4 Channel Speaker Selector Switch-Multi Zone A B Speaker Distribution Controller Box w/Independent Audio Source Volume Control,Supports Home Theater Stereo Amplifier Receiver System-PSLSW4,Black

متوسط

I have the PSLSW4 4-zone speaker controller but they also make a 6-zone controller. I have this mounted on my covered patio and it is fed from a Bluesound Node audio streamer and a Fosi Audio TB10D amplifier. My Fosi amplifier puts out about 100watts a channel at 8ohms with the upgraded power supply. The Pyle speaker selector will accommodate 2 separate input devices. A or B so you could have different sounds playing in different zones. I am only using zone A. The preferred zone is selected with a switch adjacent to each volume control. It is either A or B but to turn off individual zones to be OFF, you must rotate the volume knob to OFF. The volume knob click into each volume level - it is not a smooth rotating dial but it works fine. There is no crackle or pop when moving the volume control knob. the back of the unit has plenty of room to connect the speaker wire either directly or using a banana plug. There is no balance control for right to left channel adjustments. I am feeding 2 sets of patio speakers and 2 sets of rock speakers out in the yard and all are fed with 14awg wire. All my speakers are 8ohms. My speakers sound fine and they get loud enough for adequate sound. This is an outdoor background sound system and it won't sound like a rock concert in your backyard. Make sure your amplifier is stable down to 2ohms if you will be playing all 4 speakers simultaneously. If only one speaker is ON it will see an 8ohm load on your amplifier. If any 2 speakers are ON, your amplifier will see a 4ohm load. If any 3 speakers are ON your amplifier will see a 3.1ohm load. The Fosi class D amplifier I am using is rated from 2 to 8ohms. This switch can handle up to 100watts RMS input with 18watts RMS output per speaker output. This switch is passive so it doesn't require any power source.

Estoy muy satisfecho con este equipo, puedo distribuir muy bien mis bocinas, pero sobre todo, nivelar el volumen de cada par.

I have a nice receiver/amp with 2-Channel input/output. I needed a Speaker Selector Switch to control 4 discrete listening zones from the two different inputs. The Pyle PSLSW4 Multi-Zone Speaker Selector System is just what I wanted. The unit was incredibly packaged which is a good indication of the quality of it's contents. The unit was easy to install especially with the Sewell SW-29863 Deadbolt Banana Plugs (also purchased from Amazon). Once connected it was very easy to adjust the volume to the front and rear ceiling speakers in our great room to extract the best stereo affect. When entertaining we can have lower volume inside and more volume outside on the pool deck. Really improves our flexibility for entertainment. It is not an Amplifier so your Receiver/Amplifier needs sufficient power to drive all of your speakers.

Compré uno para mi casa y a menos de 5 minutos que quería comprar otro (para ponerlo en mi oficina) el precio ya había incrementado $700 mas, lástima de vendedor. Veré si funciona bien el único que compré!

Very nice. A passive unit, sound is presented uniformly in every channel. I would not consider this product as degrading my audiophile sound. Each speaker has different efficiency therefore volume control helps to match volume and compare.