VIVOAdjustable Under Desk and Wall 3.5 to 7.8 inch Wide Office PC Mount, Computer Case CPU Machine Holder Stand with Swivel and Secure Locking, Black, MOUNT-PC01

Install took about 30min and holds my desktop well. Mount is sturdy without taking much space. Also like that I can wall mount it in the future if my setup changes.

Initial impression is good build quality, still holding my Mid-ATX tower after two weeks.Keep in mind that it rotates smoothly 90 degrees in one direction, but only about 20 degrees and with some difficulty in the other. For my use case it works perfectly, but if you need it to rotate completely in both directions you'll be disappointed.

I've used this for the better part of the year, and it works well. My case was a touch wider than it's max adjustment setting, so I bent the top part to hold it in place. That said, it's hokds remarkably well and is very sturdy. All hardware needed was in the box. So, it's a bit on the small side, but holds well.

Fist of all, this mount does exactly what it's designed to do, which is to hold a CPU within a specified size range. As far as I could tell from my own measurements, Vivo's specifications accurately reflect the size CPU case this mount will accommodate. Frankly, most modern CPU's will fit this mount with room to spare. CPU cases have shrunk considerably in recent years, the major exception being gaming PCs, in which case a more expensive mount is warranted. It is unfortunate that so many buyers have chosen to vent their anger at having ordered the wrong mount by giving it mediocre ratings. To echo one of the other reviews, don't drill into your desk until you've checked to see that your CPU will fit this mount. However, if you do, please don't blame Vivo for your mistake. It isn't fair to those for whom this mount is perfect.That the height isn't continuously adjustable should not be an issue for most. Unless the intent is to mount this in an SUV and take it off-road, a properly seated CPU isn't going to go anywhere. The top of the CPU is held in place by a clamp from the side and as long as the clamp is made snug with the CPU, not even a minor earthquake should shake it loose. I doubt the internal components of the CPU are mounted as securely. Potential buyers shouldn't be deterred by by reports of a gap between the case and the top of the mount. If your CPU's dimensions will fit this mount, this is an incredibly solid mount and a real bargain.Before I proceed, let me state for the record that my computer is an iMac, so there is no CPU case. What I have is a CyberPower 1500VA uninterruptible power supply, which is similar in size and shape to that of a CPU case. In fact, it's heavier than most CPUs, but still well-within specs for this mount. I have a small desk with no space available underneath it, but a lot of space behind it, so this mount is a perfect way to get the UPS out of the way, yet keep it accessible for plugging in a multitude of components. The top is wider that the available space, even set at the minimum size, but I was able to mount it high enough on the back of the desk that it clears the window sill, fitting perfectly. The top of the mount was a perfect place to mount a Vivo dual-arm VESA mount, and all I had to do was to remove the existing, rotating bracket and use the existing holes for the attachment. It was as if they designed it with that in mind.Overall, I can find no fault with the construction of the mount. It's designed for multiple points of attachment to a desk, including mounting it under a desk, and the mount is very solid and sturdy. Adjustments for the size of the CPU are very easy to make and the mount should accommodate a wide variety of CPU cases (or UPS units), except perhaps for do-it-yourself computers built in oversize cases, and oversize gaming PC's, especially those with liquid cooling. Even with the modifications I made to attach a dual VESA stand to the mount and to install a UPS, installation took less than an hour using a cordless drill, some driver bits and a set of wrenches. I could not be happier with the simplicity, versatility and sturdiness of the design

Much stronger than ever expected!!!

The idea is cool depending on the desk might be easy might be hard mines was middle difficulty but the holder didnt open wide enough to support my tower so i have it sorta on but but not all the way but held with double side tape , i think next revisions make it a little wider maybe about 2 inches MAX other than that sturdy the screws werent to long just right so they didnt pop out the other side of my desk

This is my second VIVO mount, the other holds my monitor. This PC mount is sturdy, and includes all the hardware you need.I made a paper template to help drill pilot holes under my desk. The mount was very sturdy once screwed into the desk. I replaced the thin foam pads with sturdier felt before putting my PC into the mount.Lifting the PC into place and tightening screws was a bit awkward, so I got the scissor jack from my car and used it to lift and hold the PC in place while I tightened everything up. It worked perfectly.Very satisfied with this - highly recommended!

I bought this to go with my new adjustable sitting/standing desk, thinking everything would integrate nicely. Especially since I shelled out the extra bucks for a VIVO desk. (Electric Corner L-Shaped 63 x 55 inch Standing Desk, Height Adjustable) I should have known better. This thing is ok(ish), but due to the nature of how it bolts together, it's very hard to get it to hold my PC nicely. Also, I've had it for about 6 months now, tried it in several locations, and there is no right place on this desk where it looks nice and is located in a place where it's not in the way. Maybe a regular desk without the up/down mechanics of a standing desk would be ok. Not so much for this one. I would have been much happier with one of the little wheeled carts that sit under the desk instead. Oh well, live and learn!NOTE: my PC is a mid-sized tower. A small one would be much better. Also, the mount is heavy and very awkward to try to mount under the desk, especially without help.