights shot through it, you see them. Any lights, headlights or taillights have a large starburst on them. I do not consider this a safe windshield for night riding.

I choose this screen after searching for a while. I liked the size and the price. Some of the other universal screens are way pricey. I just couldn’t justify their price for something that isn’t made to fit my bike specifically. I’m impressed with the sturdyness of the screen with its old school metal braces. The clamps are plastic with brass inserts. I took my time and didn’t tighten everything until I got it where I wanted. The clamps fit quite snug on my Honda’s 1 inch bars. It stays in place throughout higher speeds and wicked cross winds. I’m sure the screen is made of acrylic, not polycarbonate. But, at this price point, you’re not getting polycarbonate. I’m quite satisfied with the wind blocking performance. My last two bikes have had fairings, so gong back to a naked cruiser was a switch. I can’t stand the wind on my chest trying to push me off the bars. This screen has eliminated all that. I have it mounted so that I view the road over the top of the screen, but I’m still getting full wind protection from the slipstream the shield creates. That said, the shield is pretty decent to look through. My advice is to take your time fitting the screen where you want it and then tighten the clamps in sequence a little bit at a time. Go around to all the hardware a few times tightening before you are satisfied that all are snug.

Ordered 6/3 and it is out for delivery today 6/7. Quicker delivery than expected as it gave me a window of 6/7-6/11 for delivery. Already received email from Seller asking about the process so far and if I'd received it yet so that was a nice thing to see; dont see that often from companies. Will update a product review after I get it today and install it on my C50. Will update pictures as well. UPDATE: Received today. Packaging was as it should be. Installation took me about 20-30 min. Would be easier with a 2nd person but not too bad. I took the mounts off the windshield and put them on handlebars first. Made it a lot easier. I have 1'' bars and the fittings were extremely tight; couldn't tighten all the was as I was afraid of stripping. For 7/8'' bars this would be a perfect fit but they are tight for 1''. They give you plastic fittings that should go on handlebars first to keep from any wear but wouldn't come close to fitting with my 1'' bars. Windshield measures as it should but it looks super small on my c50. It'll work for now but definitely need a bigger windshield to look better. Overall I'm satisfied and think this is a good buy for the money. Would be nice on a 650cc or smaller in my opinion but again, it's a cheaper windshield hence the size. Plastic is clear and clean and no cracks. Chrome plating looks nice and shiny too. Will update more once I ride a little this weekend. Hopefully it stays in place.