HX HD Premium Heavy Duty Gaming Monitor Arm, Single Monitor Desk Mount – for 1000R Curved Ultrawide Monitors Up to 49 Inches, 28 to 42 lbs, VESA 75x75mm or 100x100mm – HD Pivot, Matte Black

I originally purchased a cheaper brand mount for my G9 and it did not go well. The install and removal were nothing short of a nightmare. I did not want to go through that experience again, so I decided to spend quite a bit more for the mount that came highly recommended. As soon as you pick this thing up, you can feel the difference in quality. The weight, mounting pieces, and the pivot made me feel like I wouldn't have anything to worry about trusting it with my monitor. Install was a bit tricky, but not because of the mount, but the desk I was using. It was narrow and the top is very thin. I originally tried drilling a hole due to my desk having a bar blocking the place where the clamp goes, but it stuck way too far out. I decided to buy a 2x4, cut it to size and making a channel that goes over the bar. This did the trick and created a great platform to clamp onto. The rest of the process was cake. The arm needed an adjustment to support the weight but the pivot, the pivot was perfect right out the box. Raising and lowering the monitor kept it level and never once did it drop. I wish this was a little cheaper but you get what you pay for. My only gripes would be with cable management and not being able to turn the arm more than 90 degrees left or right from the center position. This is just me nitpicking though because there really isn't much else to complain about.

I've always used monitor arms and have been content with cheap "no name" brands (Monoprice, Vivo, Wali, etc.) Recently I purchased a 49" Neo G9. Technically, it does not weigh *that* much (~26 lbs without stand), so I figured I'd give a Vivo premium a try. Although that arm claimed to support 30+ lbs and 49" monitors, it was barely useable. You couldn't make any real adjustments and the arm barely held the monitor up. It was floppy with slop everywhere. I purchased this Ergotron to replace it. The second I opened the box and started pulling parts out, the difference was night and day. Each Ergotron part feels solid. They are weighty and appear well designed. The most important part, to me, is the tilt mechanism. It uses a spring mechanism which is far superior to competitors rubber bushing tensioners. It handles the 49" Neo G9 with ease: it will hold it steady while also allowing easy direction of tilt. Assembly was remarkably easy...easier than competitors. The primary difference is the way the monitor mounts to the arm. Most competitors use a plate that slides into a groove and "locks" in place with a detent. This introduces flex which makes it feel less secure and makes it harder to adjust the monitor properly. In contrast, the Ergotron uses a vastly superior design with a solid metal connector that slots *and then bolts* together. It is both easy to connect (even with one person) and sturdier than the other design. I was hesitant to spend so much on a monitor arm, but it is well worth the 250% price premium here. While I think for sub 34" monitors the competitors can offer a good value, for large monitors, this can't be beat.

I just installed the Ergotron HX Desk Monitor Arm with HD Pivot and couldn't be happier. The thing is an absolute beast in terms of heavy duty build quality. It holds up my 33 lb. Samsung 49" super ultrawide monitor with ease. Installing the arm to the back of the monitor and securing it to the back left-hand corner of my desk was super straightforward. My monitor is now at eye level and the extra desk space is fantastic. The price is steep, but it's totally worth it. My only regret is not getting this monitor arm sooner.

This is the best arm I have ever owned and the most expensive as well. The product is made out of high quality metal and very sturdy. It can hold the Samsung Odyssey G9 with ease. If you have a monitor with a 1000R this is a must have. This monitor is heavy and curve just adds to it knocking the center of gravity off for the majority of arms. This will cause the tilt to not work correctly or not at all. I've researched a lot of arms before picking this because it was just a lot of money to spend. Finally I figured since I spent the money on a expensive monitor, I should do the same for the arm. There's nothing like worrying that you may come home and find out that your low quality arm has failed and your monitor is now broken because you wanted to save a few bucks. This arm provides piece of mind knowing that the company has a proven track record with quality made products. It comes with a 10 year warranty which is outstanding. Do yourself a favor and get the arm your monitor deserves, you wont regret it.

To begin with, this is obviously a very well built product with quality parts, as it would have to be to support a monitor like the G9 (as I'm using). Further, there's very little wiggle and it keeps its position very well. So kudos, it does the main job well. But... the price is exorbitant. A basic monitor arm costs literally one tenth the price, there's absolutely no way this requires ten times the materials or engineering, you are definitely paying for both the brand name and the fact that no one else (that I know of) makes a stand with this weight capacity. Supply and demand, I guess, but the stand that comes with the G9 is so excellent I really question if I made the right choice. Assembly is pretty straightforward, though if you have the G9 you will definitely want a second pair of hands actually lift it onto the mount. Adjustment in all directions works well enough but it really wants to move in some ways more than others. For example, it rotates (the one adjustment I never want to make) far too easily so I'm always leveling back out after moving it. And of the three main pivots, the middle one moves much more easily than the other two so actually moving it backwards and forwards it is a matter of swinging it side to side until you can get each pivot to move the way you want. It takes a good 30-60 seconds of wiggling just to push it back. Maybe this is unavoidable due to the monitor weight, but don't think this is something you can just adjust on a whim. Also, the depth adjustment is surprisingly short. I measured a measly 18cm of range - they advertise more, but that requires pushing it off to one side which isn't going to be a good option for most people. This is partly because the main pivot where it meets the desk is limited to 180 degrees from left to right, not ~360 as you might expect. It's puzzling because you can rotate it the full 360 by removing the set screw and it seems to operate just fine, but obviously that's risky to do without knowing why they limited it in the first place. If someone from Ergotron reads this, I'd love to know why it's limited and how dangerous it is to use without the screw. Finally, the cable management is, as always from Ergotron, hugely disappointing. I can't believe they still don't make this a priority. There's ways they route cables: first, two little velcro strips that are ugly, hard to close neatly, and tend to come out and are a huge headache to get back in. Worse, they don't even hide the cables! It's the cheapest, laziest solution imaginable. The other is a cavity on the rear arm that's covered by a plastic sheath. This at least looks nice once they're tucked in, though doing so is a pain and getting the plastic part on an off is rather tricky. I don't exaggerate when I say I've bought sub-$50 monitor arms with more elegant and thoughtful cable management solutions. Figure it out, Ergotron! I'm paying you way too much for this malarky!

1) This IS able to rotate 360 degrees at the base! I just want to put that first because of the huge amount of misinformation in the comments. There is a set screw you need to back off at the base. It's very easy to do and the only reason it exists is to prevent it from being knocked into a wall if the desk is flush. The other complaint I see is the fact the monitor rotates from landscape to portrait too easily. While this is true, there is a set screw that can be placed to prevent it from rotating in that way at all, which I'm assuming is 99% of people's preference, strange it isn't installed by default. 2) The quality of this thing is astounding. I was truly shocked as I removed it from the packaging. Is it $400 worth of quality? Hard to say. I know I'd have purchased it much sooner if it was $250 instead but I can't see how the material and built could be any better. They definitely don't cut corners. 3) This was very easy to set up. You WILL need to remove the monitor to make any adjustments to location or if you don't get the pieces seated properly, and obviously that is a task for 2 people. It can be a little unnerving but that's just the nature of dealing with something the size of a G9 or similar. I would buy this again, and I wouldn't wait as long as I did the first time.

A curved monitor, despite its listed weight of 25.6lbs / 11.61kg, may feel heavier due to the distribution of weight not being directly over the stand. The curvature of these monitors applies additional force to the mounting head, necessitating a sturdier tilting mechanism. To illustrate, holding a 5 lb. weight close to your chest feels lighter than holding it straight out, even though the weight remains the same. Similarly, the force exerted by the screen on the mount makes it feel significantly heavier at the mounting point. After experimenting with several monitor arms supposedly capable of supporting a Samsung 49" curved monitor, the truth emerged: their tilting heads would gradually wear out, causing the monitor to droop, or in my case, dangerously tip forward, requiring a swift rescue intervention (fortunately, I was present when it happened). Enter this premium monitor arm, engineered with these extra forces in mind. It stands rock-solid, alleviating all my concerns. Considering the cost of the monitor, this investment is worth it!

I hated, hated hated hated spending $400 on a monitor arm but I had a Vivo and before that an even cheaper one and my Vivos tilt mechanism broke and my 49" Samsung CHG9 came crashing down. So I decide to finally try to ergotron becaues I was sick of the cheap arms. It's worth it. It's a hard pill to swallow and I still think it's shockingly expensive but the thing is a TANK. I have to mount my 49" to the table myself with no help from another person and it was a NIGHTMARE with my VIVO but I had a really simple time with this one. You still need some muscle to hold the monitor up while you're sliding it around the desk but I always felt like my Vivo was going to get me killed. This was so sturdy I had no problems unscrewing it from the table and sliding it over a few feet while it was all mounted. Cheers great work Ergotron I'm a believer. Great quality. Heavy af.

Vorab die positiven Punkte: - sauber verarbeitet - Stabil - Befestigung als Klemme am Tisch - sehr stabil neutral: - keine Abdeckung für Klemmhalterung unterm Tisch - Preis Mein 34" Ultrawide Monitor ist gerade so an der Grenze mit dem Gewicht, jedoch nicht zu schwer sondern fast zu leicht. Ich musste die entsprechende Schraube komplett rausdrehen damit der Monitor gerade bleibt. Dafür kann aber die Halterung an sich nichts! Der Preis ist etwas hoch. Ja es ist ein hochwertiges Produkt und sauber verarbeitet usw. jedoch 260€ ist ein bisschen teuer! Bei rund um die 200€ wäre es sicher fairer. Aber alles in allem ein gutes Produkt und es erfüllt meine Anforderungen perfekt und hat keine Mängel.

Estable como ninguno, su precio es justificado una maravilla.

Nic lepszego nie znajdziecie. Jakość wykonania top. Każdy, nawet najmniejszy element ramienia ma sporą wagę i ma bardzo porządne spawy. Z łatwością utrzymuje mi (i ma jeszcze dużu zapasu) Samsung Odyssey G9 Oled 49". Polecam.

I recently got the Ergotron HX Mounting Kit, and I absolutely love it. It holds my LG49WL95C perfectly, providing a stable and secure mount for my large monitor. The build quality of the Ergotron HX is outstanding. It feels incredibly sturdy and well-constructed, giving me confidence that my expensive monitor is safe. The adjustable arm allows for a wide range of motion, making it easy to position the screen exactly how I want it. Whether I'm working, gaming, or watching movies, I can effortlessly adjust the height, tilt, and angle for optimal viewing comfort. Installation was straightforward, with clear instructions and all the necessary hardware included. The sleek design also adds a modern touch to my setup, and the cable management system helps keep everything tidy and organized. Overall, the Ergotron HX Mounting Kit is a fantastic investment. It combines durability, flexibility, and style, making it the perfect choice for anyone with a large monitor. Highly recommended for a top-notch mounting solution!

It’s really strong and tough duty for real