KOHLER PureWash M250 Manual Round Bidet Toilet Seat, White, Quiet-Close Lid P...

This is easy to put together. This is a very basic and simple bidet. So you can’t control the water temperature which I don’t mind because I live in Southern California and it doesn’t get too cold, but I would imagine if I lived on the East Coast using this in the winter time might be kinda cold on the old starfish. That being said for the price, I bought two of these one for my master bedroom and another for downstairs.. I usually wipe my butt 20 to 30 times per duece, now I only do it twice. And obviously you’re not using toilet paper as much. I just use it after just to get some of the moisture out.

I've wanted a bidet for a long time, but I hesitated to get a non-electric one because I thought I'd want warm water. If I still lived in the frozen north, cold water might be an issue, but here in Texas, where cold water is never THAT cold, it's not a problem. I'm very happy with this bidet seat. In fact, I'm planning to order a second one for my powder room, because once you've used one of these, you'll never want to use anything else. I do have a couple of criticisms though. The first is that the seat itself is very lightweight plastic. It feels cheap. I bought a separate set of 4 bumpers to stabilize the seat on the toilet, but even after installing those, the seat still feels like cheap plastic when you sit on it. I'd pay a little more to have a better seat. That's not a big deal, but my second criticism is. It turns out that the 3-way T-adapter that came with this seat could only be threaded onto a KOHLER Fill Valve. Before installing the seat, I decided to replace the old FluidMaster Fill Valve inside the tank with a brand new FluidMaster Fill Valve. Everything worked great (no leaks) until I tried to screw the 3-way T-adapter onto the water inlet, which is actually the section of threaded shank at the very bottom of the fill valve that fits through the hole in the bottom of the tank. No matter how hard I tried, I couldn't get a decent connection. When I finally did manage to attach the adapter, it leaked, so I turned off the water and took everything apart. Then, with nothing else attached, and with the fill valve shank in one hand and the T-adapter in the other, I tried connecting the two, but still no luck: the T-adapter simply would not screw onto the fill valve threaded shank. When I looked closely, it appeared that the threads were different. So I went to the hardware store, taking the 3-way T-adapter with me, and once there, I headed straight to the plumbing department where I tried screwing the Kohler adapter onto a Kohler Fill Valve. Voila! Problem solved. So I bought a Kohler Fill Valve and once I installed that inside the tank, I had no more problems. This is a great product, but be aware that it may be necessary to use a Kohler fill valve when you’re installing this seat.

This is a pretty addition to any toilet but its functionality is marginal. It was easy to instal but using it is not as easy. The nozzle adjusting handle requires a large movement to get any nozzle movement. For a tall torso person like myself, it is quite a reach downward to operate the handle. The three nozzle tips offer a very small range of options as to the stream of water. One is almost zero and one is a scalpel. The middle is ok but not quite strong enough. The slow closing lid is nice and overall it works and i s of high quality.

The KOHLER 5724-96 PureWash M250 has some good design features a couple that are highly questionable. The total install took about 30 minutes. I like the way the seat attaches to the toilet and how the seat can be easily removed for cleaning with a push of the button on the side opposite the water inlet. As others have reported there are just not enough threads in the included hose coupling nut to properly engage with the Bidet's water inlet port with the added thickness of the screen installed. So I chose to remove the inlet screen in order to get an additional 1-1/2 threads of engagement. If that causes problems in the future I will deal with it. I also like that the controls are easier to reach than some other designs. This control design, however; does present a huge potential of damage in the future and this is probably the reason others have reported leaks at the control handle. With the handle hanging out so far I can see how easily it will be to damage it and cause leaks if anyones puts any sort of downward, upward or sideways pressure on the control handle. It should only have rotational pressure applied to it. It should never be used as a hand hold or as an aid for getting off the toilet. It's just not robust enough for that and that amount of pressure and will surely crack the plastic where the handle rotates, potentially causing leaks. All in all I am very happy with this Bidet and am confident with the proper usage it will stand the test of time.

**Second Update** OK, this Kohler bidet is garbage. First unit leaked and second unit sometimes leaks but recently the plastic that latches it into place broke. Engineered to fail. *UPDATE* In less than one month of using the bidet is leaking. As soon as you rotate the control arm water begins to leak out. I'm going to exchange it for another since I like everything about it, but it looks like this device wasn't engineered well since others are reporting the same thing in other reviews. ------------------------ So, 2 years ago I dipped my toes into the world of bidets purchasing an Alpha Bidet (version 1). It worked quite well for 2 years, but 3 things made me stop using it. 1. The gray rubber "feet" that you see on the Hibbetts model and Alpha model don't hold up. After awhile they start to tear and I ended up taking the feet from the lid and replacing the ones on the seat that tore (they bear the most weight). 2. The color is a bluish/purplish white that didn't quite match our Kohler toilet. 3. The way that it attaches to the toilet started to fail. The spring loaded quick release didn't click into place unless I pulled on it. So after getting rid of this I tried out the Brondell thin attachment. This installed easily and seemed well constructed. I was a bit wary of the thin plastic that the control attached to but underneath it has 2 pieces of metal for reinforcement. The issue with this one is it just doesn't hit the spot. On an elongated toilet I had to really sit back and lean forward which was uncomfortable. I'm not returning it because it was in our toilet and only $20, perhaps it'll see use another day. So, now to this bidet. First off, the color matches our toilet which is great. The rubber feet on the seat and lid seem much more durable than the gray feet on the Alpha bidet. Installation was a lot easier than the Alpha bidet as well, with the hardest part making the connections tight. The Alpha bidet had metal connections whereas this one is plastic. That's a bit of a shame. The seat itself seems much more durable than the Alpha bidet, but there is some squeaking of plastic under my keester. This one aims better than the Brondell attachment, but still doesn't match the sniper like accuracy of the Alpha bidet. However, using the control wand I'm able to strafe the "brown town" like a German Stuka in WW2. So far so good with this bidet, but if it fails miserable or starts leaking I'll be back to change my review.

I’ve always loved going to some high end hotels and finding an electric bidet toilet. It makes cleaning up so much more thorough. I didn’t think I could have one since I didn’t have an electric outlet near any of my toilets. I had heard a commercial about attachments to existing toilet seats. When I researched them, they looked clunky and just ugly since they are mostly visible. When I found the whole bidet toilet seat i was amazed. I did some research and settled on the Kohler puretide it looked great and sounded like it fit my needs. My only concern was that it didn’t heat the water but that was a small concern since I live in Hawaii - warm year round. Installation took about 20 minutes for each bathroom and that included removing the existing regular toilet seats. The connections were very easy to do and it looks great in the bathroom. The only thing that looks out of the ordinary is the handle and that’s fine - it’s easy to reach and maneuver when you’re using it. Some people have complained about the size of the seat opening being smaller than a normal seat - but that is to be expected. You’re working with a standard sized toilet boil and you have to find a way to fit in the bidet functionality. That takes up space and there’s no way around that - you have to fit in the bidet’s functions somewhere and there’s no way around that. Also note I am a man and have no problem using it and feeling cramped and uncomfortable down there. My only concern is that when I have people over to my place and they use the guest bath, I have to explain to them to not turn it on unless they’re seated - unless they want to get sprayed with water and have water all over the floor. I’m incredibly happy and wish i had known about this seat years ago! It works like a charm. The spray is very strong and I can direct it as needed. My concern about not having heated water was a non-issue since my cold water isn’t ice cold. It also looks clean and sleek in the bathroom. (Note - I used the softness score to indicate “fit and comfort”. I gave it 4 stars since it feels different than my previous seat (naturally) and takes a bit of getting used to.)

I have used a bidet attachment for several years and was looking forward to having the works built into the seat. I like Kohler's reputation for design and build quality, so I bought this one. I like the way it works, but it leaks. It leaks because the nut that attaches the seat hose to the seat is cross-threaded. It is cross-threaded because I found it nearly impossible to attach. The nut that secures that joint must hold a rubber washer and a screen that comes with its own washer attached. Their combined thickness make it nearly impossible to thread the nut onto the seat connection. Since that connection is on the left side and a bathtub surround sits about 15 inches away, I had to work with my left (non-dominant) hand from in front of the toilet, not from that side, which limited the force I could apply to compress the washers. The problem could have been avoided in several ways: 1. Supply a screen with no washer, or 2. Use a longer nut, or 3. Possibly change the order of installation so that the seat hose is attached to seat before the seat is attached to the toilet and before the hose is attached to the tee. The installer would then be free to manipulate the hose and seat while doing the difficult connection, and it would be much easier to see whether the nut is on straight before tightening it.

Update 04/01/23. I bought a 2nd one for an elongated toilet. The installation was easier this time since I ignored the instructions from the manual lol. Better instructions: 1. Turn off the water and drain the toilet bowl tank. 2. Put a pan under for water leakage and disconnect the inlet hose from the tank bottom. 3. Connect the water inlet hose and L shaped end of white bidet hose to T adapter. It's easier to do this before you install the T. 2. Connect T to tank. 3. Then installed the mounting bracket, in my case, as far from the water tank as it would let me so the seat can snap into place later. Pull the bracket towards you as you tighten the screws. Make sure the washer is installed the way the picture shows in manual (the only time I followed the manual). 4. Attach the bidet hose to toilet seat 5. Slide toilet seat onto mounting bracket until you hear a click. Check the button on the side to make sure it is not still depressed. When properly in place the toilet seat does not shift at all. Try pulling the seat towards you. If it slides forward, you didn't push it in far enough. This is the cause of all the reviews who say the toilet slides, shifts, or doesn't stay in place. Important: Ignore the instructions about turning it 1/4 past hand tightening with a wrench. You only need to hand tighten. In my first install, I used a wrench and overtightened it causing it to leak until I added plumbers tape. This time I only hand tightened, no plumbers tape and everything was fine. You just need to tighten it as much as you can by hand. These hoses all have rubber gaskets that will create a seal. If you overtighten it, the seal won't work properly and you will get a leak. Plumbers never use a wrench on these kind of connections which I learned later. You can always tighten with a wrench if you see any part leaking after you install. In my case, that wasnt needed. For reference, I have left my original review. Note that I no longer have a problem with wiggle in that toilet either after fixing it. After more 2 years, the 1st bidet is still working great! I've had to remove the spray tip a few times to clean it (easy), but otherwise no maintenance needed and no leaking. I still think this is a great manual biddet and that the bad reviews are due to bad installation. I don't know what people are doing to break that lever, for example. Did they twist so hard it somehow broke? Now my only wish is that I had an outlet behind my toilet bowl so I can install an electronic bidet. Cold water bidet in a new York winter is brutal! Lol But way better than not having one at all. 05/30/21 original review. I almost didn't buy this due to some of the reviews, but I'm glad I did. Replaced my tiny Dual Max Toto toilet seat (round) with this one. The hole is the same size length, a bit wider on the sides which is nice. I wish it was longer but I've already resigned myself to fate having gotten used to the tiny Toto seat. The seat stays up when needed and soft closes. It covers the entire back of my toilet so there are less places for dirt to show, and it comes off easily for cleaning. 1. Pretty easy to install. I overthreaded the t valve and had a scare (it leaked immediately from the little water left on the bottom of the tank), but was fine when I loosened it a bit. Do not overtighten like I did! Lol. Got smarter and used plumber's tape on all connections and only tightened with channellock one quarter turn. 2. The quality of the hardware and materials is superior. I don't understand the reviewers who said the washer was too small. It needs to be installed the long way. Of course if you align it on the long end with the hole it's not going to work. The picture in the instructions clearly show the proper way to install it. Don't worry about those reviews. It's simply improper installation. Actually, 99% of the bad reviews are due to improper installation. 3. The lever looks great and fit into my tight alcove no problem. Using the lever is a breeze and I love that you can adjust the position of the jet. 4. The water pressure is great and strong on full blast. I love that different size jets were included but they weren't needed in my case. 5. The seat does move a bit from side to side (my older seat also did that though not as much) and has a tendency to slightly skew to one side after using the lever which is a bit annoying. It's probably an intentional design to allow some give for the quick detach feature but it is annoying and one reviewer mentioned putting a piece of plastic to hold it in place which I might try. 6. Finally, I love the white hose. Nice touch, way nicer than my other hose connection and it really helps to hide it visually. Overall, a great bidet. Time will tell if it lasts. But I trust Kohler way more than anything else out there at this price range.

El producto cumple en tiempo de entrega y calidad especificada.

Great product and high quality. Only problem was that the t-adapter supplied in the box does not fit South African pipe fittings. I had to go to a plumbing supplies shop to buy an adapter before I could install it. Overall well worth the money.

Water supply T joint is not suitable for Australian standards and won’t fit , and it is size between 15mm and 20mm so forget about finding suitable adapter

I was looking add-on bidets but this one being integrated into the seat design made a lot more sense to me. I like that it comes with 3 different nozzles and the arm allows for adjustment of the spray angle while seated. The adapter is chrome plated metal not plastic. The soft close is nice too. I have this installed on a Toto elongated toilet. The fit isn't perfect but it is close enough and looks good in the closed position. The design is clean with nice styling.

The seat is so tiny. It’s sized for a little kid, really uncomfortable and now I’m unsure what to do with this.