MOUNTUP Dual Monitor Stand - Freestanding & Height Adjustable Monitor Desk Mount, Steady VESA Mount Holds Max 17.6 lbs, Computer Monitor Stand for 2 Screens up to 27 inches, For Home Office

I am very satisfied with this MOUNTUP single monitor stand. It is very sturdy and holds my monitor securely without any wobble, giving me full confidence in its stability. The adjustability is one of the best features. I can easily change the height, tilt, swivel, and rotation to find the perfect viewing angle, which has greatly improved my comfort while working for long hours. The installation process was simple and straightforward, and the base is solid enough to keep everything stable on my desk. It also helps free up valuable desk space, making my setup look much cleaner and more organized. Overall, this is a great quality monitor stand that delivers excellent performance and value. Highly recommended for home office or gaming setups!

I had previously purchased six of these for a community center and now I have them in my home to clean up my multimonitor layout. They are hard to adjust the first time, but they hold position well and are sturdy. I have V7 monitors and I will advise you that the mount may not work well with this manufacturer. The power and video inputs are close to the VESA mount. The good news is that the base can be swiveled to help open up space for cables. But one of my monitors has the inputs positioned directly under the mount plate and for that one, I had to fashion rails to extend the mount several inches away. There is another important point. These mounts have the most height, almost 18 inches. If you want to open your desk space and keep your back and neck straight, you will appreciate the height.

Arrived quickly, easy to set up in a few minutes, solid, no issues. Holds my dual 25" monitors just fine. Comes with all tools needed (5mm, 6mm, 7mm Allen keys, one with a Philips-style end for screws, plus spacers for the butterfly bracket, if needed.) The post cable guide also has slots to hold all 3 of those wrenches; so you'll still have them handy if/when you need to make adjustments or take it apart. You might need help when attaching the monitors, so it doesn't fall over. I did it all myself with no issue, however; I just laid out the monitors on the carpet. The brackets simply slide together, tightly; a tiny retainer screw on each provides extra insurance that they won't slide off if, say, being moved across the room or to a different office. (If traveling a distance or by vehicle, I would probably release the monitors from the stand.) I might have preferred the clamp-on style, but my desk is too thick for that option. This is plenty sturdy, however, (unless you have, say, a toddler that wants to hang on one end). But for other reviewers who claimed it wasn't strong enough to hold their monitors, I don't know what they did wrong...? A couple things to mention, and this may be universal across all monitor stands. I'm a bit OCD and I really really like my dual monitors to butt up against each other perfectly. That's annoyingly hard to do, I'm always a few mm off. (Ok, I just had to mess with it, and now the bottom corners are a full cm off). Thinking about getting a couple 4-inch Velcro strips to put on the back and hold them exactly where I want. Also, in order to get them close, the "elbows" of the arms must bend and stick out 2"-3" backwards towards the wall (or in my current case, wood blinds). If you have smaller monitors, it could easily be twice that far. Only matters if you're crunched for space.

Is good to set up , but would be good if they add measures on tube to know which height is at. Same with rotation its for +30 to -30 which is hard to know if its 10degres as standard.Product is fine but ,I would like a company to make a motorized monitor to adjust all rotation , height more freely

Does what it should, fairly easy to assemble. Holds my 2 24” monitors and has a little opening on the stand for my cell phone.

This has worked fine for me with a 27 inch monitor in vertical position. The stand that came with the monitor didn't support vertical, so I bought this and it has worked fine for several months.

I bought this thinking that it would drop my monitor to the bottom with out any real support from the stand other than it holding it up. The reason why I say this is because I'm using an armoire and the monitor I had bought was to tall with the stand to fit inside and the only stand that could slide all the way down and give me control was this one and maybe one other. This stand says it can only support up to 13" to 32" and 17.6lbs. The monitor I had bought is 40" wide and 28 pounds. It is working with out a problem I even tried to push down on it to see if it would drop down and it did not. It's very strong and even the tilt holds up nicely you just have to make sure you tighten it enough to hold the monitor. I've read reviews that say it doesn't support a normal monitor with in the specs and they show proof of misalignment of the screws used for the base. I didn't have this issue so it would seem this was an issue before but now it's fixed? If so the company should really put something up saying so but that's just my two cents worth.

Mounted a pretty light monitor on the stand. It worked well vertically, and horizontally. Was sturdy, and no way the monitor was going to tip over. The only flaw, is with the tilt mechanism. The monitor can tilt down, or up. The issue is, the bolt that runs through the mechanism to the nut on the other side does not have any method to secure the monitor from flopping down other than brute force. No lockwasher, no star washer, no double bolt. Just flat painted metal against flat painted metal. To stop the monitor from flopping down, I had to use a screwdriver handle, and insert the included allen wrench into it, have a friend hold the monitor at the angle I wanted, and literally put 200 lbs of weight on the screw to get it tight enough to hold the monitor from flopping down. At some point, I am going to modify that section by drilling a small hole through both parts, and using a lock pin to prevent it from slipping.

Very nice, rigid and stable. Separate height adjustments window is small (alignment screws).

This works Great! Love it!

Works best for light monitors, sometimes it tilts down. Overall very good product.

Excelente calidad de materiales, súper sencillo de armar. Lo tengo con dos monitores de 22’’ —de diferentes marcas y uno más pesado que el otro—y no se tambalea. No es apto para escritorios pequeños, la base es bastante amplia.

Compre esta base ya que la que mi monitor Xzeal XZ3010 estaba muy inclinada al frente y me impedía ver bien; me llego un día después de a verla pedido, lo que me sorprendió porque creí que se tardaría al menos dos días en llegar, los materiales de todas las piezas se sienten de calidad y es fácil de ensamblar, la base me roba algo de espacio en el escritorio, pero no es un gran problema.