Westinghouse Lighting 7224900 Widespan Industrial Ceiling Fan with Remote, 100 Inch, Brushed Nickel

Ordered in Jan of '23 for my shop build. life happened and the build took longer than expected. Fan sat in the box, on a shelf since delivery. Electricians opened yesterday (6/22/2023) to find the control module cracked and the fan does not work.Update: review changed to 4 stars. After much waiting and back & forth with westinghouse, i got replacement part in the mail free of charge. The only reason this review is not 5 stars is because it took 3 weeks to get the desired result and 9 days for anyone to get back to me after leaving messages initially.Great fan! Moves some serious air!

Edit: six-month update--still love this thing. Still absolutely silent; working without issue. Never cease to be amazed at how much air it moves--stirs up dog hair we didn't even know was there. Remote still feels astonishingly cheap. Still haven not gotten around to ripping the codes to use with Home Assistant. I'm a slacker, I guess. The original review follows:So I wanted to hook up a ten-foot (10') downrod to this thing, 'cause I've got a two-story, vaulted ceiling I'm working with. I did it and it works just fine--and it didn't even cost me that much. I bought a ten-foot 3/4" galvanized steel "structural pipe" from Lowe's. Cost me like $25. I am 99% certain it's made from the same factory that makes downrods. Looks identical. Same beveled edges and everything (it's not threaded). I had to drill a 1/4" hole through it in both sides, for the retaining pins. The center of the hole is 1/2" from the end of the pipe (the one closer to the fan is *maybe* a hair closer--pay attention to this, 'cause you've got less room to work with here--the top one, connected to the ball/bracket, won't really matter if it's off a little).I then had to extend the wiring. The inverter is up in the canopy, so it's not just a matter of extending the AC wiring--you gotta cut into their custom wiring for the DC & control stuff. Wheeeeee always fun to cut the wires on the $600 fan you just bought. I'm sure this will void the warranty. You're probably voiding the warranty just reading about it. Don't try this at home. Only a madman would do this. Anyway, I cut the wires, then spliced and soldered some 10' extensions. There are five wires. Three are 18 gauge, two are 22 gauge. I bought some wire from Amazon, was around $25. I already had some heat-shrink, but would've just covered it with electrical tape if I hadn't. Remember to slip the heat shrink on *before* you solder the wires!Just to be on the safe side, I also extended the steel safety cable. I bought some steel rope (thought it was the same size, but I think it was actually a size smaller than what's already on the fan) and some loops, aluminum crimps, and crimping pliers. I'm confident the cable would support my weight if I hung from it, so I figure the fan is fine.I was nervous when I got it hung and wired. It was a huge pain in the butt. Very heavy. I'm lucky I had some scaffolds to work on and a forgiving and very helpful partner.The blades are relatively easy to install. The instruction manual doesn't tell you this, but the bolts and nuts are all 10mm. The manual also doesn't tell you where the flat washers go. It also doesn't tell you how many of each part you have, the little crescent gaskets it shows are *not* included, and it doesn't tell you wrench sizes for anything. You'll notice that in the questions for this product, someone asked where the flat washers go, and the seller was all like, "iT's iN tHe mAnUaL"Yeah, it's not. I've included a pic of the only page showing the blade installation here, along with the bolts and washers you're given, and obviously, the manual doesn't show you anything of the sort. The bracket that the blades attach to is steel, so I figured the split washer would be okay against it, and used the flat washers underneath the blade, between the blade and the nut. It seems to have worked fine and feels pretty secure. I secured mine using a 10mm wrench on top and a 10mm ratchet socket on the bottom.When you're putting the blades on, start with the single bolt furthest from the center of the fan. Drop the bolt in from the top, press the blade up against the bracket, then place the flat washer and nut and hand-tighten them. This gives some "leverage" to the blade, so you don't have to keep holding it, and the other two can be relatively easily placed, then you can tighten all of 'em with a wrench & ratchet or whatever.I did opposite blades each time, so the thing didn't get too off-kilter or something.I also tested it after installing the first two, in case I had borked the wiring somehow. Thankfully, it worked great.This thing is really quiet. Amazingly so. I like it.The remote feels like a cheap piece of garbage you'd get from the Dollar Tree or something. I plan to yoink the rf codes and set up an rf repeater with Home Assistant, so I can tell Alexa to turn the fan on. My wife will think that's cool.Anyway, it works well. It was expensive, but feels pretty decent. I'm happy with the ten-foot downrod (it's a slightly different color of metal than brushed nickel--sorta blue-ish--but it doesn't bug me too much) (note--Lowe's also sells this stuff in black, if you wanted to get the black version of this fan--not sure if the blacks would match, but it's black, so unless you're Tom Haverford, you probably won't notice (if you get that reference, I love you)). It moves a LOT of air--I could feel it even on the lowest setting. You'll see the paper lanterns in the pic (hey, sue me--they were cheap--have you priced lighting lately?); they get blown around a little, which is mildly annoying. Even on its highest setting, I can't hear it, but it's moving air like crazy. Pretty awesome.Good stuff.

I have a shop with 14 ft walls and these work great. Move air well and very quiet. Run smooth as silk as well. They come with a pretty long drop rod which was nice. Very easy to install. I couldn’t be much happier. I have a big 48in shop fan but it’s super noisy. These fit the bill nicely.

I got this fan because it has the best warranty (lifetime motor 2 years parts. It is easy to install and well made. I put the speed 2 and you can't here it . even on 6 you can't here it. it really moves the air. I am very pleased.

We built a garage and this fan was a must! Hubby thought it would be too big but it is perfect! Even on low speeds...you can feel the wind. A great quality item...so happy with my purchase.