2960 View Plus - Radon and Air Quality Monitor with PM 2.5, CO2, VOC, Humidity and Temperature Detector, Mobile APP, Wi-Fi , Notifications

i've used this for a few months. its very good and accurate enough for home use. kept in kitchen. display is good. batteries first installed 9 months ago and still going strong. app is also good and informative for current and historical readings. worth the cost.

Quality product. I bought it because I use a multi fuel stove and kerosene heater and was concerned about air quality. This monitor gives very comprehensive information. Don’t know how accurate it is but it’s responsive. On one occasion I burned an incense stick for just a minute and PM went straight up from usual 2 to 134. Batteries went down only by 16% in over 3 weeks. Strangely, it asked me to change the batteries shortly after switching on, so I did. However, I tested the batteries that came with the product and they were fully charged. Overall I’m very happy with it. Worth the money. The app works great.

While the device worked it was great. Nice interface via Android app and via the website. Historical charts were handy. However, after about 8 months the device would just refuse to connect to the Internet so it provides local only access (via device's screen) to the air condition at the moment (readings lost without Internet access). In attempt to fix I have tried factory reset/unpairing/setting up again so I have lost all historical readings. Infuriating! I am now trying to get support to advise but I am already regretting this purchase. UPDATE: few months later it become unresponsive again. I was able to use another phone to set it up. I've had to start another measurement as the old one is archived. Once I set it up with a new phone I have lost ability to control the device from both phones. It still feeds that data to cloud, at least. So far, support is pretending to be helpful. Apparently, Pixel phones' users are experiencing some issues. Well, now I also do have issues on Samsung.

This is one of four different air quality monitors I bought from Amazon at the same time. I purposely wanted to compare performance (accuracy in particular) to make sure I wasn't being taken for a fool and to reject anything that was just making up numbers (one of them was). As far as this product is concerned I feel that it has the most comprehensive and trustworthy data of all of them. Unfortunately it is also the most expensive by some margin. I don't mind paying for quality though, so that's OK. No point spending cheap just to be told some lies. Anyway, the app is excellent, with lots of data available and comprehensive graphs that are detailed and informative. I'm less impressed with the actual unit though. Having three other monitors to compare with, I find the physical display in the device to be distinctly underwhelming. Frankly it is near useless. Only two fields on display at any one time, assuming you have sufficient light to read them, but no indication of air quality unless you move over to the device and wave your hand CLOSE to it. No chance to glance at it and just see the air quality from afar. Air quality is not even a displayable field, so pick two random favourites from the sensors available and be left guessing about the rest. In contrast I have the Amazon AQM, which displays no data at all, but does allow you to see the coloured LED to check on the overall air quality with a casual glance. My other two AQMs either display all day at once or (can) cycle through the various data points one by one. Air quality is on display at all times. I think there is much room to improve the display on the View Plus. More data fields, backlight, always on LED. If the unit is plugged in, why wouldn't you want and expect 24 hour at a glance visibility? I can understand the wish to save power when running on batteries, but mine is permanently powered. Maybe a firmware upgrade can enhance the interface.

I ordered this Airthings View Plus air quality monitor as it seemed to be well regarded and more professional than the other ones available and it could also read radon gas levels, something which is rare in such a feature rich device like this one. It is one of the reasons it costs so much. What surprised me is just how fast CO2 levels build in a small-medium sized bedroom within a short space of time if the windows and doors are closed. I wasn't expecting that. I am talking about just a few minutes. The other one was the VOC (volatile organic compounds) reading. Mine was reading between 40 and 80 on average, within acceptable levels. However when I opened a moisturiser bottle to put moisturiser on my face and head as I suffer dry skin, the VOD reading jumped to nearly 4,000 in just a minute or so. It's amazing what is in the air we breath, and it is more often bad than good. I now use a air purifier in my bedroom and make sure my windows are always open slightly, even if it is cold outside. I am happy with my purchase, and I think the app is useful. There was an additional app I was offered to download that is just called Airthings, rather than Airthings Wave, and it is a little confusing why they have two apps that do the same thing, but it seems the one just titled Airthings is the one that's been updated most recently. I prefer the older Airwaves Wave app though as the layout is better and it gives you CO2 readings and radon gas levels earlier on after initial setup than the app just titled Airthings.

This meter is accurate and sensitive. I use it to monitor the air quality especially the VOCs emitted from my new furnitures. When windows are opened for ventilation, the number of VOCs goes down. It helps me to find a right balance on opening the windows as well as keeping the warm air inside the house in the cold days. Some findings are interesting… the VOCs suddenly went up dramatically for a few minutes last night, finally I found someone was smoking outside our house. What’s more, when I prepared the dinner, the PM2.5 went up quickly as well. The number went down after I turned on the hood. Radon gas is another issue I concern but luckily so far the reading is quite low at my place. Overall it is an amazing product. Updates on Jan 28 2022: it is out of order now after using it less than 2 months. The device loops itself(flashing green lights—>Breathe Better Live Better—> No reading ). No improvement after I tried to do all procedure. I tried to contact the support via “Chat with us” in the app for help( as indicated the warranty instructions) but after waiting for over 40 mins now, no one answer me. I will wait a couple of days for their reply. Updates on Aug 4 2022: Airthings asked us to send the broken device to them, and I receive my new device after around 4 weeks. Since then, it works well. I have no complaints:)

Edit: blew through it and it's fixed, must've been dust built up on the sensor! Original review as follows: Excellent device but two years in, it's malfunctioning regularly. Keeps reporting massive particulates until I take the batteries out and reset it. Works well again for a period then malfunctions again. Two years good service ain't bad I suppose, I'll probably buy the same device again as a replacement

Very good works perfectly from anywhere. Monitored my house in Devon while in Crete.

Un dans le salon et un dans la chambre. Je suis vraiment très satisfait, je n’en attendais pas plus, la qualité est vraiment au rendez-vous! Pour le Radon, il faut laisser plusieurs jours de calibration.

The Airthings View Plus has been an excellent investment for monitoring our home's indoor air quality. Our primary reason for purchasing it was long-term radon monitoring, especially to track seasonal variations and annual average levels. Based on our experience, the radon sensor appears to be highly accurate and reliable. One of the most valuable features is the mobile push notification system. We've configured custom thresholds for humidity, VOCs, CO₂, particulate matter, and other measurements, allowing us to react immediately whenever readings move outside our preferred ranges. The extensive alert and monitoring options are genuinely useful rather than just a novelty. It's also refreshing that purchasing the device gives you full access to its capabilities, historical data, and statistics. There are no paywalls restricting essential features or placing "must-have" functionality behind a subscription. It's also great to have full access to measurement history through the web interface in addition to the mobile app. Another major advantage is that the View Plus functions as a hub for other Airthings devices. We have paired it with a Wave Mini, and the two have worked together flawlessly for well over two years. Although the unit is normally powered by mains electricity, it also supports battery backup. We particularly appreciate that the batteries are reserved for backup operation rather than being unnecessarily drained during normal use. The power management has been excellent. The configurable measurement thresholds are flexible, the gesture controls on both the View Plus and Wave Mini are intuitive and convenient, and Airthings' customer support has consistently been friendly, knowledgeable, and helpful. The only unexpected behavior we encountered was related to the device location name. Renaming a location - for example, changing "Living Room" to "Lounge" - caused the historical statistics to be reset. We reported this to Airthings as a product improvement suggestion in 2024, so it's possible this behavior has since been revised. After more than two years of continuous operation, the system has proven to be exceptionally reliable. I can wholeheartedly recommend it to anyone looking for a comprehensive, high-quality indoor air quality monitoring solution.

Rilevatore di inquinamento assolutamente eccezionale, la cui unica pecca è il prezzo un po' alto. PRO: - Facilità d'installazione: si installa in pochissimi minuti, le istruzioni sull'app sono molto chiare e comprensibili. - Radon: uno dei pochissimi in grado di rilevare anche il radon, solitamente si deve comprare un dispositivo dedicato. - Personalizzazione: il dispositivo può mostrare 2 tra le tante informazioni che rileva (PM, CO2, Radon, Umidità, ecc...) - Può funzionare sia a batteria, che via cavo USB C, che con entrambe le fonti di alimentazione. - Ha un piccolo sensore sulla parte frontale che consente di avere un riepilogo degli inquinanti quando si passa la mano davanti. - Disponibile sia da APP che via browser, un riepilogo completo con tanto di grafici, dati medi, dati aggregati, ecc... - Il tutto ha già delle scale di valori per cui quando i valori diventano gialli o rossi si ha intuitivamente un idea sulla gravità degli inquinanti rilevati. - Possibilità di avere delle notifiche da App quando si superano le soglie su uno o più inquinanti. - Anche se manca la connessione a internet il dispositivo conserva le informazioni per qualche ora e se torna disponibile le carica con le altre. - Viene fornito già con un cavo USB --> USB C di una lunghezza molto alta, molto utile. CONTRO: - Non è disponibile la lingua italiana. - Prezzo un po' alto, preso in sconto a poco più di 200€, a 300€ non so se l'avrei preso. - Fa un piccolo rumore quando si aggiorna per rilevare gli inquinanti, può dare fastidio se lo si tiene vicino a dove si dorme, nel caso basta alimentarlo via cavo e staccarlo di notte. - Il display non è retroilluminato, quindi serve sempre avere una fonte di luce per leggerlo. Consigliatissimo.

We have two of these, gives great insight into indoor air quality, amazing how quick co2 levels raise in our well sealed home. Nice app which graphs the historical results. Would highly recommend.

El Airthings View Plus es un buen medidor de calidad del aire con varias funciones útiles. Se puede usar tanto con baterías como mediante USB-C. Cuando lo utilizas con USB-C, también puede funcionar como bridge para otros dispositivos Airthings, lo cual es un gran punto a favor. Lo que me gusta: - Alimentación flexible: batería o USB-C - Función bridge vía USB-C → muy útil si tienes varios dispositivos Airthings - App clara y fácil de usar - Actualizaciones rápidas: cada 2 minutos con USB-C, cada 10 minutos con batería - Soporte de API: funciona bien con Home Assistant, lo cual para mí es un gran plus - Pantalla e-ink: bajo consumo y aspecto limpio - Función “wave”: solo pasas la mano y te muestra un indicador de color sobre la calidad del aire Lo que me gusta menos: - Precio: se siente algo elevado - Precisión: suficiente para tendencias y uso general, pero no esperes precisión de laboratorio