Plastex Plastic Repair Kits - Plastic Adhesive - Easily Glue, Repair or Remak...

Takes a little practice, but there's plenty of how to videos on YouTube. I've been using it to go over all my motorcycle fairings. Using the mold also takes practice but you can definitely re make broken tabs. *tip* manufacturer video says to heat the mold on my a hotplate or stove- if you are not careful you can ruin the mold. Better drop it into a mug of water an microwave it. The powder/resin works like magic!! Sandable, drillable, it's like making new plastic.

It may not be pretty, but it worked! My Garmin 645 Music had a pin retaining hole break away and I had no way to keep my watch band secured. I got this plastex repair kit in black to match the color, and after a quick mix of the activator and the powder and dabbing the mixture onto the place where the break had occurred with a toothpick in place to keep a pin hole open, it was fixed! It took 30 minutes for the plastic to fully cure and I’ll be sanding it later to make the repair blend a little better, but this stuff was gel, and now it’s as hard as a rock and firmly adhered to the original plastic! I’ll post again later after it’s been exposed to a few shocks, but for now, I can whip my wrist, rap the counter sharply with the watch, and even pull gently on the band without the plastic breaking. If you have a small plastic repair you need to make, don’t hesitate. This stuff works well. Follow the instructions and make sure to get the right color. White, Clear, or Black.

Plastex repair kit works, but is expensive for the amount of money. This $16+ repair kit required $10 for shipping and handling (Even wiith my Amazon membership), which made the purchase $26. There was only a little amount, so it only repaired a small portion of my refrigerator drawer. I wonder if I should have just bought a new drawer for $62. Wish I noticed that I ordered black instead of clear. At least I can open my drawer better, despite it is still missing more edge

Excellent product! I have repaired so many different plastics that I could have with any other glue or adhesive that I have tried in the past. It is really a great way to repair hard plastics.

Worked extremely well.

I recall in the mid-70's the shop I worked at used a powdered plastic material and solvent to repair broken TV and radio cabinets. Back then the solvent may have been toluene, but now it's a kind of stinky methacrylate compound. Either way, this material kit works on most hard plastic chemistry types. Polyethylene requires a different kit, but Plastex offers this as well. So far I have only used the clear. It would be nice if they offered a range of tints to allow for color matching, but at least there is some hope for repairing plastic items in hope of restoring use. I particularly like the ability to restore broken screw mountings. Super easy to use. Fast drying.

Good amount of product worked well.

I gave this a shot to fix freezer drawers in which the slides had cracked due to the weight of the food. I was able to get a very solid (if not pretty) repair. It's holding well after 2 weeks. This is much better than any epoxy I have ever tried or any repair using CA glue and substrate. It seams to bond to the existing plastic extraordinarily well. One thing I would note is that the solvent will (unsurprisingly) melt the existing plastic and cause it to haze. Tape any areas where the solvent may flow (such as under the molding bar) that you want to protect.

product worked good on my ATV broken plastic fender

Worked like magic but the part I needed it for repair broke off with some pressure. I'm sure it would work for repairing other things on a motorcycle.

In my opinion, Plastex is the best product on the market for repairing cracked motorcycle side covers. We were also able to re-attach a broken-off mounting tab on one cover. With practice, the product can be applied in a few different ways, all described in the included instructions as well as YT videos. The best crack repair is obtained by following their instructions; using a Dremel or sharp tool, "trench out" the crack to create maximum surface area, then fill. The resulting bond is strong and flexible. We also succesfully repaired our refrigerator's cracked vegetable drawer as well as a broken part of the fridge door. Having ordered the product in black, I found the dried colour to be a bit washed out. Since most visible repairs will likely be refinished, I have ordered my next batch in clear. The standard kit provides ample product for numerous repairs. Overall, an excellent product for plastic repair.

The kit arrived in perfect condition and contains quite a bit of product. I am thoroughly impressed with how well it works! We were able to repair the latch on my center console (I forgot to take a before photo) and it's holding together really well so far! It's better than the super glue fix I had done previously which had to be reapplied often due to it not adhering, but the Plastex repair hasn't budged at all! The adhesive is strong/durable and worked well even on such a small fix. The application process was straightforward, with clear instructions that made it easy to follow. And they even have a link to videos showing how to fix various items, which helped! Fixing the latch didn't use that much product either, so I reckon I can fix many smaller items with this kit! I also appreciate that it is suitable for various types of plastic, making it a versatile addition to my toolkit. Overall, this product exceeded my expectations in terms of effectiveness and ease of use. It's a must-have for anyone looking to repair plastic items without the need for professional help. Highly recommended!

Is very working for my fairing, good product!!