Frosted Window Privacy Film for Glass, Bathroom Window Static Cling Covering UV & Heat Blocking, Day and Night Door Privacy Frosting Film for Home Office, Pure, 17.5 x 78.7 Inches

I love this stuff and have used it on several windows over the years. It is a great inexpensive way to easily change up windows. This time I got the frosted version to help provide some privacy in a bathroom and on some garage windows.Product came in perfect condition and have seen other similar products where the the tubes are bent while shipping.As I mentioned I have put this type of film and several windows of the years and the frosted film works great for privacy. Plenty of light still comes through in the daytime. I tested it at night with all the lights on in the room. While standing outside looking in and one can only see rough heavily blurred shapes through the frosted film. So it works as expected and feel completely comfortable leaving the blinds open while taking a shower with this film on the window.I have had this film on other windows for over seven years and have yet to notice any discoloration, yellowing, or fading.Hanging is relatively easy but will provide some tips on what I have found as the best way to do it. First, two people are better than one. (Have hung this film on by myself before and it just takes longer and more of a hassle.)Second clean the side of the window where you are applying the film thorougly. I use Windex and then a wet towel to remove any remaining window cleaning chemicals in case they might react with the film and finally paper towels to dry it off. (I have only put the film on the inside of my windows and have not had an issue. Have no idea what happens if this film is placed on the outside of a window exposed to the elements.)Next and why two people make it easier than one is it is best to have one person hold the film up against the window and a second person cut a rough outline. As others have mentioned when cutting the film for the first time leave about an inch over and past the edge of the window pane and plan to trim it off later. (Never try to pre-measure and cut the film to fit the glass. I did my first two windows this way and each time miscut the film as windows can be slightly irregular or the line I cut was not straight and then you end up with gaping gaps along the edge of the film. It is always easier to cut away the excess with the film on the window.)After you have a rough cut outline add the soapy water and coat the glass completely. Any dry parts on the window are much harder to work with so soak the glass until until water is running down the pane. Also excess water will not damage the film in any way so you can’t hurt it with too much water.Then remove the backing and place the side where the backing had been up against the window. (Be careful that portions of the window, particularly at the top, don’t dry out while you are trying to get the backing off the film which can tricky. If they do just add more water to the window.) If the window is wet you can then move he film around slightly to get it in the right place.This next part is the hardest. Take a really sharp box cutter or exacto blade and cut along the edges of the window to remove the excess film. This takes some practice as the film can bunch up a bit as you pull the blade through it and make the cut irregular - a fresh sharp razor blade helps to prevent this. Also cut the film on the frame and not the glass. If the film is larger than the window glass and hanging over the edge onto the frame, the film tends to lift away from the glass at the edge and cutting directly onto the glass ends up with the film being about 1/8 inch too short and not flush up against the edge of the frame. Again this takes some practice and don’t expect your first window not to have some gaps between the film and the edge of the glass and the frame.Once the film is cut to the shape of the glass, then use a squeegee to push the bubbles and excess water to the edges. Be careful not to put too much pressure on the sharp corners of the squeegee as it can gouge the film.With two people, we did (10) rectangular 23 in x 66 in window panes in about two hours. I imagine if I had done it by myself it would have taken three or more hours.Again I love this product for frosted privacy glass. The finished product looks like regular frosted glass. Have not tried the more decorative films yet but will in the future.

The Window Privacy Film has transformed my living space, and it unquestionably deserves a 5-star review. This non-adhesive window cling is a remarkable solution for privacy, sun protection, and style, and here's why it's truly exceptional:Stylish Aesthetic: The standout feature of this privacy film is its elegant frosted glass appearance. It adds a touch of sophistication to my windows, enhancing the overall aesthetics of my home.Privacy Without Sacrificing Light: This film provides the perfect balance between privacy and natural light. It obscures the view from the outside while allowing ample sunlight to filter through, creating a bright and inviting atmosphere.Heat Blocking: The film's heat-blocking properties are impressive. It helps regulate the indoor temperature, keeping my space cooler during hot summer days and reducing the need for excessive air conditioning.Sun Resistance: Not only does this film block heat, but it also protects my furniture and belongings from the sun's harmful UV rays. It's a practical solution for preserving the longevity of my furnishings.Non-Adhesive and Easy to Apply: The non-adhesive design is a game-changer. It's easy to apply and can be repositioned as needed without leaving any sticky residue on the glass.Customizable Size: The film comes in a generous size, allowing for customization to fit various window sizes and shapes. It's a versatile solution for different areas of my home.Versatile Application: Whether it's in the bathroom, living room, office, or any other space, this privacy film is suitable for a wide range of applications. It enhances the functionality and comfort of any room.DIY Installation: The installation process is straightforward and ideal for a DIY enthusiast. It comes with clear instructions, making it hassle-free to achieve a professional look., the Window Privacy Film has exceeded my expectations in every aspect. Its stylish aesthetic, privacy without sacrificing light, heat-blocking capabilities, sun resistance, non-adhesive ease of application, customizable size, versatile application, and DIY-friendly installation make it a top-tier choice for those seeking an elegant solution for window privacy and sun protection. It has undoubtedly earned its 5-star rating and my wholehearted recommendation. If you're looking to enhance your home's privacy, protect against the sun's heat and UV rays, and add a touch of sophistication to your windows, don't hesitate to invest in this privacy film. It's a small investment with significant potential to transform your living space into a stylish and comfortable sanctuary!