TP-Link TL-R605 SafeStream Gigabit Multi-WAN VPN Router

I have been using this for more than a week, overall good product. Must but if you want to use with multiple internet connections in one networkPros: extremely easy user interface5x gigabit portsWAN fail and load balancingSmall form factorNo need for omada contollerSetup and forget configurationsCons: don't use with omada contoller. Horrible placement of options.WAN connection polling time cannot be set in standalone modeSome settings require hard reboot to apply, auto soft reboot not reflecting the settingsThe order of WAN port number is reversed for working order, last WAN is default not the first one

-Needed gigabit load balancer, already had the 470 which limits to 100mbps-This has that and works with airtel-huawei/act-tplink-archer-c5-I have mercusys 4 node mesh H30G (has gigabit ports), so am getting near 70% of speed from the 2 connections-2 days now & getting good speed on the across. All devices are also working fine (cams, switches, lights), so greatNOTE:-Make sure the airtel/act router have gigabit ports. some dont but their inherent wifi's do else u limit there. check with isp & replace if needed. if u r on a high speed plan, they will listen-use cat 6+ cable (5e too but not 5) as that limits, gigabit cable from router to this LB router and this to mesh/router is a must-if you are using VPN than add application based else VPN will disc too often when LB routes to different ISP

Great device for multiple ISP load balancing. Have a 300 Mbps Airtel fibernet and a 200 Mbps ACT fibernet connected to this and it combines and sends 500 Mbps to the mesh router... Acts as failover device for uninterrupted internet. Add a multi device UPS to this and keep doing uninterrupted calls all day long.

It perfectly Load Balances Upto 4 ISPs, You can set 3 Fiber Broadbands + 1 4G Router and it will distribute Traffic to all 4 Connections. Does not have a wifi so need a Separate Wifi Router. Its a good alternative to 470 and 480 Series as their Limitation is the Link is only upto 100Mbps. Its pretty common to have 200~300 Mbps Internet Speeds now and some players offering speeds up to 1 Gbps. In that case the 470 and 480 will be a limitation as max speed attainable is 100 Mbps.Installation is straight forward , you need to make sure the DHCP config in your ISP Routers have a Different IP Subnets else There will be a conflict. Rest you can go by Videos and Community Support and Vendor Support is Good1 Downside : When power goes down, it takes up to a minute to start working . On a Good day , you wont know if one of your ISP is down. On worse day, you will see that you need to do a refresh on your browser or wait a few seconds for connection to fail over.EDIT : Some Reviewers are mentioning that this product is available at half the price in Market. So its double the price on Amazon. I would suggest you do your research about the price well before buying. I bought as soon as it launched, so it was expensive for me at ~7K INR

This product met my expectations. I was looking for a Multi WAN Gigabit Broadband Router in an affordable price. There are many other models available in the market, but either they are very expensive or they are not gigabit. I've set up two ISP (BSNL+Alliance) with this router and getting merged speed of the two. The setup is vesy easy even for a newbie. The UI is sleek and user friendly. It's been more than one month now and it's working flawlessly.

It's average product. Different routing policies time based ACL rules etc can be configured. It can be used to sum up bandwidth for LB purposes but for a particular TCP session one single ISP will work. One major negative, if you are using two or more ISP and primary one down, it wouldn't detect and failover unless direct link or port of primary ISP goes down. In short link monitoring mode is not working. There is lot of open source products like pfsence available instead of this.

I have bought these multiple times , i have had to get one that died replaced by tplink , they were super awesome on these routers and honored the warrenty. Omada controller also runs awesome on the device.Note this is not a wifi device.

I have 2 ISP connection at home. So, that when 1 connection goes down or becomes slow, i can continue the office meeting with the other ISP connection. I was switching between them manually. Also, i had configured to have 2 Wifi signals in the house and this was causing wifi interference between the 2 signals in some zones.I am now using this as 2 WAN inputs and 1 LAN output. I have connected a single Wifi router to the LAN and turned off the wifi from the ISP modems. I now have load balancing between the 2 ISP and also get the sum of both bandwidths when needed. It is perfect for WFH.