Xiatiaosann 24 Pin to 6 Pin ATX Power Adapter Cable for HP Z230 SFF 18E4 / Z220 SFF Workstation, 24-Pin Female to 6-Pin Male P6 Connector 30cm 12-inch

Make sure you check the pinout before plugging it in. I had to use a depinning tool to correct the P2 connectors pinout. I drew a pinout for the HP 600 G1 SFF psu from the official HP spec page, I have also attached the original PSU spec that shows the point of view of the mating side of the connectors. On P2 I connected Fan_cmd to Fan Speed pin as a link to prevent the psu fan error on startup. On P2 I then connected ps on and pwr good connect to the usual ATX pins on the connector. Green and Grey wires. For anyone following along at home I have included the pinouts for the USB 2.0 and 3.0 connectors too so you can bridge / solder the 2 pins that are presence detect so that the mobo won't warn about those either. *Technical extras. Inside the heatshrink is a 5vsb to 12vsb boost converter + a shottky diode from the 12v rail to 12vsb. 2A dc-dc switching ic name SDB628*

Nach dem Einschalten kamen Rauchzeichen aus dem Stück mit dem Schrumpfschlauch. Den Adapter hätte ich mir schneller und besser selber basteln können.

Il dispositivo sto lavorando bene, ma per Z240 e più e necessario di cortocircuitare i contatti liberi di connettore 6-pin. Questo avvicinare il alimentatore da riconoscere il ventilatore non ATX-compatibile

これは買って後悔した。 めっちゃ詳しいわけではないが、それは正規品ではないから使えない。 お店でこういうのは使えないから買うなと言われた。

Très bien. Ras.

わかりきっていたことだが、Z240ではこのままでは使えない。 加工することによってFan errorは回避できる。