Discovery Products Carbon Off Cleaner (19-Ounce Can)

This cleaner clean most dirty things ,what ohter cleaner can’t clean well. Especially frying pan. So functionally works with dirty stove, glass stove. Easy of use. Spray foaming effect.

Since the election vote count will be going on for another month, I decided to take a break and clean the baked on varnish from several stainless steel cooking pans. The results are amazing. See the accompanying pictures. I rarely get excited about a product but this product, “Carbon Off”, is one that got my attention. I have tried a number of products that claim to loosen the baked on Carbon (varnish). Almost all of these other products required a lot of elbow grease, and they required multiple applications. Because I was so disappointed with these other products, I had said to my wife, Jo, that we should do basic research and find a chemical that would loosen the bonds between the baked-on carbon and the metal of the frying pan. After some 'YouTube' and Internet research, I purchased a spray on version of “Carbon Off” from Amazon. It is a spray on gel that loosens the carbon that has been baked on the pan. I followed the directions, spraying the “Carbon Off” product onto a medium sized stainless steel fry pan. I tested it after it had set for 30 minutes by pushing the gel around with a stick. The carbon was loosened. I decided to let it stay on overnight, and I also sprayed the product on to two other larger cooking pans. The next morning I rinsed off the “Carbon Off” gel, and I cleaned the pans with a scotch bright pad. I used a toothpick to poke the gel and gunk out of the crevices. The carbon / varnish came off with very little elbow grease. The pans were very clean. I then used some metal polish to shine them up. I highly recommend using Carbon Off”

I have always struggled to get the oven door clean after self-cleaning the oven overnight. I suppose I should have cleaned the glass first before the self-cleaning but I didn't know. This sticky stuff turned black and absolutely not moving with a magic eraser, "Krud Kutter" and a plastic scraper. When I first got the ovens installed, I used a sponge with a scratchy surface and scratched the glass accidentally. They replaced the glass and warned me not to use anything abrasive. So a few years later, frustrated with all the gunk on the windows after the holidays, I tried again to clean them and tried this Carbon Off and voila! It worked like a charm! Stunk like anything, and had to ventilate the kitchen. Only left it on for about an hour before it wiped right off! I wish I took photos! I wasn't sure it would work. It does! Amazing, and thanks for making this potent stuff! I'm going to buy more for the grill! Whee!

Absolutely cleans metals. I figured it was another kitchen cleaning product that was like fine and would do a passable job. it is EXTREMELY powerful and will BURN you if you accidentally touch it after it sets for a minute or two. Glasses are absolutely essential and I'd have gloves for it. I used this on a popcorn machine that we stopped using at work which probably hadn't been cleaned in years. It has a metal kettle and metal floor. It came in contact with some clear plastic which is ruined now because it burned it hard. That's my fault as it clearly says not to use it on plastic. The kettle is better than new and the floor is spotless. I then used it on my grill which also worked amazingly well. Probably the cleanest it's ever been. Just wash THOROUGHLY afterwards. I can't imagine what this stuff would do if it got inside you.

This stuff is amazing. I cleaned my 35 year of magnalite pots to look like new.

Expensive and does not work as shown. My stainless pots had some normal deposits on bottoms .Some carbon came off needed a second application and steel wool to get final amount off ,Better off with steel woll and elbo grease .

Stop using other products immediately if you’re trying to clean the carbon from your exhaust and use this. This works fast and easy to remove carbon build up from my car’s exhaust. I just spray it on wait about a minute and wipe off easily. After researching online and watching several YT videos every product I used I would still end up using a scotch pad or wire brush which would just scratch my exhaust. No longer with this. NOTE: make sure to avoid getting any of the product on you. Wear PPE (gloves, eye pro) and even a mask because this stuff is strong. Also, I had a harder time removing the carbon in sections I already tried cleaning with other products. My guess is I compacted the carbon so it became more difficult to remove and I still had to use a pad. But in places I didn’t touch the carbon wiped off easily with a shop towel.

I purchased this to clean years of carbon build-up on my iron skillet. I followed all the directions carefully, using extra precaution with goggles, gloves and a large bucket of fresh water near by. All work was done outdoors, where fumes could easily dissipate. This will definitely work, but it takes considerable time. Plan on spraying it on thick and letting it sit someplace safe overnight (I locked the skillet in my shed overnight to prevent any critters from being injured). While a significant amount of carbon did come off there's still about 40% left after two treatments. Possibly the gel-based formula would penetrate better. For reference, the MSDS sheet for Carbon-Off lists the following components, all of which are toxic and dangerous to various degrees. KNOW WHAT YOU ARE DOING WHEN YOU USE THIS! Chemical Name/Common Name: CAS No. PEL TLV *METHYL ALCOHOL 67-56-1 200 PPM 200 PPM *DICHLOROMETHANE 75-09-2 TWA 500 PPM 25 PPM *AROMATIC HYDROCARBON 108-88-3 TWA OF 100 PPM (375 mg/m3) TWA OF 50 PPM (147 mg/m3) ETHANOL 64-17-5 1000 PPM 1000 PPM ETHANOL, 2-BUTOXY 111-76-2 25 PPM 25 PPM AMMONIUM HYDROXIDE 7664-41-7 50 PPM 35 PPM