3M Marine Adhesive Sealant 5200 (05203) Permanent Bonding and Sealing for Boats and RVs Above and Below the Waterline Waterproof Repair, White, 3 fl oz Tube

Great product. Works well at keeping water out but don’t get on your clothes. It will be there forever.

Great stuff! I saw other reviews that people did not get the nozzle, but mine had it. The tube is metal and the base of my tube was dented but it didn't prevent me from being able to use it. Be aware it takes 7 days to cure, and stays tacky for a couple of days. If you get any own your project or on your hands rubbing alcohol removes it when it's wet.

Purchased this product to attempt to seal a challenging flashing issue which has three different material in an awkward transition. I removed all the material from the previous two attempts to waterproof the area, leaving a larger than previous opening to work this material into. After cleaning and prepping the surfaces, I began to applying this 3M product. It is thick, but not problematic to dispense - possibly other reviewers were dispensing through a smaller orifice than me - I used the full tube opening without a tip. The product is exceptionally easy to manipulate and smooth out - almost putty like. Unlike other products like silicone and polyurethane, it didn't stick much to my applicator and thus stayed were I wanted it (without sag) and also smoothed out easily. Bottom line is it adhered to all three materials, filled the voids perfectly, looks great, and the leak is no more! I highly, highly recommend this product - it's amazing!

3M 5200 is absolutely the best $$ can buy. Perfect above and below the water line - every sailer needs to keep a extra aboard

Works great Takes forever to dry (defiantly not 3! more like 4-days -1 Star*)!! I got mine with the tip!! No holes, came just fine!! Stuff is great!! Strong with a little flex to it. Think caulk with strength.. For the reviewer talking about the tip not working? ?Poke a hole in the end of the tube! You do have to cut the end off on the nipple you screwed on!! Also there is a pop top lip on the bottom, you have to pull that off as well. Looks like you figured that out ok? But Yes you do have to cut the tip off and ----> poke a hole in the end of the tube as well!! Before screwing the nipple on!! So here is a recap... Poke a hole in the end where the tip screws on and cut the tip off the nozzle a little at an angle and pull the pop top pull lid off the bottom. Done P.S. Could have put my project together with just this no need for rivets as I was using Composite Aluminum Panels..

Perfectly sealed up the bottom of my boat that had a half dollar coin sized hole in it. The adhesive can be extremely hard to work with but you get the hang of it pretty quick.

TAKES 7 DAYS TO CURE Needed to reseal my 12v 100ah lifepo4 battery. My battery design is pretty dumb and they put the handle on the top lid which was only sealed with the bare minimum of a few dabs of some type of similar adhesive on the side that came undone. The only downside to ordering it online was that the nozzle was cracked at the bottom and broken off of the retainer ring but the nozzle was still usable. Ive used the 3m 5200 adhesive sealant before so I already knew what to expect. If you can use caulk gun you can use this..but make sure you dont get it on you or its really hard to get off. Gas will work but it sucks lol. i do wish I had gotten the 3m 5200FC that cures in 24 hours instead though.

This is the perfect waterproof adhesive for built up marine plywood laminated boat building. I used it on a curved balcony wall and it was stronger than a post and rail assembly. There is a learning curve as it will be stiff in cold weather and a tad soft above 75°. Very strong bond.

The 3M White Marine 5200 sealant is great as it solves the issue of mine. Zedi Online was excellent in customer service response, as Mr. Aman is so responsive to my emails and messages as he was so great to help me with the fast delivery. He really puts 100% effort into resolving the issue and helping customers like me. From delivering on time, to giving great communication. A big Thanks to Aman as well as Zedi Online😊

Incredible product for boats or anything that requires permanent repair or attachment. have used it on my boat and exposed to sun and weather for years, no deterioration.

Este pegamento es una bestia! Lo Utilice para unas botas y quedó incluso mejor que con la suela original, lo unico es que es dificil resellar

Great product. |Awesome adhesion and sealing qualities.

I actually use this to seal up busted drysuit seams. It's thick, but pliable, and takes forever to set, but in that time it seeps into the neoprene pores and fills anything from problematic pinholes to blowouts. stuffs tough and flexible, just a pain to use because of the cure time. worth it though