Keter Premier Tall 4.6x5.6 ft Resin Outdoor Storage Shed, Backyard Garden Shed with Shelving Brackets for Tools, Patio Furniture, Pool & Bike Storage, Grey & Black, 62 cu. ft Capacity

The best I have ever bought and I have bought a few in my time (Senior Citizen), good quality, easy assembly and it is 100% weatherproof ! Shelves cannot be overloaded - tend to bend a bit - however, that's an operator error and not the manufacturers'. Definitely 5 star.

The product itself is very good. It was relatively easy to put together as the diagrams were easy to follow.However we are struggling to find shelves to fit the product. Therefore if you wish to utilise the use of the brackets for shelving you will be very disappointed.

Sturdy cupboard, easy to put together.

It alright until something breaks, you can't buy spare parts and Keter don't want to know. Definitely not worth the money.

This is a good sized storage shed but if the plastic hinges break as mine did in a storm Keter can’t provide spares so you either have to right off (not good for environmental impact) or try and repair with fiberglass and resin.Will think twice about buying from this manufacturer again.

Cheap and full of gaps. Won't be waterproof as advertised. Plastic crap !

About what I expected it to be. Given that I live in the desert South West with xeriscape grounds, I don't have much and don't need much in the way of gardening tools to maintain my property. I began planning to build my own shed from scratch only to find out that the material was going to cost me as much if not more than this shed for the same benefit. It came as promised in a box that was in pretty good shape for its size and weight. After reading other reviews it became abundantly clear that this shed was going to require a flat, level and stable base for it to go together right and for the doors to work well. If you have a flat slab or a deck to situate it on, you should be OK. I had neither. I used 12 X 12 pavers to make the base and that project took a full work day. Your mileage may vary depending on your substrate. The assembly of the shed took me a little over an hour and could have been less if I had not run into a slight problem. For some reason, the panels were damaged at the bottoms. The edges were mushroomed out such that they would not fit into the base channels. When I figured out what was up I trimmed the panels with a utility knife and things went well after that. I say "for some reason" because as mentioned there was no damage to the box so I have to assume it happened during manufacture or perhaps packing. There was another strange condition as well. As you'll notice in the pictures there is a slot on the outside of one of the doors. Each door has a slot on the inside for indexing the position of the hinges but, one on the outside seems to have no purpose and probably shouldn't be there. The five stars remain as one issue was easily remedied, the other is just aesthetic not preventing the shed from being a shed and the door hinges are working well. I was able to find some shelving at the Orange Store by Rubbermaid that worked very well. They are 1/2" particle board laminated in vinyl with a gray color that compliments the shed. For the time being, I'm going to rely on the weight of the contents and a cement block to help the shed stay put but I'm thinking that won't be enough where I live as the next haboob just might take it for a ride. Concrete anchors are in order. This shed is nothing approaching what I could have built on my own but it is getting the job done for a bit less money and a lot less work. I won't be showing this thing off to the neighbors anytime soon but I am pleased with the purchase thus far.

Llegó bien, en buen estado, todo perfecto, buen tamaño.... lástima que no me fijé que no trae entrepaños y se los tuvimos que agregar, por lo demás bien.

The good:-Aesthetically I like the style.-Tall enough for garden tools, deep enough to add some half shelves to maximize space.-Bottom floor is formed plastic, seems fairly sturdy and is one piece.-Easy to put together with only one person and could be done with a screwdriver. (However, it is much easier to brace when applying force if you have a helper, much faster if you have a power drill, and a rubber mallet helps to negotiate the pieces into place without damaging them.)The bad:-Handles are different than the listing photos, and only have a weak little plastic clip to keep it shut. I would have preferred the one in the photo.-The walls are not very sturdy material. I dropped the box in my driveway while carrying it up, and a stray rock poked through the cardboard and was enough to crack through the wall partway. I do intend to install shelves with the provided brackets, but will not be putting anything heavy on them out of concern for the strength of the walls.-The door hinges themselves are metal, but the nubs they rest on to swivel are plastic. They seem kind of soft, and I’m a little worried how they might hold up over a few years.-There are some areas where the walls/doors meet the roof that seem a little poorly designed. Might not keep out the weather as much as I would like, but I do not intend to store anything fragile in there.Overall, if I have to buy a shed again I might try out one of the cheaper metal models. I know folks say they are also a pain to assemble, but for the price I don’t know if I would buy this again.

Buen producto

After researching and looking at various out door shed designs I decided to get this Keter shed.Although the instructions recommends two people at various points during the assembly process - it only took just myself about 1 1/2 hours to put this shed together properly from ‘start to finish’. Having said that - here is MY recommendations for having a “stress free” experience in doing this:1- ENSURE you have a properly prepared ‘base’ to set this shed on. You’ll want to have a FLAT - LEVEL & STABLE ‘base’ that will make FULL contact with shed’s plastic base! (Do NOT set the shed on ‘posts’ or any method that does NOT provide a LEVELED and solid base!) Again: I can’t stress this point more if you expect this shed to perform correctly and remain stable, square and long lasting!2- REVIEW the directions CAREFULLY - DO NOT ‘skip ahead’ on any of the numbered ‘steps’.3- Most, but not ALL pieces are carefully labeled and ‘match’ what you see in the assembly directions. HOWEVER: the ‘pictures’ and diagrams on the instructions can be ‘matched’ to any non-labeled pieces by carefully matching by ‘looks’. Take extra time to MAKE SURE you have PROPERLY ‘oriented’ any pieces BEFORE screwing them together!4- IF you use a impact drill to put in the screws: use the LOWEST torque setting so you don’t ‘overdrive’ and strip the screw insertion points. The shed is PLASTIC - so don’t overtighten the screws! Again: make SURE you don’t overtighten the screws for this shed!5- There are three different screw sizes used on this shed - make SURE you use the proper ‘sizes’ where indicated on the instructions.6- This shed comes with (12) small right angled ‘clips’ for installing two shelves. You will need to provide the ‘shelf material’ that you can get at any big box hardware store. The instructions recommend a 12” deep shelf - but you can go deeper if needed (16” to 18”). The width of the shelf needs to be at least 51” in order to ensure you have full ‘side to side’ contact - cut the shelf width accordingly.7- The finished ‘roof’ slants slightly enough to the back of the shed to permit ‘rain run-off’ (another reason to ensure you have properly LEVELED base that the shed is placed on!)8- The instructions say that you ‘can’ paint the walls of this shed. But - the plastic color is pleasant enough as it is - and I wouldn’t paint it and have to maintain the paint finish!9- There are two metal door hinges that you should ‘oil’ or spray some lubrication on the pivot points of the hinges.10- Step back after finishing up and ENJOY YOUR NEW KETER SHED!