Chop Saw, Quick-Change, 14-Inch, Old Model (D28715)

I bought this from Amazon with help from a gift card I had received. The price was very comparable to Home Depot. The first and only chop saw I had owned was a tool sale special. It lasted about 8 years. Great value for the money. Not that easy to work with. I took this out of the box and cut some 1 1/2" square tubing. I changed between the 90 degree and 45 degree cuts with ease. Much better than the standard saw I had used before. Each swap was quick and easy. Usually I would try to cut each angle separately and then change to the other to finish all cuts. This was so fast and easy to change back and forth that I cut each piece as needed. I am a home hobbyist and wanted a durable chop saw that was going to last. I feel very confident in purchasing this saw. One of the good features of the quick change back stop is being able to move it forwards and backwards on the table with ease. This is especially useful when your blade gets smaller. Some of those cuts I couldn't make with a smaller blade, I think I can now. The blade that comes with the saw is great. Fast cuts and high quality. Due to a mistake on my part, I ruined the first blade. I didn't have my metal secured and it slipped and ruined the blade. Nothing to do with the saw, just me being stupid. Changing the blade was fast and simple. No tools required. Unscrew the knob and change the blade. The knob clicks when it is tight enough going on. Overall I would highly recommend this saw. I was going to buy it at Home Depot, but a friend gave me a gift card to Amazon and I used it with some money to buy the saw. Great purchase, quick delivery and it was free shipping. Actually cost me less than at Home Depot.

Fantastic product, love Dewalt

Item as described online. Seems to be well made and cuts well. Original blade is ok, but they have a little better blade, use it when replacing.

worked ok until it gets hot. then it wants to keep stopping.. other than that it got the job done.

Works as expected. I specifically got this saw just because its a 5.5 hp saw. Dewalt has a smaller hp saw that looks exactly like it, that is a 4.0 hp, which my friends have and it is too small. I bought an aftermarket stand for it and will couple it with an outfeed table to support my workstock. Its loud, but had plenty of power to cut 1/4" with easily. I found that if I forced the cut, I got blade deflection based on how fast I tried to cut. I see that there are thicker blades out there that should reduce that, but the kerf sacrifices more material. A Laser guide would be handy to align the blade to the cut line. I got some soap pencils to mark the steel which helps. I may explore an aftermarket laser. The challenge will be to find one that is reasonable the fits a 14" saw, most are 12" or smaller. .

This is a beast of a chop saw I love it 😀 😍 Dewalt is awesome..

It works well or better than trying a cut a peice of square tubing straight with a angle grinder. I bought this machine because I am a hobby metal worker. I used it to so far to cut up to 5/8" bar at an angle and 3/4" bar at 90 degrees and the heaviest tubing I have cut with it would be 1.5"X3.0" with 3/16" wall. For the retanglar tubing, it would start out a bit slow because of the flat top surface, but once you get it down in the thinner cross section, it will really start cutting. The only thing that I would complain about is the slow starts and some blade deflection because when you start, you have to push down pretty hard to get the cut started pushing the blade off a bit. There was some blade deflection on the 45 degree angle I cut on the 5/8" rod, but when I welded the part together, I just adjusted it to compensate. I payed [...] bucks for this chop saw. I know it is a Dewalt, so it should last and Amazon had the best price on this machine that I could find. 200 dollars. Most other places wanted between 215 to 225 for the same product, plus I had to pay for shipping from the other suppliers. I have yet to trip the breaker while using it either. When using the Milwaukee that was in my high school welding class last year, it had a tendency to trip the breaker, especially when it was being used hard. Over all I would buy this machine, weather your a hobbiest or a welder/ fabricator. This could have a place in your operation. I chose this over JET's small bandsaw, which was about $400. Plus the bandsaw took up some floor space, which is at a premium in my garage, while this chop saw I just set on the shelf in the corner.

Better quality than the Harbor Freight, Ryobi and Chicago types.

Nice saw, has handled decent material sizes pretty handily. One note is that for beveled and mitre cuts, the fence is held in place only by a locking cam lever and has no presets. Best to keep a square near this one at all times!

Great product

Great tools

works great

Very good product (Dewalt quality) but is expensive!