Epoxy Resin, Demorex Resin Kit Crystal Clear-Not Yellowing and No Bubble Self Leveling Easy Mix 1:1 Casting & Coating for DIY Jewelry Making, Art Crafts, Wood & Resin Molds (32oz)

I love this brand and product. Very good quality, clarity is fanominal. Drying time is quick. I will purchase this over and over. Worth the money I spent. Love it!!!

Oh My Gosh! This Resin advertised, No Bubbles, Crystal Clear, Well let me tell you, the certainly followed through with both of those promises! I think I'm in love with this Demorex Resin! I have to admit I was a bit nervous when I opened the box & saw instructions for UV Resin! Lol but the mixing ratios and times as well as cure times are on the back of the box & each bottle. So far so good! Not a single bubble coating 12 tiles, was the easiest time I've had ever doing resin, fingers crossed it looks as beautiful tomorrow as it did tonight! (Will post an update) Thank you Demorex for such an easy time with your resib tonight. I was about to stop resin for ever! Now I don't have to! 😉 Based on everything so far, I would definitely recommend this product!

This no fumes resin & hardener works great. Just be sure to mix it thoroughly to avoid sticky spots. Dried crystal clear with no bubbles. Be sure your pouring it on a very level surface to avoid uneven finished surfaces. Met all my expectations.

This resin is super simple to mix, but for me, set up too slow. It's a 24 - 48 hour cure. If you demold before that, it will run

Great value for the price. Good amount for small, medium, and large projects. Pours and sets in molds beautifully. Takes pigment powder well and dries crystal clear, unless pigment powder added.

Main reason I bought this was I needed an epoxy that was food safe. The price beats any other brand on the market that I came across. The fact it was an entire kit and not just the mixture was a bonus. The stirring stick cleans up easily with a little soap and water, no more wasting popsicle sticks. I did a deep pour of about 2 inches but it was to fill gaps no more than 1/8". It's dry to the touch and not tacky after about a day but I plan to wait about a week before sanding it. It's hard but I think sanding it after only 1 day would result in gumming up the the sandpaper. I can't comment on the clarity as I tinted mine with black diamond mica powder. I put the two jugs in the sink with hot water to warm them up to lower the viscosity and make it easier to pour. That might've made it more prone to bubbles, but between using a heat gun and a propane torch, I'd say the torch gave better results at clearing up any bubbles.

I've used so many different types of epoxy from marine, to craft. I am used to the large project epoxy hardner being very thick so when I got this and opened it I was surprised how thin it was. I didnt really think it was going to work well. It did! So it mixed super easy cured over night and gave a super gloss shine the only downside is that it is very very thin. I used this over a previous epoxy table top as a clear gloss. It will probably need an additional 3 coats to give it an even finish. So if you are using it for medium sized projects and not just for jewelry making or small crafts this probably isnt the greatest value for your money due to how much you need to use. Overall though it was a decent product and I would buy it again

I have a mix results from this product. Some of my casting dried fine, others remain sticky for days even when following instructions; also used a heat machine. Most of the castings remain sticky. Hoping that i can fix them with another epoxy brand. Price was fine, clarity was good

Works well. Hardens over a 24h period to a crystal clear hard coating.

This epoxy kit was fairly easy to use. Just mix by volume half epoxy and half hardner in dollar store disposable plastic beer cups. No mechanical mixing required, I mixed by hand for 3-5 minutes per batch and had ZERO ISSUES. Don't panic over bubbles. Once poured, leave it for about a half hour and use a heat gun()hair dryer should work too, just take longer maybe) to dissipate them. Dried nice, hard, and sandable. I had to sand down mine and when done, wiped it down with a cheesecloth and spray some Matte clear coar(use gloss if you want shine) the sanding scratches disappear and you are left with a crystal clear finish

If used as directed it works great. I had no issues with bubbles without using a heat source. Will buy again for some other projects

totally understanding company and did send a free replacement as i wasn't satisfied with first batch

Fantastic to work with. Tried different ones and this is the best.