Brake Kit for Audi Q7 Porsche Cayenne Volkswagen Touareg Drilled and Slotted Brake Rotors Ceramic Brakes Pads Front and Rear Replacement: 13.78" inch Front and 12.99" inch Rear Rotors

I ordered this brake kit to fix a low-speed brake squeal that resulted from a prior brake pad replacement without replacing the rotors. The cost of this kit includes both front and rear brake pads and rotors and they also throw in a container of DOT3 brake fluid, a can of brake parts cleaner spray, and a couple of packets of anti-seize grease for places that the brake pad ears slide in the retaining clips. These are heavy duty disc brake rotors and pads cost me a fraction of what my local auto parts store listed them for. Installation was fairly easy, despite NO INSTRUCTIONS included with the kit. I watched a couple of installation videos on YouTube and gained enough confidence to do the job. A couple of things that I had not expected: the boxes containing the rotors and pads are not marked to tell you which axle they go on. With my Ford Expedition, there's a set of rear drum brakes for the emergency brake and the correct rotor needs to be able to fit over the drums. You can either slide the rotor over the lugs on the rear axle after removing the old rotor to see if it fits, or just pick up the rotors: the front rotors are much heavier than the rear rotors and this makes sense since the rear rotors have the extra metal removed so they fit over the emergency drum brakes. The other unexpected problem I encountered was the old rotors were seized or rusted onto the rotating hub that contains the lug bolts. I had to beat the inner surface of the old rotor with a 4# sledge hammer to break it loose and remove the old rotor and it took a lot more force and hits with the hammer than I would have thought, but that's not an issue with the Detroit Axle kit. The kit comes with two identical slips of paper with printed instructions for bedding the brakes after installation. I followed the instructions the best I could -- the neighbors looked at me oddly when I accelerated down the street, only to ALMOST stop, then repeat a few more times. After bedding the brakes, the squeal is gone and the brakes work great. I would recommend this kit to anyone that has a bit of mechanical ability or a DIY attitude as well as the required tools, including various sockets, hex wrenches, floor / hydraulic jack and jack stand.

Needed replacement. Fitment was correct and everything lined up well during installation and the included hardware helped make the process smoother. Braking is now smoother, quieter, and more responsive than before with noticeably better stopping power compared to the old worn brakes and rotors. Stopping feels more consistent during regular driving. One of my calipers was already broken, but that was unrelated to the brake kit itself. So far they seem durable and I haven’t noticed excessive brake dust after normal use. Overall solid replacement parts and a clear improvement in braking performance. Make sure to double check compatibility with your vehicle before ordering.

Perfect fit for my daughter's 08 GMC envoy, the brakes squeak a little bit that's typical for ceramic. I tested them pretty heavily to make sure they were safe and worked properly. Went from 70mph down to 25mph pretty quick. She drives an hour 1 away to work every day so I make sure she has good quality parts. Especially with the brakes they perform great. They come with everything needed to a solid replacement. The slotted rotors are good at dissipating heat quickly as to help the pads not burn or crystallize.

Very high quality everything fit perfectly on my 2004 350Z convertible and after bedding the new brakes they are very responsive and quiet.

They fit my vehicle. I was metal on metal. I live approximately 2000 feet up a mountain. These brakes will get a true test of quality. They were very affordable given the local parts house wanted over 500 for the 4. It would have been the Detroit Axle brand

I got this for my 2000 f350. I tow a lot. Granted my trailer only weighs about 8000 lb but I tow it daily with my mobile mechanic business. I did run a break-in with these rotors. I don't think a lot of people understand that rotors do need to break in, all of the bad responses I see on here are likely due to people thinking all breaks are just plug and play. When you install these make sure the surfaces are clean. I usually run very fine sandpaper like 400 grit over the brake pads prior to installation. With the rotors I will make sure they are clean with brake cleaner. I also installed all new calipers at the same time and I drove the truck with no load for about 100 miles. I also drove the truck up to 70 mph and then made a few abrupt stops. Basically the metal has to heat up and cool down several times and these things will never give you an issue. These perform extremely well they are very durable and this is definitely good quality. They do make a little bit more noise than Factory but that is typical of drilled and slotted rotors. These definitely fit my truck so I would say the accuracy of the system is perfect. Installation with these is easy. Again I would highly recommend that you run a break-in. And I would highly recommend that you replace all the calipers at the same time.

My 2005 4Runner Sport OEM brakes were still ok, just a little worn and some surface rust. Being that these a zink plated, I think they'll stay looking good for a long time. I saw that a lot of reviewers got the wrong size, so you need to know that before ordering. I didn't use the brake pads that came with it, I cleaned my barely used Akebono pads. There's always a little noise when you install new brake parts, but they're perfect and quiet after just a few miles. The drilled and slotted rotors look great and no doubt they'll perform better.

Super easy to install. Everything fit perfect. Great quit for the price. Breaks work amazing. Look very good on Cruze limited wheels. No noise and no dust.

Everything was great... nice stuff... and if you have any issue with your order they will do anything they can to solved the problem thanks again :-)

Perfect fit for the honda civic FG2 works like a charm brakes are quiet but not super strong might go for an upgraded pad but the rotors phenomenal looks aggressive and no issues