Pedaltrain PT-PB3 Pedal-Booster - Triple 10 X5.5 Inches

Used these risers on a vertex tour pro to help clean up some cable routing. The little bit of elevation & flat surface work great to hide some wayward cabling. Bonus points for including appropriately sized screws AND velcro. Would buy again.

Needed to give my HX Effects some lift on my PT Classic Jr. I’m only using Velcro on the contact points versus screwing it down. Works perfect, but it definitely puts more pressure and bulge on the top of the soft case when zipped shut.

I have had a PedalTrain2 w/hard case for a few years, and two of my favorite pedals were always a little low on the back row. They are a TC Nova Delay and MAXON FL-9 Flanger, and while the TC just needed height, the FL-9 with the Ibanez type switch also needed to be leveled because it was tricky to push down on the actuator at the stock pedaltrain downward angle. These are not cheap pedals, and it was really a bummer that I would have to perform an annoying dance to activate them, and many times would inadvertently hit the knobs of other pedal. Well I just finished installing and testing the Large Pedal booster, and it fit those two pedals perfectly. I was concerned because the Nova delay is fairly wide, but no problem at all. The booster velcro'd in nicely, both pedals fit just fine, and immediately I could use them easier than if they were on the floor because of the added height and fact they are both now level (YES!!). It honestly feels like a new board because all my pedals are equally useable and I no longer have to worry about messing up other settings. And most importantly, my pedalboard still fits perfectly into the hardshell case. You will need to lengthen the connecting cables a bit because of the added distance, but the little bit of work is totally worth the return. All and all, the PedalBooster was well worth the money, and I only wish they had made it a few years back. Highly recommended if you have some pedals that need a little boost or leveling.

Great for organizing pedalboards into separate levels or as a small board for up to three pedals, I have a couple of these. While using one for quick setups with several amps, on a larger pedalboard I reversed the booster to raised the pedal bottoms by 1” over the lower row that impeded switching the top row.

Does exactly what it's supposed to do... it raises the front of a pedal on the back of your board for easier access. I use this one with my Tech 21 VT Bass Deluxe, which is on the back of my board AND has a slanted footswitch area. I can reach every one easily now. Perfect size for the VT Deluxe, and other similar large pedals.

Bought one of these last month to use as a small pedalboard on its own. I used the included velcro (which, if you let it cure the 24 hours it suggests, works very well) and just slapped some rubber feet on the bottom. Now, I have a small pedal board that fits three MXR-sized pedals (with patch cables) that I can take with me if I don't want or need my full-sized board. While there's no room for a power supply, I'm not disappointed at all. It's small, seems to be made of a sturdy type of metal (I'm guessing aluminum, like all the other Pedaltrains), comes with enough velcro, and most importantly, is only twenty bucks. If you want a small, inexpensive - but sturdy and attractive - pedalboard, just put some rubber feet on this, and I'm sure you'll be happy.

Really useful for raising those hard-to-hit back row pedals to a perfect height. I use this for my Line 6 M5 and Boss RV-6, and they are so much easier to get to. It's worth the price for the build quality and convenience! Another great product from Pedaltrain.

Works as expected, boosts pedals for back row for easier tap dancing BUT mine did NOT come with the supposed included screws (however based on so many reviews panning how cheap they are maybe it's better I didn't!). It was obvious the package had been opened as the clamshell opened right up with little effort. Did come with Velcro but I prefer to screw mine on for stability during transport. Had to get my own screws (#8 pan head sheet metal screws, 3/8") which worked fine with a 1/8" drill bit.

It’s Pedaltrain… it’ll do exactly what you expect it to do and it will do it for years to come!

Use them for my Boss DD20 AND Boss MD 500, makes access easier 🎸👍

Sinnvolle Erhöhung der hinteren Pedale auf dem Pedaltrain. Kann mit beigelegtem Klettverschluss oder über die vorgebohrten Bohrlöcher per Schrauben auf das Pedaltrain montiert werden. Am Pedaltrain muss dann gebohrt werden. Bitte beachten, dass die Pedalboards "nur" eine "Leiterstufe" auf dem Pedaltrain überbrücken, so dass größere Pedals, die drei Stufen benötigen, ggf. mittig etwas "durchhängen". Bei mir halten aber alle diese Pedals trotzdem gut. Auf mein Pedaltrain pro (größtes Pedaltrain) passen maximal drei PB3 nebeneinander, leider nicht ganz bündig auf voller Breite des Pedaltrains, so dass ein noch wenig Raum übrig ist. Dennoch super. Würde ich wieder kaufen.

Perfect for PedalTrain Classic Jr. Very lightweight, but also sturdy. It fits perfectly along side ther double version on a Classic Jr.

Ojo, no os confundáis, no es un pedalboard. Es un suplemento para elevar mas algunos pedales de tu pedalboard. Aunque a ver.... también puedea emplearlo como pedalboard, aunque sólo te cabran 3 como maximo. Viene con velcro y todo.