Amazon Basics Car Sound Deadening Mat, 14.5" x 10", 10-Pack, Noise and Heat Insulation, Self-Adhesive, Vibration Dampening

The Amazon Basics Car Sound Deadening Mat is a solid budget option that works well for reducing road noise and vibrations. It’s easy to install with the peel-and-stick backing, and you can cut it to fit different parts of your car. It definitely makes a noticeable difference in sound, especially for the price. Not the thickest or most premium material, but great if you want a quieter ride without spending a lot.

Works great, reduced cab noise by 70-80% only applying to the floor panels and rear cab. Easy install, stuck well. No discernible difference between this and the expensive name brands so far.

Works great and sticks really well, only bad part is it did not stick on the body glue/silicone that comes on jeeps in the rear. I did notice a reduction in noise, waiting for summer to see if it helps with heat. I ordered 2 boxes for a 4 door jeep but had alot left over, I did cover very high on the firewall so if you don't you could probably get away with 1 box. Most 4 door cars will probably take 2 but it's still a very good value.

Great product for a much cheaper price than the name brand products... works extremely well to reduce sound...

Before I start, make sure to buy a roller, a good quality roller, they have amazing kits that now come with different sized rollers, trust me, invest in those because I assure you, you will end up using them for something else down the line! I have been using sound deadening material for a very long time, even before it became a very big thing. I have sound proofed many cars from BMW, to my beautiful Acura Legend LS coupe that I miss so much, to my now Ford Explorer 2013 Limited. Now, I've been accustomed to using the more expensive brands, however, those are double to triple the price. Now, are these better than those? No! But it truly depends on the car you have! I won't use these on a very expensive car! Makes no sense to use these on a brand new car as well, because for something like that, you want to go all out. Now, in truth, for the price of the more expensive name brand, you can buy 2 to 3 of these, and In truth you get more than just a bang for your buck! If you have a day, some beer, maybe a BBQ, a wife or girlfriend that is out for the day, take your time and hit every spot that is metal within your car with this. I first started with the rear of my explorer, I removed the spare, the carpet and just started dropping these in, use your roller and take your time to roll it and spread it out, for these you will not need to heat it up before using the roller, but just take your time. I removed the sub woofer box, and placed some behind it ... I will give you some advice, if you ever had planned to change out the speakers, this is a perfect time to do it! I then removed the rear door panels and placed these inside of the door, and also on the outer layer of metal, most people only do the outer metal part and not deep inside, do both, you will thank me later trust me, it took me longer because I have large hands that only women can love, but not the right hands to try to get into every area that is small and tiny! If you really do have the time, take the seats out and remove the carpet and do the floor, and if you are lucky enough to not have a sun roof, remove that top and do the inner roof metal, front doors and then go to the hood, and remove the sound barrier of the hood, stick this on, put that barrier back on, and boom, you are all freaking welcome.... You will not only notice that it has help with road noise, you will see that the AC and heat will start to feel better as this will also help with retaining the cold and heat. The only problem now, and unfortunately this isn't part of the warranty, you can no longer use the road noise as an excuse to not hear your spouse any longer..... But hey, you will still thank me This installs very easy, it has the perfect thickness to keep enough sound out.... it will be an all day thing, but when that bass hits harder, forget about it....

I've used Dynamat in the past, and while there's no doubt it's the industry standard, it's become very pricy, so I was intrigued when this affordable alternative came up. I have a 2010 Ford Ranger XLT - for being as recent a model as mine is, even with the nicer XLT trim (woohoo, carpet!) this is clearly a truck that was built with "basic 90s pickup truck" standards of NVH (noise, vibration, harshness). There isn't a lot of sound deadening, so the doors clatter a lot when closing, and the combination of wind, tire, and engine noise in the cabin can get tiring on longer drives. I ordered one package of the material, and approached it with the mentality not so much of covering the entire inner door, but using it strategically to diminish resonances and isolate rattles. I will probably order another pack, but I covered about 50% of both front doors and added smaller pieces in the rear cab panels of the extended cab (mine does not have rear doors, just cubbies to hide the jumper seats) to act as dampeners, and those two applications alone have made a huge difference. The doors feel much nicer and more substantial to close - not quite 1990s Mercedes-quality, obviously, but there's a nice low "thunk" where there used to be an "old pickup truck" tin can door rattle. Road and engine noise is much quieter - it's easier to hear soft passages in music or podcasts even with the stock radio. I had no issues with quality or ease of installation - the material adhered easily. No weird smells - also another important factor. Overall, I think this is an excellent product that, unlike the name-brand stuff, is priced appropriately for what it essentially is. I'm sure you can get more of a luxurious hush with the thicker stuff, but for something like the cab of an older pickup where silence isn't necessarily expected, but a little more civilized would be welcome, this is perfect.

Great product. Easy to cut and use, easy to form. Would definitely get again.

I purchased the 18x32/9 piece set and I’ll preface this by saying it met and exceeded my expectations. 6.5 pieces were well more than enough to cover a sedan’s 4 doors, rear deck, trunk, and trunk lid. I covered maybe 60-70% of each panel at which point the reduction of sound was very noticeable. To install, I used a heat gun and a gloved hand to press the warmed material on, but a roller would be recommended. I plan on doing the wheel wells when spring comes along with the remaining pieces, which I’m confident will decrease the outside noise even further. If you are looking for sound deadening material on a budget, I would highly consider this product.

Works well, good value. I didn’t notice a huge difference, but the metal definitely feels more solid.

こういったビビり防止のデッドニング商品は、なんか無駄に値上がりしている感じがあるが、このAmazonBASICの製品は低価格でたくさん買えるのがいいですね。 しっかりとした重みがあり鉄板や樹脂材に貼るとビビりが確実に止まります。 加工性もよく、使いやすく、いい製品だと思います。

Muy buen producto

I recently installed the Amazon Basics Car Sound Deadener in my 2006 Chevy Express 2500 as part of my camper van build, and it’s been a game-changer for improving cabin comfort. Here’s my honest take on this product: Installation Experience Applying it was fairly straightforward. The material is flexible enough to work around the curves and contours of a van, which is especially useful in an older model like mine. I’d recommend taking the time to prep the surface well—cleaning with alcohol before applying made a big difference in adhesion. Using a roller (highly recommend!) to press it down in tight spots really helped, particularly around the wheel wells, where it tends to reduce a lot of road noise. Performance for Van Life The biggest win here is the reduction in noise, especially helpful when you’re trying to get a good night’s sleep in the back. After installation, the overall cabin noise is noticeably lower, especially highway sounds and vibrations, which is great when you’re using the van for long drives or trying to work while parked. While it won’t make your van completely silent, it cuts down significantly on rattles and outside noise, which I appreciated for both driving and when it’s parked up for the night. Budget-Friendly Solution For anyone doing a camper van conversion on a budget, this is an affordable sound-dampening solution. Sure, high-end products might offer a bit more insulation and noise reduction, but for the price, this Amazon Basics deadener does a solid job. It’s great if you’re doing an entire van and don’t want to spend a fortune just on soundproofing. Potential Drawbacks One thing to note: this material isn’t quite as thick as the top-of-the-line deadeners, so it may take a couple of layers if you want maximum quiet. Also, I noticed a mild smell when first applied, but it faded after airing out the van for a few days. The adhesive is decent but not as heavy-duty as premium brands, so double-check it after a week or so, especially in areas with more vibration. Final Thoughts Overall, the Amazon Basics Car Sound Deadener is an awesome find for anyone outfitting a van or truck on a budget. It’s easy to install, provides solid noise reduction, and makes my Chevy Express way more comfortable for road trips and camping. If you’re looking for an affordable way to dampen noise without cutting into your camper build budget, this sound deadener is a great choice. Just be prepared to use a bit more material in high-traffic areas or consider double layering for the best results.

After installing the Amazon Basics Car Sound Deadener in my vehicle, I am impressed enough to give this product a solid 5-star rating for its effectiveness and ease of use. The first thing to note about these sound deadening sheets is their size. Measuring 36.83 x 25.4 cm each, they are conveniently sized for various applications within the car, such as the doors, floor, or trunk. This versatility is a significant advantage, as it allows for targeted sound deadening where it's needed most. Installation of the sheets was straightforward. They come with a self-adhesive backing, which made applying them to the car surfaces a simple task. The adhesive is strong and ensures a secure hold, which is crucial for a product that needs to withstand the vibrations and temperature variations of a vehicle. The effectiveness of the sound deadening was immediately noticeable. Road noise, particularly the hum that comes from the tires and wind, was significantly reduced. This created a much quieter and more pleasant driving experience, allowing for clearer audio from the stereo and easier conversations with passengers. The material of the sound deadener is dense and appears to be of high quality. It's thick enough to be effective, yet pliable enough to conform to the various contours of the car's interior. This balance is essential for both sound dampening properties and ease of installation. The pack of 10 sheets in a single pack offers good value. It provides enough material to make a noticeable difference in a standard-sized vehicle without the need for multiple purchases. In conclusion, the Amazon Basics Car Sound Deadener is an excellent choice for anyone looking to reduce noise in their vehicle. Its combination of effective sound dampening, ease of installation, and good value makes it a product well worth considering for a more enjoyable driving experience.