DuraSteel 30x48 Stainless Steel Work Table - NSF Certified Commercial Prep Table w/Adjustable Under Shelf - Kitchen Island, Outdoor Grill Stand, Laundry Folding & Garage Workbench - 350 lb Capacity

This is a very sturdy, high quality table, easy to assemble and a great price for a commercial stainless steel table. i purchased to use for a kiln stand it is is amazing for my use, but would be great for a pizza oven or food prep. It is well packaged and easy to clean! It is a great purchase!

I usually never bother adding photos to my reviews, but in this case I needed a secondary counter precisely 12 inches wide to fit a very specific spot in my kitchen, and I am extremely impressed with how precise this table’s measurements are. They aren’t kidding: the 12x24 is indeed 12x24! As you can see, the table fits exactly where I needed it to, with maybe a quarter of an inch of clearance on the sides. Perfect! Also, I can confirm that at least as of March 2026, the company has apparently fixed the issue in older reviews of narrow legs. A label on my table says it was manufactured in 2025. The table feels very sturdy, the legs are appropriately spaced, and the adjustable shelf underneath is now about 9 inches wide, which is enough to be usable. I appreciate any company that actually listens to its customers and makes design improvements.

This table is sturdy and is as advertised. I had to return a table to HDepot that was so flimsy and wobbly. So glad I went with this Durasteel table. My son-in-law said he knew they were good quality. Glad I listened to him.

Updated Review: Replacement hardware arrived within a week. I purchased the 12” wide model to use as a “filler table” between our stove and base cabinet/countertop to provide an additional work surface and some storage space (our home was built in 1927 and and the stove area is 12” wider than modern stoves). The table is sturdy and completely suitable for the intended purpose. The packaging was severely battered and torn, thus the hardware getting lost somewhere along the way. The packing box barely protected the small table during shipment. There were minimal scratches but no obvious dents to the table top or shelf. If the same packaging is used for larger tables, I can understand why people who have purchased larger models have had issues with damage. Regarding the 12” table: I would be hesitant to have it free-standing or not secured to a wall while using any heavier appliances like stand mixers, etc., on the top. A 12” wide table does have limitations! The manufacturer apparently changed the design slightly and moved the legs closer to the outer edge on the 12” wide verson, so the table is quite sturdy, especially for a table almost 3 times taller than it is wide! Very narrow tables like this one are designed to fill in gaps between other tables and/or appliances in a professional kitchen - not stand alone. I am quite pleased with the table, and appreciate the prompt response of the seller to replace the MIA hardware! > One note regarding the image displayed on the listing for the 12” wide table: the spacing between the legs on the narrow ends of the table where the shelf is supported is 7” wide, which not only gives the table greater stability, but also allows adequate access to the shelf for storing items. Initial review ... The table arrived with NO Allen screws or Allen wrench to assemble the table!!!!! I needed the table the day it arrived, but now I have to try and find Allen screws that fit it locally?!?!? Not a happy customer!!!!!

Perfect size and very sturdy

The unit is an INDOOR DuraSteel 18 in x 30 in SS top kitchen work mini island with casters. Kitchen is tight, so I needed an extra work surface and more storage. With the purchase of an extra DuraSteel shelf I was able to stably support/wedge in the added VEVOR SS 2-drawer unit. No hardware required. The unit specs are 17.8" W x 20.2" H x 12.2" D. It still left me the bottom (original) shelf, for more storage. BTW, the extra DuraSteel shelf runs only $33/from "returns". The VEVOR unit does leave some back and side space unused - it is 12.7 in to the units' 18 in depth. Not a big deal. You will notice that I placed the VEVOR unit off center. That is because I plan to "close off" the end gap in some manner to slot in a wooden chopping block. The drawers slide in & out smoothly, because of ball bearing hardware. BTW, I feel that the 18 in x 30 in DuraSteel top dimensions are an absolute minimum for a functional area to perform most kitchen tasks. Also, wheels are a must in a small kitchen. The unit is topped off with a Winco CBWT-1830 Cutting Board, 18-Inch by 30-Inch by 1/2-Inch. It fits great but slides on top of the SS top surface. My solution: DIYMAG Neodymium "finger" magnets as seen in the pics (left). These are super strong yet can be removed. They do stick to this SS surface to contain movement of the board. *** Feb. 24, 2025. I just modified the unit by organizing the "empty" space below the table top [around the added VEVOR drawer unit] via 2 sets of DuraSteel OPEN Work Table BASE Bracing. This is not the intended use by the manufacturer. This move required me to take off the top. HINT: DO NOT over tighten the horizontal sections until all are installed and checked for level. Really paid off. On one side I safely store cutting boards. On another I hang basic kitchen gadgets with SS hooks. And the back cradles a long rolling pin...

Once again DuraSteel does it again. This is my 2nd stainless work table for a very specific reason and application. I was able to find the exact size I needed for my new HappyBuy 15qt. mixer. (See my review on that mixer). So here is a 130+lbs mixer on this stainless steel table and I couldn't have found a more stable and strong, durable work table. DuraSteel is a very common name throughout the world in commercial kitchens and on food prep stations. Easy to clean, sanitary and the little nook and crannies you typically find in other stainless steel tables are either, with specific design, NOT THERE or it's small places are easy to disinfect. The price is very reasonable for such a strong, excellent branded stainless steel table and in my case, the size was exactly what I needed. Very easy to assemble. I do, however, recommend that you use any brand THREAD LOCK on the set screws. There are 2 at each location and this is for added strength plus if you utilize either medium or strong strength thread lock during assembly. This will just ensure that peace of mind in situations like mine where there is a heavy mixer or any heavy tool that the table is intended for according to your needs. I had NOT ONE SINGLE scratch, dent or blemish that I keep reading about in other reviews. The stainless steel table came fully disassembled however, every single part was double wrapped and thoroughly protected by DuraSteel. Even the set-screws were separately packed in a plastic pouch and taped to the underside of the table for reliability to ensure they would arrive with the stainless steel table. A ALLEN WRENCH was also included, just to make sure you have a successful and full assembly of your DuraSteel stainless steel work force table. ***MEASUREMENTS*** Height - 34.25 inches Depth - 24 inches Width - 18 inches Note: The Width and depth measurements are of the very top finished part of the stainless steel table. Also, there are extra shelves you can purchase to add for storage and strength. Manufactured by DuraSteel. Very easy find on Amazon.com Easy clean with a half and half mix of white vinegar and warm water. This will leave no streaking or finger prints. There are also professional and commercial stainless steel cleaners and disinfectants. I hope this review will help you and I wish you a great day.

We use it as a microwave stand. It is sturdy and looks amazing in our new kitchen.

This table is NOT stainless steel! It’s a thin layer of metal covered MDF wood. It is not NSF and it’s not food grade. Don’t be fooled. Spend a little more for something real. The metal is so thin it bends easy and you’ll have a banged up table in no time. It already comes with defects it’s so cheaply made. Terrible.

Great sturdy product - very pleased with the table

Me parece que el precio es adecuado para la calidad del producto. Evidentemente me durará toda la vida. Lo recomiendo ampliamente.

Good value, and it’s a very good table we have our meat slicer on top of it which ways a lot! It was easy to put together!

Just big enough to do my pizza dough. Built really well