Outdoor Grill Prep Table & Serving Cart, Stainless Steel Top, Unity, 40 Gal, Brown - Portable Bar Table and Cooking Accessory for Pool, Patio, Lawn, and Backyard

I had been looking for a way to store my Lodge Sportsman's Grill outside on my balcony without having the cast iron develop rust. Also, I needed a platform of some kind to set the LSG on to grill at a comfortable height. I stumbled upon the Keter Unity while looking for a weathertight plastic storage box. I highly recommend it for any LSG owner who doesn't have a patio or a big backyard for grilling. Even though the LSG gets very hot, the stainless top can take it and the plastic supports never even get warm.The first thing I did before starting assembly was to check the stainless steel top, given the bad experiences people here have had. Everything inside was undamaged, so I started the assembly. I highly recommend that you do that first because pulling the parts apart again looks like no easy task.I took my time to carefully assemble it using the pictogram instructions and it was easily accomplished in about 45 minutes. Most of the pieces just snap together snugly, but there are a few screws in awkward places to get at. I double checked the matching part numbers and the pictures before snapping the parts together, to avoid the hassle of trying to get them apart again.The cart is the perfect size for my balcony and it easily rolls out of the way when I'm not using it without taking up a lot of real estate. The door closes tightly enough to keep out even wind-driven rain and I have had no rust problems on the cast iron grill.I like the hooks that are provided to hang brushes, tongs and even the included bottle opener on. The top is very thin stainless and scratches very easily. I put a cork mat down now to place the grill on when I'm using it. The steel top has been rained on and so far it hasn't tarnished or rusted. It cleans up very easily with a little spritz of vinegar and a soft cloth.I couldn't be happier with my purchase and highly recommend the Keter Unity BBQ cart for anyone that has limited space to enjoy grilling out.

So happy to have purchased this. I know some reviews have said theirs arrived damaged or was difficult to put together, but that was not my experience. All pieces were intact and there was no damage. It took maybe 30 minutes for me to put this together by myself.My advice is to go slow, analyze the directions carefully, check and double check that you’ve picked up the right piece (everything is labeled in the directions and on the actual piece) and that you are installing it correctly. The pieces fit together easily—nothing had to be forced during assembly.So far, I’m finding this to be a fantastic addition to the back porch next to the grill. The stainless steel top looks nice and is fantastic for extra prep when grilling. Love having the paper towel roll mounted on this for easy cleanup. I’m able to hang grilling utensils from the hooks that were included with the cart—now my tongs and grill brush have a permanent home. The cabinet is great for storing bags of wood chips and other grilling accessories, but it’s large enough to hold an extra propane tank for your grill if you have a backup.My back porch is covered, so I can’t speak to how well it’ll hold up if out in the sun and rain all day. But, I can say I’m very glad to have purchased this.Pros: looks good, easy to assemble, nice designCons: the door can be installed on either side and can open either direction, so make sure you know how you want it because it’s hard to get the door off if you want to rearrange it

First, the table turned out perfect for what we needed. But . . . several pieces came broken. We had already put several pieces together before we saw that the leg for the wheeled foot was missing a big chunk of the plastic. The same was true of the rear wall (missing a chunk of plastic that attaches to the base). There were no pieces of broken plastic in the box, so these pieces were put in the box broken. We are able to put both to the rear and we don't move it around so it's okay. The stainless steel top is marred by the plastic coating that was "protecting" it, but I can't get the marks off. This is a sturdy, outside table and, for us, is the perfect size with the right size cabinet. This only took my husband and I about 1/2 an hour to put together.

I ordered this even though it seems some people had some problems with it. First of all IT IS MADE FROM PLASTIC PEOPLE!!! So expect a little warping. Now that that is out of the way. The box arrived on time and in good condition. The contents were well packed and complete. After I inventoried all the parts I began the assembly. The instructions were clear and straight forward although only pictures no written instructions but the assembly is so simple you really only need pictures. There was a small problem though. The very first step has you attach the "Hinge" pieces to the side frames. There are obvious screw holes in the parts but the instructions do not tell you to attach them with screws. I really don't think it would matter but the holes and screws are there so I put them in. As I said above I expected and got a little warping there was not so much that the parts would not go together though. and once assembled everything was square and well fitted, NO GAPS. It took about an hour to assemble by my self (I am 68 yrs old). The cabinet is sturdy and well made and it looks good out on my balcony. I would buy this again and recommend it to others.

I needed a good work surface next to my Traeger BBQ smoker, and it had to fit in the limited area I've got on our deck. Dimensionally, this Keter Unity Portable Outdoor Table and Storage Cabinet was near perfect!ASSEMBLY: There are a lot of negative comments on assembly. Mine was a snap - literally. My unit arrived in perfect condition, it was well-packaged. I was actually a bit surprised at how heavy and substantial the plastic was compared to other KD plastic storage units I've had in the past. The pictogram assembly instructions were well-thought out, but required thoughtful review at each step. The unit appeared to be very well engineered -- all the pieces fit together snugly and exactly as they were intended. The stainless steel top is fairly substantial as well. I decided to leave off the paper towel holder as I didn't need it, nor had space for it where the unit would be placed. Overall, assembly took about 20 minutes or so.OPERATION/USE: Love it! It fits perfectly next to the BBQ and provides a good working space for Q'ing and dry storage for bags of pellets. I've found I can store several 20 lb. bags of pellets with no problem in the storage area, and the unit will still allow me to roll it and move it if needed.TIP: I purchased the Unicook Electric Smoker Cover, 28" W x 22" D x 39" H to cover the unit. I had to trim and hem about 5" off of the bottom so that it wouldn't hit the floor, but otherwise it's a near-perfect fit.RECOMMENDATION: Keter did a fine job on this unit. The only thing I would recommend would be to provide cover plates of sorts to cover the holes left when not installing the towel holder.

I needed a compact work surface next to my Weber Q1000 and Traeger smoker, and this Keter Unity Table fit perfectly in my limited deck space.Assembly:Despite some negative reviews, assembly was a breeze—about 90% of the parts snap into place. Mine arrived in perfect condition, and setup took around 30 minutes. The pictogram instructions were clear but require attention to detail. Everything fit together snugly, and the stainless steel top feels solid.Use:It’s sturdy, easy to move, and stores all my BBQ essentials, including pellets. A great combo of workspace and storage.Tip:I purchased the Unicook Electric Smoker Cover (28" W x 22" D x 39" H) to protect it. It even fits over my Weber Q1000 (with its own bonnet cover on) perfectly.

Directions are pictures only. Assembly took me over an hour. One of the side panels does not fit properly causing the front and back panel to be crooked and it has a gap. I feel like for all the work to put together it’s definitely not worth $200. Right now I’m trying to work out the problem with Keter, the manufacturer.

I found this super easy to put together... and I'm a female in my mid-60s. It's just like a puzzle, snap together parts. Just be careful to follow the order of the assembly. They designed steps in that order for a reason I found. I tried to shortcut and do both ends at same time, and then found the following step, if I HAD FOLLOWED THE DIRECTIONS, fit very neatly, to secure the previous piece.All of the pieces ARE labeled... you just have to look inside each piece... it is brown on brown, but the letters and numbers are large. I did not even need my glasses. The directions... each step... shows exactly which piece is needed for that step, the number of pieces, and which hardware to use on that step.No, it isn't all written out. But I actually found the pictures and diagrams easier... just find the correct peiece for that step... turn it till it matches the orientation of the step in the picture... and snap together.Also.. I'm fairly strong but I have arthritis in my hands so I was concerned about being able to snap in each piece... so I left all the pieces on an outside table in direct sun and waited a few hours... and the pieces were super easy to snap together. They also tell you which direction to set the table, (what orientation) and using a towel on the pool deck to protect the surface... and that made it even easier... pushing down on something is so much easier than trying to push in from the side or from underneath.This was a piece of cake... even with a glass of wine... I would order from this company again in a heartbeat. I was impressed with how it was engineered, the design.Note: I have a cover for my Weber grill only... so far I have not covered the cart itself, and it stays outdoors, next to my screened room, and beside the pool. But I do not keep anything inside the cabinet that cannot get wet. My charcoal I store inside and the starter cubes. I do keep the Weber charcoal chimney inside the cabinet.

I absolutely love this outdoor station. I live in a condo, so with little space and no room for a full-size BBQ, I wanted something to put my small portable BBQ on, have a shelf and some storage. At first I was a little reluctant to order this due to a couple of reviews (warped back panel, pieces not fitting together). However, I’m glad I did as it’s now one of my favourite outdoor piece. All the parts were in the box and all was good. I found assembly easy - assembled alone and took maybe 40 minutes. The key is to follow the instructions as there are a few pieces that could easily be reversed, in which case they wouldn’t fit. But if you figure out the coupld of tricks, everything will snap nicely into place, making it a very sturdy unit. The hooks are nice for hanging the BBQ brush or a towel. The little shelf on the side is nice for putting down utensils and the like. I use the shelf to have my plate and things while BBQing, and use the storage compartment for some gardening items. It keeps everything nice and tidy. The stainless steel is of a lighter grade (though still totally adequate for outdoor use). In order to protect it a bit more, I have simply placed a brown wood-look placemat under the BBQ. Wipe down with just a damp cloth. I’ve only had it for just under two months so can’t comment on long-term durability, but am quite confident that it will hold up nicely to our Canadian winters. I would definitely recommend this product.

Item as described and easy to assemble. Would get 5 stars but small amount of tomato sauce left unattended for an hour created a lasting mark on the stainless top. It's for outdoor use so we don't expect it to be perfect.

I was able to keep everything for my barbecue at my finger tips. I was impressed with the stainless steel top. After food preparation it was easy to clean and in my opinion this kept the surface free of bacteria.

Great stand, had it for a couple months and it has done the trick. Great for a small BBQ and the propane tank fits perfect underneath.

Took several hours to assemble...no fun! We have a brand new stainless table top bbq....this new table is one inch too short, or small...the legs of the bbq are actually hanging over half inch on each side of the table...it’s actuallbunstable tomise as a bbq stand....but will make a great side table with storage