010 Viton O-Ring, 75A Durometer, Black, 1/4" ID, 3/8" OD, 1/16" Width (Pack of 100)

Needed new O-rings for our Freeze Dryer Vacuum Pump hose. Ordering these were the perfect solution today, and more left for future hose maintenance.

I purchased 214 orings on trident and keep getting leaks, I got this one and are working better. I work in a hot and humid environment, you need the best, and this ones has better price

High stakes pai gou can be a harsh mistress. After betting my company's pay roll on a deceptively bad hand I realized I had nothing left to live for and decided to end it all. So I got my trusty 20 Guage Remington 1100, my last true friend, out of the closet in order for her to usher me out of the mortal coil. Wanting to die where I was happiest I took my dear old friend to my favorite clay stand. I was going to end it all after one final clay. With my trapper blissfully in aware I loaded my 2 shells, one for the clay and one to put an end to my pain. I called pull. The first bird flew from the launcher. I gave it just the right lead, pulled the trigger, then BANG the shot finds its mark and powered the bird in flight. Not too bad for my final clay. I then turned the gun on my self and pulled the trigger; then CLICK, nothing happens. Did my dearest friend abandon me too? It turned out my dear friend was unable to feed her second shell. I hit the latch on the underside and the gun manually feeds."Gun malfunction" called my trapper, still blissfully unaware of my ultimate plan. "I'll give you this pair again" was his next statement.I loaded an other round into the magazine, I figured I could break one more clay before I end it all."Pull" I called, again the first bird flew from the launcher and again, BANG, I powder it with ease. Again I turn the gun on my self and again, CLICK, again she failed to feed."Might need a new o ring" my trapper remarked.Of course I could have easily loaded her manually but something about ending my life without fixing my old friend felt wrong. She deserves better. Luckily Amazon had these O rings in stock and they were eligible for Amazon Prime free 2 day shipping. Not wanting to terry too much longer in this sorrow known as life, I was able to order with one click, and with that I was just 2 days away from eternity.The package arrived earlier than I expected today and the O ring fit faithful ol' Bess like a glove. The package arrived before noon so instead of just one final clay I figured i had time for one final round of clays. I didn't know what I was going to do with the other 9, but getting the 10 off Amazon was still cheaper than ordering one from Remington.With the new O ring snugly in ol'Bess I headed down to clay range to do one final round of 50 before I step off this mortal coil. With the new O ring in place ol'Bess cycled like a champ almost like she was young Bess again. I think this was my so time highest scoring round, ever. Not a bad way to go out indeed.Station 11, this was it, final pair. Two more birds before I step into the cold embrace of death. "PULL", BANG, BANG; both clays shatter into powder. I can now die happy. I loaded my final shell."Hey there, is that a 20 Guage 1100?, I got one of those for my daughter and she loves it"My focus was broken as a gentleman approached me with his small talk.I replied with a pleasantry, and he complimented me on my breaks."That's a mighty fine gun you have and that's some mighty fine shooting, why don't you join me and my daughter for one more round?"I figure why the hell not and accepted.It turned out my new friend is a super friend at the oil company Texxon Moniker and was looking for some one just like me to hire on and to date his daughter.This product not only saved my life but also opened the door to my brighter tomorrow.Thank you no.19 viton Orings I owe you everything.

Used to seal custom oil port fittings on motorcycle

So far this O-ring is working perfectly and for a fair price.

A few of my MSR fuel bottle O-rings were starting to crack and show signs of failure. I did quite a bit of research to find replacement O-rings. The standard replacement O-rings run from .50- $1.00 and anywhere from $2.00-$10.00 for S&H. I learned from more experienced gear nuts than I, The MSR O-ring is a soft silicone that is not chemical resistant. While the original MSR O-ring held up quite well for me with minimal use over the last 8 years, it could have lasted longer if MSR had used higher quality O-rings.I searched for an O-ring that was made with longevity and direct contact with corrosive liquids in mind. The Viton O-Ring is made for direct contact with chemicals, such as fuel, oil, diesel, kerosene, white gas, unleaded gas, etc.. The AS568A #213 Viton O-Ring matched the actual dimensions of my old MSR 33oz. Fuel Bottle with gray screw on lid.It arrived very quickly in the mail. For the price of one MSR replacement O-ring, I purchased 25 higher quality and hopefully longer lasting O-rings for the same price after S&H. I immediately replaced my old MSR 33oz. Fuel bottle's O-ring with the new O-ring. It fit perfectly as far as I could tell. Granted, the O-ring is measured in hundredths of an inch, if I was off a few, it doesn't show. The cap closed correctly, putting pressure on the O-ring. I snugged the cap up to the O-ring and then tightened another half a turn. I left the fuel bottle full of fuel upside down for a few hours with no sign of leakage. A new model MSR 30oz. fuel bottle arrived in the mail as well. I immediately put a new Viton O-ring on it as well. Time will be the true judge of quality. For the same cost as one MSR replacement O-ring, I have enough O-rings for all my MSR fuel bottles to last the rest of my life. Only a 4 star rating until the O-rings get some age and wear on them.03/02/17 UPDATE: 224 Viton Oring 75A Durometer 1.5" x 1/8" works great for a combat ring when paired with a tailcap ring by Solar Force or SureFire. I bought the 2" OD and it is a little big.

I found the link to these on a forum post and I can confirm these are the perfect replacement for the molded gasket on the E46 Disa Valve.

Bought to replace 2 failed o-rings on my e36 oil filter holder.On early e36's there are 2 ports on the side that are sealed with a cap/ spring clip and o-ring - the o-rings can fail - I used these to replace them. They seem to be holding up well.

They appear finer/thinner than OEM, however a caliper check indicates they are the same. Perhaps it is because they are a dull, flat finish as opposed to the glossier OEM.Have not tried them yet, but I believe they will be fine. Better than now paying $2 each for those supplied at the dealership.Also, the durometer of 75 means they can tolerate higher temperatures.

Needed this O ring to fix an outside tap. I couldn't find this size at any of my local plumbing supply stores. I didn't really need a 100 of them but I do have another of the same outside tap so I'm prepared for the future. So far working great.

I bought these to replace cracking o-rings on MSR fuel bottles for my whisperlite stove and they fit perfectly.

What can I say? It's an O-ring. Installed in my commercial Hobart Dishwasher and works great! And Cheap Cheap Cheap compared to an actual Hobart O ring at $100+ ... Crazy right!?!? So far so good, chemicals and heat not affecting it, no leaks. Great quality!

06 Night Train. No leaks after 3 hole fluid change. Keep the rubber on the road. Cheers