LED Driver 12V DC IP67 15W Mini 12V Transformer 1.25A 2-Pack | 240V to 12V Transformer, Compact Size, Constant Voltage Power Supply for G4 MR16 Strip Lights & Landscape Lights

Perfect, my LED is working again.

These compact LED drivers/transformers seem ideal to convert a halogen "Serious Readers" ASK lamp to accommodate a low energy LED bulb. It will operate on the foot switch, not the small black switch at the top. To change over, simply unscrew the base (4 screws with rubber feet), and remove the existing transformer in the base of the lamp, disconnecting it from the connectors. The new driver's wires simply go into the existing connectors: The 12v red and black output wires connect to the two silver wires that go up the stem of the lamp - I put the red live on the end. (The other two existing black wires in that connector can be left securely fastened and blank.) The 240v input of course goes into the connector with the mains cable, brown to brown, and blue to blue. Leave the earth cables as they are. Check all your cables are secure. Push the new transformer up into the base, just like the old one was, with the two connectors either side, to stay separate. Put the base back on, and that's it! (The bulb is size MR16, and you ideally need a 4w lamp, equivalent to an old 40w bulb, and warm ish at 3000 (or 4000) temp, with CRI 80+.)

Used a couple of these to replace some 20-60w halogen transformers inside some wall lights as the 3x 2w bulbs were flickering and making a horrible noise. Nice and small, was simple to replace but the lights now have a delay between turning on and off. Not the end of the world for me but something to bear in mind.

I used this for hard-wiring in an Aqara video doorbell. Not much to say except it worked flawlessly, and was able to fit into a back-box the other side of the wall. Been running fine for several months now, would recommend.

Bought it to replace the provided power adaptors for my Tapo c325wb cameras. They work great with them and as a bonus they make hardwiring the cameras ridiculously easy!

Excellent replacement SMPS for the faulty unit that was fitted to the light fitting. It works very well with LED bulbs.

Very Good Driver

Bought as a direct replacement to one that went pop in our kitchen. Piece of cake to fit as I already had the junction boxes in place.

Bought to connect directly the WiFi directly to the hard wiring in the junction box and it works.

Hade halogenlampor som ständigt gick sönder. Tröttande och köpte dessa samt motsvarande ledlampor. Fungerade smärtfritt att byta och är väldigt nöjd

Ist seit längerem im Einsatz und läuft tadellos seitdem. Hatte mit weniger gerechnet.

Ce transfo m'a effectivement permis d'alimenter un ruban led. Reste à voir comment il tiendra dans le temps, à chauffer coincé dans le boîtier sans possibilité de se ventiler...

I needed a transformer / driver to convert AC wall power supply to a DC output for a 12v LED COB strip. I combined this little transformer with a 6000K lightstrip which is designed to be cut (which I did to about 6.5ft or just over 2M length). I used the light strip shown here: https://www.amazon.ca/dp/B09Z2PDHRJ?ref=ppx_yo2ov_dt_b_product_details&th=1 I also needed to strip wires back on both products and also ensure that L/N and +/- connections were in the right order; safety first - don't forget to switch off the breaker before installing and use plastic end caps plus electrical tape to secure connections - but it worked and I'm happy with this. My project was to replaced the driver and the LED backlighting on a mirror, and this did the trick. My only regret is not having gotten the two pack; this little driver is handy and it took me so long to identify the compatible pieces, so I should have bought two.