QUANS 10W 12V 24V DC AC Low Voltage LED Flood Light Lamp Floodlight Security Outdoor Waterproof Ultra Bright Black, 4 Pack Cool White

Very easy to mount and connect power. I have had these lamps for over 7 years. They still work well. Bought another set for another location in my house. Since the lamps are outdoor, the mounting brackets and associated screws tend to develop corrosion. Apply WD40 lubricant as a maintenance practice to extend the life. Particularly the four screws that are exposed to rain and sun.

We use these on a 24VDC outdoor lighting system and they are bright white!!! Really good illumination.

These lights are great. Been using some for over five years and are still working. One of the best and affordable lights I’ve found.

I have only been using the flood lights for a week, but the build quality of the lights was apparent just taking them out of the box. Full disclosure, I did modify mine a little bit by removing the factory power wire and wire gland and soldering in my own wire connectors to interface with the wiring already in place around my home and added a custom 3D printed hood of my own design to block and direct the light. By modifying the lights, I saw how great of quality these lights are. Most of these types of Floods I've bought in the past have appeared cheap in quality. Usually only the main body of the light itself that holds the LED chip was aluminum and the rest was thin stamped sheet metal that was painted. I've got many over the last year that have rusted from all the Florida rain. The only piece of stamped steel on these units was the mounting bracket. The entire light assembly from the main housing, back housing and cover, and trim ring appear to be cast aluminum. The screws also appear to be stainless, as it has rained everyday since the lights were installed and there is not even a spot of rust showing inside the head. My old ones rusted right away. I was sceptical at first becasue I've tried a few different lights that said were compatible with 24V AC/DC but as I later discovered, were not, but I do have them wired up to 24VDC and they work great. The photos show them up against my house and lighting up my 20 ft flag pole. On the picture of the front of the house the one closest to the driveway has my custom printed hod and the the one near the side is as it came. The other photos are a close up of where they are in relation to the house (still need to be permanently mounted) and how its mounted under the flag. I will be ordering these ones again.

I have twelve (12) of these lights in various locations on my property. They're great for the price and can not be beaten. HOWEVER, as they say, you get what you pay for and these bad boys are no exception! Every two years or so I need to order a box or two to replace the lights that burnt out or are on the fritz for whatever reason. This means I need 4 to 8 lights every few years. So the life span on these lights is shorter than my old man's temper, which is shorter than a used dynamite fuse. It is not ideal, but the cost is low enough, it doesn't keep me up at night. ANYWAY. You'll notice this time a light arrived with a cracked lens (see images I've uploaded). No worries, these things happen, right? And because they are replacing existing lights, I can just swap out the glass from the light I am discarding. Well, when I took the broken lens off the new light I noticed a few things: (see pictures) 1. The mount was not finished and was rusted on both sides. 2. The light/reflector was held in with two screws only. - I'm guessing that is why the lens was cracked. Someone overtightened the frame to compensate for the two missing screws. So, something has happened with these lights or this brand in general. The light arrived broken, was missing parts, & the hardware was not "finished". This was the case for two of the eight lights I had ordered this time around. If you are ok with replacing a few fixtures every few years or so, these lights will do you well. If you are looking for something a little more robust or something that will last, get something else. Consider a conventional bulb you can replace without having to toss and replace the whole fixture.

Needed a 12V LED floodlamp for the new horse ranch so we can see at night. I've used these before from a seller in China, waiting many weeks to receive the unit. Pleased to find this with Prime shipping for the same if not better pricing than straight from China from an Ebay seller. Quality is good. No stripped screws, LED's well centered in the reflector. Color was the same on all 4 units, and the throw and wide angle was what I expected. There is a real, current limited driver board driving the LED. Happily it was easy to modify the driver board by removing a resistor to drop the current output in half thereby lowering the brightness. Why would I want to do this? Because if it's too bright, you blow out your night vision when you're moving in and out of the lighted area. Another reason is that I was running these off a battery and half the current consumption = twice the run time. Successful, battery operated lighting for the ranch.

I installed these in my off grid cabin, unfortunately, the RF interference is so bad that whenever I turn even just one of them on, it kills most any radio station I have playing on the radio. I have not hooked up my ham radio yet, but expect it to hose my transmission / reception.

Used for 12v solar powered lights in chicken house

bought these for my remote cottage, which is solar powered running on 12V. They arrived quickly, well packaged and seem to be good quality. The leads are stripped and ready to wire. It is surprisingly small. Wired one into my back door as a flood light and can see 100 feet away easily in the night. Another lights a path to the lake. Have two left still, and would buy these again for sure if I needed more. Good buy

1 piece I received defective kindly replace

Worked well for the installation would buy again .

Super Duper !!!!!!!! work's great