QWORK® 35mm Tap Cartridge, Ceramic Faucet Cartridge, Ceramic Disc Cartridg Valve, Mix Tap Inner Cartridge Replacement for Kitchen Faucet, with Cartridge Base

Perfect fit as replacement for old cartridge in a 20 year old Crosswater monoblock vanity basin tap. Useful tip - add a dab of silicone grease to keep the two rubber o-rings in place while you place the new cartridge in position. If they drop off while installing your tap will leak. Did the job in 20 minutes and now tap is as good as new. Excellent value.

My tap was dripping for months, when I opened it the cartridge just fell apart - it came out in pieces when pulling from above. This product from amazon was the perfect fit, and great quality as well. I replaced my old one with this new one and the tap isn't dripping anymore and is lot smoother to use!.Highly recommend this product. Just make sure you order the right size, there is also a 35mm one, I needed the 40mm one.

Couldn't find this size locally at plumbers merchants. I fits perfectly. Hopefully it will work okay.

Exactly as described "what it says on the tin". Delivered the next day. Great stuff.

Who've thought that the main outlets like Screwfix, Toolstation and others didn't stock this item for a 16yr old tap.China to the rescue via Amazon!Simple to fit and works fine! Ordered two more in case the same model tap goes in other rooms.

Quick replacement for our basin tap, perfect

I went to several local plumbers merchants who didn't stock the part and told me to get a new tap and avoid ordering online. Ordered this one, arrived, I swapped out the old one and it's worked perfectly.

This ceramic tap mixer cartridge (QWork 35mm tap cartridge) replaced an old kerox k35 one. It looks to be reasonably well made. Tip when fitting: make sure that the cartridge is seated correctly in place, and then make sure that the brass nut that holds it in place is firmly screwed in. Use your judgment here. If it isn’t screwed in tight enough, the faucet will leak, but if you over tighten it, you run the risk of damaging your faucet. So err on the side of caution. If in doubt, tighten until it doesn’t leak. There are zero instructions supplied. So make sure you remember how it fitted, although it’s pretty straightforward if you’re good at these kinds of things. Tip number two: make sure that the whole of the old cartridge is removed. Mine broke in half and as I had never done this before, for a while I thought that the cartridge had been removed, when the bottom half was still in the faucet hole, and hence the new cartridge wouldn’t fit!! Go slow, take your time, turn off the water (of course) and you’ll be fine. I was advised to apply a little smear of plumbers grease on the o-rings and the body of the cartridge to make it easier to remove next time, so I did that. I will revisit this review in a few months or so to let you know if the cartridge is still working ok.So far so good!

Hola a todos!Este cartucho para un grifo monomando, en mi caso adquirí el de 40mm, ha sido el remplazo perfecto para el que tenía y llevaba unas semanas perdiendo agua.Tanto las características aportadas por el fabricante como el envío has sido acordes a lo escrito. Todo estaba en perfecto estado (bueno, el paquete me llegó un poco deteriorado, pero no afectó en nada al recambio).A la hora de colocarlo en el grifo, dos consejos:1- Poner un poco de vaselina en las juntas de goma, para que sellen perfectamente2- Asentar el cartucho bien, buscando que encaje en los agujeros que tiene el grifoUna vez hecho esto, todo ha ido genial.Gracias!

Prima onderdeel. Snel geleverd en past perfect. Ik ben blij

Kan användas som ersättning för många Mora-produkter - t.ex. Mora Cera eller Izzy. För mig var det att byta ut patronen till Mora Cera High Standard köksblandare, dvs. Mora 708498.AE - kostnaden för QWORK är mycket lägre, ungefär 1/3 av priset för originalet (som kostar cirka 300 kr).Can be used as a replacement for many Mora products - e.g. Mora Cera or Izzy. For me it was to replace cartridge in Mora Cera High Standard köksblandare, i.e. Mora 708498.AE - the cost for QWORK is much lower, about 1/3 the price of the original (the original costs about 300 SEK).

Fonctionne a merveille

Buon prodotto .Ha fatto ciò che ci interessava.Montato semplicemente